This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.
Check it out on amazon.com →The Message Class N2M (Global Trade: Positionstyp-Management) is a standard Message Class in SAP ERP and is part of the package WB2BPOSTYPMNGT.
Message Class | N2M |
Short Text | Global Trade: Positionstyp-Management |
Package | WB2BPOSTYPMNGT |
ID | Language | Text |
---|---|---|
001 | D | Es wurde keine Assoziationsart übergeben (interner Fehler) |
002 | D | Zur Assoziationsart &1 existieren keine Daten. |
003 | D | Der Text zur Assoziationsart &1 ist in der Sprache &2 nicht vorhanden |
004 | D | Es wurde keine Assoziationsgruppe übergeben (interner Fehler) |
005 | D | Zur Assoziationsgruppe &1 existieren keine Daten |
006 | D | Der Text zur Assoziationsgruppe &1 ist in der Sprache &2 nicht vorhanden |
007 | D | Es wurden keine Assoziationsdaten selektiert |
008 | D | Es wurden keine Kumulierungsdaten gefunden |
009 | D | Es wurde keine Belegart übergeben (interner Fehler) |
010 | D | Die Belegart &1 ist nicht bekannt |
011 | D | Es wurde kein Name für den Control Container übergeben (interner Fehler) |
012 | D | Es ist ein interner Fehler aufgetreten |
013 | D | Markieren Sie genau eine Positionszeile |
014 | D | Es ist ein interner Fehler aufgetreten |
015 | D | Markieren Sie eine Positionszeile |
016 | D | Zu der ausgewählten Belegart ist noch kein Coding implementiert |
017 | D | Der Positionstyp &1 ist nicht der Trading-Kontraktart &2 zugeordnet |
018 | D | Zur Belegposition gibt es Assoziationen, löschen nicht möglich |
019 | D | Änderung des Portfolios ist nicht erlaubt |
020 | D | Interner Fehler bei der Ermittlung der Assoziationsart |
021 | D | Interner Fehler bei der Aktualisierung der Assoz.-Daten |
022 | D | Interner Fehler beim Lesen der Positionsdaten aufgetreten |
023 | D | Interner Fehler bei der Ermittlung der Assoziationsgruppe |
024 | D | Keine führende Mengeneinheit in Assoziationsgruppe &1 gepflegt |
025 | D | Anzeige-Mengeneinheit ist nicht ermittelbar (kundenseitiger Kontrakt) |
026 | D | Anzeige-Mengeneinheit ist nicht ermittelbar (einkaufsseitiger Kontrakt) |
027 | D | Änderung der Mengeneinheit nicht mehr erlaubt |
028 | D | Die Änderung der Menge ist nicht erlaubt |
029 | D | Interner Fehler beim Lesen einer internen Tabelle aufgetreten |
030 | D | Löschen der Position nicht erlaubt |
031 | D | Es werden keine Assoziationsdaten für die Position &1 angelegt |
032 | D | Keine Reassoziationsstrategie gepflegt |
033 | D | Keine Assoziationsgruppe für Position &1 vorhanden |
034 | D | Interner Fehler bei der Aktualisierung der Kumulierungsdaten |
035 | D | Keine Assoziationsdaten zum Beleg &1 vorhanden |
036 | D | Interner Fehler bei der Aktualisierung der Assoziationsdaten |
037 | D | Fehler bei der Assoziationsbearbeitung, bitte Fehlerprotokoll beachten |
038 | D | Es wurde keine Sperrgruppe übergeben |
039 | D | Zur Sperrgruppe &1 existieren keine Daten |
040 | D | Der Text zur Sperrgruppe &1 ist in der Sprache &2 nicht vorhanden |
041 | D | Es wurde keine Belegart übergeben |
042 | D | Zur Belegart &1 existieren keine Daten |
043 | D | Der Text zur Belegart &1 ist in der Sprache &2 nicht vorhanden |
044 | D | Keine TEW-Art übergeben (interner Fehler) |
045 | D | Änderung der Assoziationsgruppe ist nicht erlaubt |
046 | D | Pflegen Sie bitte eine Assoziationsgruppe zur Position &1 |
047 | D | Pflegen Sie eine Umverteilungsart |
048 | D | Beleg &1 wird nicht gesperrt, da Bearbeitung nicht unterstützt |
049 | D | Zu Beleg &1 können keine Assoziationsdaten gelesen werden |
050 | D | Keine Kumulierungsdaten vorhanden |
051 | D | Keine offene Menge mehr vorhanden |
052 | D | Keine assoziierbaren Positionen gefunden |
053 | D | Es wurde keine TEW-Art übergeben |
054 | D | Es wurde kein Geschäftsprozeßschritt übergeben |
055 | D | Keine assoziierbaren Geschäftsprozeßschritte vorhanden |
056 | D | Keine Kumulierungsdaten gefunden (interner Fehler) |
057 | D | Es liegt keine einseitige Position vor |
058 | D | Basisbeleg nicht ermittelbar |
059 | D | Keine Mengeninformationen gefunden (interner Fehler) |
060 | D | Keine Informationen zu Folgebelegen gefunden (interner Fehler) |
061 | D | Keine Infos zu TEW-Art und Prozeßschritt gefunden (interner Fehler) |
062 | D | Es wurden keine Daten übergeben (interner Fehler) |
063 | D | Die Bearbeitung des Belegs &1 wird nicht unterstützt |
064 | D | Geschäftsprozeßschritt konnte nicht ermittelt werden |
065 | D | Keine Positionen mit offener Menge gefunden |
066 | D | Keine Informationen zum Basisbeleg gefunden (interner Fehler) |
067 | D | Die neue Assoziationsmenge 0 ist nicht erlaubt |
068 | D | Die Menge der Position, die die Assoz. erhalten soll, reicht nicht aus |
069 | D | Die Menge der assoziierten Position reicht nicht aus |
070 | D | Die offene Menge in den Kumulierungsdaten ist nicht ausreichend |
071 | D | Keine assoziierten Positionen gefunden |
072 | D | Keine Assoziationen für Position &1 möglich (Materialnr. nicht gepflegt) |
073 | D | Keine Assoziationen für Position &1 möglich (Portfolio nicht gepflegt) |
074 | D | Keine Assoziationen für Position &1 möglich (Keine Kumulierungsdaten) |
075 | D | Es existieren noch keine Assoziationen zur Pos &1. Anlage ist möglich! |
076 | D | Beleg &2, Position &3 ist bereits assoziiert |
077 | D | Assoziation kann nicht auf Folgeposition übertragen werden |
078 | D | Assoziation kann nicht auf Folgeposition übertragen werden |
079 | D | Anlegen einer Position mit Referenz zu Assoziationen nicht möglich |
080 | D | Anlegen einer Position mit Referenz zu Assoziationen nicht möglich |
081 | D | Anlegen einer Position mit Referenz zu Assoziationen nicht möglich |
082 | D | Anlegen einer Position mit Referenz zu Assoziationen nicht möglich |
083 | D | Anlegen einer Position mit Referenz zu Assoziationen nicht möglich |
084 | D | Anlegen einer Position mit Referenz zu Assoziationen nicht möglich |
085 | D | Beleg &1 ist gesperrt, Anlegen einer Pos. mit Referenz nicht möglich |
086 | D | Die offene Menge der referenzierten Position ist gleich Null |
087 | D | Keine Positionen zum Assoziieren ausgewählt |
088 | D | Keine Menge zum Assoziieren ausgewählt |
089 | D | Interner Fehler beim Anlegen einer Position mit Referenz zu Assoziationen |
090 | D | Die eingegebene Menge ist zu groß |
091 | D | Anlegen einer Position mit Referenz zu Assoziationen nicht möglich |
092 | D | Automatische Reassoziation nicht möglich, da Belege gesperrt sind |
093 | D | Beleg &1 ist gesperrt, Assoziationen können nicht bearbeitet werden |
094 | D | Die eingegebene Menge ist zu klein |
095 | D | Die erfaßte Menge ist zu groß |
096 | D | Vorgänger-Assoziation nicht eindeutig ermittelbar |
097 | D | Vorgänger-Assoziation kann nicht übernommen werden |
098 | D | Vorgänger-Assoziation kann nicht an Folgepos. weitergegeben werden |
099 | D | Es ist ein Überlauf bei der Kalkulation der Mengen aufgetreten |
100 | D | Die Umverteilungsstrategie &1 wird noch nicht unterstützt |
101 | D | Es existiert keine Bestandszuordnung zu Beleg &1, Position &2 |
102 | D | Die zur Batch-Nummer &1 erfaßte Menge ist zu groß |
103 | D | Die zur Batch-Nr &1 assoziierte Menge ist größer als die erfaßte Menge |
104 | D | Die erfaßte Menge ist zu klein |
105 | D | Keine Daten für Assoziationsauszeichnung verfügbar |
106 | D | Bitte nur einen Eintrag zur gleichen Belegart markieren |
107 | D | Keine Assoziationsdaten bei Assoziationsauszeichnung gefunden |
108 | D | Pflegen Sie bitte den Reservierungsmodus |
109 | D | Trading-Kontrakt &1: kein Assoziationsmanagement möglich |
110 | D | Trading-Kontrakt &1: kein Assoziationsmanagement möglich |
111 | D | Trading-Kontrakt &1: kein Assoziationsmanagement möglich |
112 | D | Trading-Kontrakt &1: kein Assoziationsmanagement möglich |
113 | D | Zur Position &1 können keine Assoziationen angelegt werden |
114 | D | Es liegt eine 1:n - Beziehung vor |
115 | D | Für die Position &1 sind keine Assoziationen erlaubt |
116 | D | Für die Position &1 sind keine Assoziationen möglich (kein Portfolio) |
117 | D | Interner Fehler im Funktionsbaustein &1: kein Assoz.-Partner gefunden |
118 | D | Kontrakt &1 ist noch nicht freigegeben, Pos. &2 ist kein Assoz.-Kandidat |
119 | D | Kontrakt &1 freigegeben, Positionen als Assoz.-Kandidaten verfügbar |
120 | D | Freigabe des Kontrakes &1 zurückgenommen |
121 | D | Assoz. zw. den Prozeßschritten &1 und &2 dürfen nicht geändert werden |
122 | D | Assoz. zw. den Prozeßschritten &1 und &2 dürfen nicht gelöscht werden |
123 | D | Bitte nur einmal zur gleichen Position assoziieren |
124 | D | Reassoziationsstrategie nicht sinnvoll, da keine automatische Reassoz. |
125 | D | Beidseitiger Trading-Kontrakt: man. Ändern d. Assoziationen nicht möglich |
126 | D | Die Position ist nicht vollständig assoziiert |
127 | D | Die Position ist abgeschlossen: Löschen der Assoziation ist nicht erlaubt |
128 | D | Die Position ist abgeschlossen: Ändern der Assoziation ist nicht erlaubt |
129 | D | Assoziationsauszeichnungen wurden gesichert |
130 | D | Assoziationsauszeichnungen wurden übernommen |
131 | D | Assoziationen wurden mit temporärem Status gesichert |
132 | D | Reassoziationen wurden gesichert |
133 | D | Assoziationen wurden gesichert |
134 | D | Verringerung der Assoziationsmenge um &1 &2 nicht möglich |
135 | D | Menge zu groß, automatische Anpassung der Assoziationen nicht möglich |
136 | D | Menge ist kleiner als die Menge, die mit Auslieferungen assoziiert ist |
137 | D | Die neue Menge ist kleiner als die assoziierte Menge |
138 | D | Kumulierungsdaten fehlen, automatische Anpassung der Assoz. nicht möglich |
139 | D | Fehler bei der automatischen Anpassung der Assoz., Protokoll beachten |
140 | D | Die erfasste Menge ist zu gross. |
141 | D | Die zur Batch-Nummer &1 erfaßte Menge ist zu groß |
142 | D | Keine Daten in interner Tabelle gefunden (interner Fehler) |
143 | D | Fehler in der Assoziationsbearbeitung |
144 | D | Es ist ein interner Fehler aufgetreten |
145 | D | Assoziationen mit temporärem Status und Assoziationsauszeichn. gesichert |
146 | D | Bitte eine Zeile auswählen |
147 | D | Die Pos. ist nicht assoziiert. Assoziationsauszeichnung ist nicht möglich |
148 | D | Die Menge für die Assoziationsauszeichnung ist gleich 0. |
149 | D | Für Beleg &1 wurde keine Assoziationsauszeichnung vorgenommen |
150 | D | Für Beleg &1 wurde keine Assoziation angelegt |
151 | D | Info: Einkaufs- und verkaufsseitige Position gehören zu versch. Chargen |
152 | D | Inkonsistente Umverteilung: zu grosse Menge wurde zugeteilt |
153 | D | Inkonsistente Umverteilung: umzuverteilende Mg. nicht korrekt umverteilt |
154 | D | Unbekannter Wert &4 durch Methode &1 zurückgeliefert. |
155 | D | Die zum Lagerort &1 erfaßte Menge ist zu groß |
156 | D | Die zum Lagerort &1 assoziierte Menge ist größer als die erfaßte Menge |
157 | D | Die zum Lagerort &1 erfaßte Menge ist zu groß |
158 | D | Die zu Lagerort &1 und Batch-Nr &2 erfaßte Menge ist zu groß |
159 | D | Die zu LgOrt &1 u. Batch-Nr &2 assoziierte Mg. ist größer als die erfaßte |
160 | D | Die zu Lagerort &1 und Batch-Nr &2 erfaßte Menge ist zu groß |
161 | D | Info: Einkaufs- und verkaufsseitige Position haben verschiedene Lagerorte |
162 | D | Löschen der Pos. nicht erlaubt, da Assoziation nicht gelöscht werden darf |
163 | D | Löschen der Pos. nicht erlaubt, da Nachfolgeposition bereits existiert |
164 | D | Keine Informationen zu Belegposition gefunden (interner Fehler) |
165 | D | Änderung der Assoziationsmenge nicht möglich |
166 | D | Änderung der Assoziationsmenge nicht möglich |
167 | D | Es ist ein interner Fehler aufgetreten |
168 | D | Die erfaßte Menge ist in der Summe für die Batch-Splitt-Pos. zu groß |
169 | D | Die erfaßte Menge ist in der Summe für die Batch-Splitt-Pos. zu groß |
170 | D | Die erfaßte Menge ist in der Summe für die Batch-Splitt-Pos. zu klein |
171 | D | Menge ist kleiner als die Menge, die mit Auslieferungen assoziiert ist |
172 | D | Die Assoziationsmenge kann nicht vergroessert werden, da offene Menge = 0 |
173 | D | Geschäftsprozeß-Schritte &1 und &2 sind nicht assoziierbar |
174 | D | Keine Daten zum Assoziieren gefunden |
175 | D | Assoziationsauszeichnung ist für komprimierte Positionen nicht möglich |
176 | D | Inkonsistente Mengeninformationen! Überprüfen Sie die Batch-Splitt-Pos. |
177 | D | Charge kann nicht geändert werden, es existiert Assoziation mit Charge &1 |
178 | D | Die Geschäftsprozeß-Schritte &1 und &2 sind nicht assoziierbar |
179 | D | Position &1 des Beleges &2 ist nicht für Assoziationen relevant |
180 | D | Änderung der Warengruppe ist nicht möglich. |
181 | D | Die Warengruppe soll geändert werden, obwohl bereits Assoziationen exist. |
182 | D | Löschen der Trading-Kontrakt-Position nicht möglich, da Assoz. existieren |
183 | D | Mit dem Löschen der Position werden auch Assoziationen gelöscht |
184 | D | Keine Assoziationspartner gefunden |
185 | D | Der Assoziationspartner &3, &4 muss komplett assoziiert sein |
186 | D | Keine Daten zum Assoziieren für den Assoziationspartner gefunden |
187 | D | Die Assoziationsdaten konnten nicht eindeutig ermittelt werden |
188 | D | Assoziationsmenge wurde weitertransferiert, Löschen nicht mehr möglich |
189 | D | Charge nicht änderbar: Pos. ist mit unterschiedlichen Chargen assoziiert |
190 | D | BewArt nicht änderbar: Pos. ist mit unterschiedlichen Chargen assoziiert |
191 | D | Die erfasste Menge ist für das Trennen der Vorgängerassoziationen zu groß |
192 | D | Assoziationstrennung ist für komprimierte Positionen nicht möglich |
193 | D | bitte markieren Sie nur eine einzelne Position |
194 | D | Assoziationskandidat &1 &2, Position &3, kann nicht gesperrt werden |
195 | D | Operation nicht ausführbar, da Assoziationspartner nicht gesperrt |
196 | D | Der Trading-Kontrakt &1 ist zur Zeit durch den Anwender &2 gesperrt |
197 | D | Assoziationsauszeichnung ist nicht eindeutig |
198 | D | Der Trading-Kontrakt &1 ist kein Prä-Kontrakt |
199 | D | Eingabeparameter &1 ist initial |
200 | D | Keine Kumulierungsdaten zu Position &1 des Trading-Kontrakts &2 gefunden |
201 | D | Vorgaengerassoziationen können nicht getrennt werden |
202 | D | Assoziation nicht änderbar wegen Mengenabweichung |
203 | D | Die für die Position erfasste Menge ist zu gross. |
204 | D | Einkaufsseitige Mengenabweichung ist nicht moeglich |
205 | D | Aenderung der Menge nicht moeglich, da Mengenabweichungen existieren |
206 | D | Keine Informationen zu den Assoziationspos. auf Schrittebene gefunden |
207 | D | Netzwerkdaten der aktuellen Position &1 &2 ist u.U. nicht aktuell |
208 | D | Position &1, &2 muss vollständig assoziiert sein. Offene Menge = &3 &4 |
250 | D | Prozess-Schritt &1 ist nicht relevant für das Assoziations-Management |
251 | D | Die aktive Assoziation wird nicht mehr berücksichtigt: keine Sperre mögl. |
252 | D | Verringerung auf negative aktive Assoziationen ist nicht möglich |
253 | D | Es existiert keine Vater-Assoziation und keine aktuelle Assoziation |
254 | D | Es sind keine Assoziationen zur vorgegebenen Charge &1 vorhanden |
255 | D | Es sind keine Assoziationen zum vorgegebenen Lagerort &1 vorhanden |
256 | D | Es sind keine Assoziationen zum Lagerort &1 und Charge &2 vorhanden |
257 | D | Die Geschäftsprozess-Schritte &1 und &2 sind nicht assoziierbar |
258 | D | Die Menge ist kleiner als die Menge der nachfolgenden Positionen |
259 | D | Prozess-Schritt &1 und &2 nicht assoziierbar, Assoziationsmenge > 0 |
260 | D | Führende Position &1 ist um &2 &3 überassoziiert |
261 | D | Vaterposition &1 der führenden Position &2 ist um &3 &4 überassoziiert |
262 | D | Die Menge kann nicht durch einen Wareneingang abgedeckt werden |
263 | D | Vaterassoz. nicht transferierbar, Vorgängerpos. hat keine offene Menge |
264 | D | Pos &1: keine Assoz. transferierbar, Menge größer als offene Menge(&2 &3) |
265 | D | BADI n2m_quantity_distrib: falscher Param. &1 für p_full_associated |
266 | D | Beleg &1: Fehler bei der Folgebelegerzeugung aufgetreten |
267 | D | Keine Daten in Tabelle WBIT zu Pos. &1 des Trading-Kontrakts &2 gefunden |
268 | D | Prä-TC: Die neue Mng ist kl. als die weitergereichte assoz. Mng: &1 &2 |
269 | D | Zum Referenzbeleg &1 &2 wurden folgende Positionen geprüft: |
270 | D | Zum Ref.-Beleg &1 &2, assoziiert mit &3 &4, wurden folgende Pos. geprüft: |
271 | D | Trading-Kontrakt &1, Position &2, Menge &3 &4 |
272 | D | Die Gesamtmng. der Pos. (&1 &2) ist größer als die verfügbare Mng (&3 &4) |
273 | D | Menge (&1 &2) ist größer als verfügbare Menge der Referenz-Pos. (&3 &4) |
274 | D | Position &1, Einkaufsmenge: &2 &4, Verkaufsmenge: &3 &4 |
275 | D | Eink-Mng. der gepr. Pos. (&1 &3) ist größer als verfügbare Mng (&2 &3) |
276 | D | Verk-Mng. der gepr. Pos. (&1 &3) ist größer als verfügbare Mng (&2 &3) |
277 | D | Partner Trading-Kontrakt &1 wurde geändert. Freigabe erforderlich. |
278 | D | automat. Assoz.anpassung nicht möglich. Zuerst Tr.-Kontrakt &1 freigeben |
279 | D | Es ist ein interner Fehler aufgetreten |
280 | D | Es ist ein interner Fehler aufgetreten |
281 | D | Der Eingabewert &1 &3 widerspricht den Rundungsregeln. Vorschlag = &2 &3 |
282 | D | Basis-Mengeneinheiten unterschiedlich: Mat. &1: &2, Mat. &3: &4 |
283 | D | Bestell-Mengeneinheiten unterschiedlich: Mat. &1: &2, Mat. &3: &4 |
284 | D | Material &1 hat andere Umrechnungsfaktoren als Material &2. |
285 | D | Verkaufs-Mengeneinheiten unterschiedlich: Mat. &1: &2, Mat. &3: &4 |
286 | D | Pos. anlegen mit Assoz-Bezug nicht möglich. Zuerst Tr.-Kontr. &1 freig. |
287 | D | Überassoziierung auf Grund der Verteilung: manuelle Anpassungen notwendig |
288 | D | Die Charge &1 ist nicht erlaubt |
289 | D | Assoz-Mngt wurde noch nicht prozessiert. Kein Protokoll vorhanden |
001 | E | No association type was transferred (internal error) |
002 | E | No data exists for association type &1 |
003 | E | The text for association type &1 does not exist in language &2 |
004 | E | No association group was transferred (internal error) |
005 | E | No data exists for association group &1 |
006 | E | The text for association group &1 does not exist in language &2 |
007 | E | No association data was selected |
008 | E | No aggregated data was found |
009 | E | No document category was transferred (internal error) |
010 | E | Document category &1 is not known |
011 | E | No name for the control container was transferred (internal error) |
012 | E | Internal error occurred |
013 | E | Select one line item |
014 | E | Internal error occurred |
015 | E | Select an item line |
016 | E | No coding implemented for the selected document category |
017 | E | Item category &1 is not assigned to trading contract type &2 |
018 | E | Associations exist for document item. Deletion not possible |
019 | E | Changes to the portfolio are not possible |
020 | E | Internal error during determination of association type |
021 | E | Internal error during updating of association data |
022 | E | Internal error during reading of item data |
023 | E | Internal error during determination of association group |
024 | E | No leading unit of measure maintained in association group &1 |
025 | E | Display quantity unit cannot be determined (user contract) |
026 | E | Display unit of measure cannot be determined (purchasing-side contract) |
027 | E | Changes to unit of measure no longer possible |
028 | E | Changing the quantity is not allowed |
029 | E | Internal error during reading of an internal table |
030 | E | Deletion of item is not allowed |
031 | E | No association data was created for item &1 |
032 | E | No reassociation strategy maintained |
033 | E | No association group exists for item &1 |
034 | E | Internal error during updating of aggregated data |
035 | E | No association data exists for document &1 |
036 | E | Internal error during updating of association data |
037 | E | Error occured during the association handling. See error log |
038 | E | No lock reason was transferred |
039 | E | No data exists for lock group &1 |
040 | E | Text for lock group &1 does not exist in language &2 |
041 | E | No document category transferred |
042 | E | No data exists for document category &1 |
043 | E | Text for document category &1 does not exist in language &2 |
044 | E | No TEW type transferred (internal error) |
045 | E | Changes to association group are not allowed |
046 | E | Maintain an association group for item &1 |
047 | E | Maintain a reassociation type |
048 | E | Document &1 is not blocked as processing is not supported |
049 | E | No association data can be read for document &1 |
050 | E | No aggregated data exists |
051 | E | Open quantity no longer exists |
052 | E | No items for association found |
053 | E | No TEW type was transferred |
054 | E | No business process step was transferred |
055 | E | No business process steps for association exist |
056 | E | No cumulating data found (internal error) |
057 | E | No one-sided item exists |
058 | E | Base document cannot be determined |
059 | E | No quantity information found (internal error) |
060 | E | No information on follow-on documents found (internal error) |
061 | E | No information found on TEW type and process step (internal error) |
062 | E | No data was transferred (internal error) |
063 | E | Processing of document &1 is not supported |
064 | E | Business process step cannot be determined |
065 | E | No open quantity item is found |
066 | E | No information found on base document (internal error) |
067 | E | The new association quantity of 0 is not permitted |
068 | E | The quantity of the item to receive the association is insufficient |
069 | E | The quantity of the associated item is insufficient |
070 | E | The open quantity in the aggregated data is not sufficient |
071 | E | No associated items found |
072 | E | No associations possible for position &1 (no material number exists) |
073 | E | No associations possible for position &1 (no portfolio exists) |
074 | E | No association for position &1 possible (No Cumullative data) |
075 | E | Association does not exist yet for item &1. Creation is possible |
076 | E | Document &2, item &3 already associated |
077 | E | Association can not be transferred to subsequent items |
078 | E | Association can not be transferred to subsequent items |
079 | E | Creation of an item with reference to associations is not possible |
080 | E | Creation of an item with reference to associations is not possible |
081 | E | Creation of an item with reference to associations is not possible |
082 | E | Creation of an item with reference to associations is not possible |
083 | E | Creation of an item with reference to associations is not possible |
084 | E | Creation of an item with reference to associations is not possible |
085 | E | Document &1 is blocked. Creation of an item with reference not possible |
086 | E | The open quantity of the referece item is zero |
087 | E | No items selected for association |
088 | E | No quantity selected for association |
089 | E | Internal error during creation of item with reference to associations |
090 | E | The quantity entered is too high |
091 | E | Creation of an item with reference to associations is not possible |
092 | E | Automatic reassociation is not possible as documents are blocked |
093 | E | Document &1 is locked. Associations cannot be processed |
094 | E | The entered quantity is too small |
095 | E | The entered quantity is too large |
096 | E | Preceding association cannot be uniquely determined |
097 | E | Preceding association cannot be adopted |
098 | E | Preceding association cannot be transferred to follow-on item |
099 | E | An overflow occurred during the calculation of quantities |
100 | E | Reassociation strategy &1 is not supported |
101 | E | No stock link exists for doc. &1 item &2 |
102 | E | The quantity entered for batch number &1 is too high |
103 | E | Associated quantity for batch number &1 is greater than entered quantity |
104 | E | The entered quantity is too small |
105 | E | No data available for cross-reference |
106 | E | Select only one entry per document category |
107 | E | No association data for cross-reference found |
108 | E | Maintain the reservation mode |
109 | E | Trading contract &1: No association management possible |
110 | E | Trading contract &1: No association management possible |
111 | E | Trading contract &1: No association management possible |
112 | E | Trading contract &1: No association management possible |
113 | E | No associations can be created for item &1 |
114 | E | A 1:n relationship exists |
115 | E | No associations are permitted for item &1 |
116 | E | No associations possible for item &1 (no portfolio) |
117 | E | Internal error in function module &1: No association partner found |
118 | E | Contract &1 not approved. Item &2 is not an association candidate |
119 | E | Contract &1 approved. Items available as association candidates |
120 | E | Approval of contract &1 reset |
121 | E | Assoc. between process steps &1 and &2 must not be changed |
122 | E | Association between process steps &1 and &2 must not be deleted |
123 | E | Make association once only for same item |
124 | E | Redistribution strategy irrelevant as automatic reassociation not active |
125 | E | Two-sided trading contract: manual changing of associations not possible |
126 | E | The item is not fully associated |
127 | E | The item is closed. You cannot delete the association |
128 | E | The item is closed. You cannot change the association |
129 | E | Cross-reference data has been saved |
130 | E | Cross-reference data has been adopted |
131 | E | Associations were saved with temporary status |
132 | E | Reassociations were saved |
133 | E | Associations were saved |
134 | E | Reduction of association quantity by &1 &2 not possible |
135 | E | Quantity too large. Automatic adjustment of associations not possible |
136 | E | Quantity is smaller than quantity associated with outbound deliveries |
137 | E | The new quantity is smaller than the associated quantity |
138 | E | Aggregated data missing. Automatic adjustment of association not possible |
139 | E | Error during automatic adjustment of associations. See log |
140 | E | The quantity entered is too high |
141 | E | The quantity entered for batch number &1 is too high |
142 | E | No data found in internal table (internal error) |
143 | E | Error in association processing |
144 | E | Internal error occurred |
145 | E | Associations with temporary status and assoc. cross-reference saved |
146 | E | Select a line |
147 | E | Item is not associated. Cross-reference not possible |
148 | E | Quantity for association cross-reference is zero |
149 | E | No cross-reference made for document &1 |
150 | E | No association created for document &1 |
151 | E | Info: Purch. and sales-side items belong to different batches |
152 | E | Inconsistent reassociation: Quantity assigned is too high |
153 | E | Inconsistent reassociation: quantity not correctly reassociated |
154 | E | Unknown value &4 returned by method &1 |
155 | E | The quantity entered for storage location &1 is too high |
156 | E | Associated quantity for storage location &1 is higher than entered qty |
157 | E | The quantity entered for storage location &1 is too high |
158 | E | The quantity entered for storage location &1 and batch no. &2 is too high |
159 | E | Associated qty for stor.loc. &1 and batch no. &2 higher than entered qty |
160 | E | The quantity entered for storage location &1 and batch no. &2 is too high |
161 | E | Info: Purchasing and sales side items have different storage locations |
162 | E | You cannot delete the item as the association cannot be deleted |
163 | E | You cannot delete the item because a subsequent item already exists |
164 | E | No information found for the document item (internal error) |
165 | E | The association quantity cannot be changed |
166 | E | The association quantity cannot be changed |
167 | E | Internal error occurred |
168 | E | Total created quantity is too large for the batch split items |
169 | E | Total created quantity is too large for the batch split items |
170 | E | Total created quantity is too small for the batch split items |
171 | E | Quantity is smaller than quantity associated with outbound deliveries |
172 | E | Association quantity cannot be increased as the open quantity - 0 |
173 | E | Business process steps &1 and &2 cannot be associated |
174 | E | No data found for associating |
175 | E | Cross-references are not possible for compressed items |
176 | E | Inconsistent quantity information - check the batch split items |
177 | E | Batch cannot be changed: an association exists with batch &1 |
178 | E | Business process steps &1 and &2 cannot be associated |
179 | E | Item &1 in document &2 is not suitable for associations |
180 | E | It is not possible to change the merchandise category |
181 | E | The merchandise category should be changed despite associations existing |
182 | E | Deletion of the Trading-Contract Position is not possible, bec.Asso.exist |
183 | E | Associations are deleted when the item is deleted |
184 | E | No associationpartner has been found. |
185 | E | Association partner &3, &4 must be completely associated |
186 | E | No association data is available for the association partner |
187 | E | The association data could not be determined clearly |
188 | E | Association quantity has been transferred, deletion is not possible |
189 | E | Batch cannot be changed: Item is associated with different batches |
190 | E | Movmnt type cannot be changed: Item is associated with different batches |
191 | E | The quantity entered is too large to split the preceding associations |
192 | E | Association splitting cannot be run for compressed items |
193 | E | Select a single item only |
194 | E | Association candidate &1 &2, item &3 cannot be blocked |
195 | E | Operation cannot be run as the association partner is not blocked |
196 | E | Trading contract &1 is currently blocked by user &2 |
197 | E | Association description is not clear |
198 | E | Trading contract &1 is a preliminary contrac |
199 | E | Input paramter &1 is empty |
200 | E | No cumulation data found for position &1 in trading contract &2 |
201 | E | Preceding associations could not be separated |
202 | E | Association cannot be changed due to differing quantities |
203 | E | Quantity entered for the item is too large |
204 | E | It is not possible to have a quantity deviation on the purchasing side |
205 | E | Quantity cannot be changed due to quantity variances |
206 | E | No information exists for association item at step level |
207 | E | Network data for the current item &1 &2 may not be up-to-date |
208 | E | Item &1, &2 must be completely associated. Open quantity - &3 &4 |
250 | E | Process step &1 is not relevant for Association Management |
251 | E | Active association no longer included: Not possible to lock |
252 | E | Not possible to reduce to negative, active associations |
253 | E | No parent association and no current association exists |
254 | E | No associations exist for specified batch &1 |
255 | E | No associations exist for specified storage location &1 |
256 | E | No associations exist for storage location &1 and batch &2 |
257 | E | Business steps &1 and &2 cannot be associated |
258 | E | Quantity is less than the quantity of the subsequent items |
259 | E | Process step &1 and &2 cannot be associated, association quantity > 0 |
260 | E | Leading item &1 is overassociated by &2 &3 |
261 | E | Parent item &1 from leading item &2 is overassociated by &3 &4 |
262 | E | Quantity cannot be covered by one goods receipt |
263 | E | Parent assoc. non-transferable, preceding item has no open quantity |
264 | E | Item &1: no assoc. transferable, quantity larger than open qty (&2 &3) |
265 | E | BAdI n2m_quantity_distrib: incorrect param. &1 for p_full_associated |
266 | E | Document &1: Error occurred during follow-up document creation |
267 | E | No data found in table WBIT for item &1 of trading contract &2 |
268 | E | Precontract: New qty is less than the transferred associated qty: &1 &2 |
269 | E | Following items were checked for reference document &1 &2: |
270 | E | Following items checked for ref. document &1 &2, associated with &3 &4: |
271 | E | Trading contract &1, item &2, quantity &3 &4 |
272 | E | Total quantity of item (&1 &2) is greater than available quantity (&3 &4) |
273 | E | Quantity (&1 &2) is greater than available quantity of ref. item (&3 &4) |
274 | E | Item &1, purchasing quantity: &2 &4, sales quantity: &3 &4 |
275 | E | Purch. qty of checked item (&1 &3) is greater than available qty (&2 &3) |
276 | E | Sales qty of checked item (&1 &3) is greater than available qty (&2 &3) |
277 | E | Partner trading contract &1 was changed, release necessary |
278 | E | Automat. association not possible, first release trading contract &1 |
279 | E | Internal error occurred |
280 | E | Internal error occurred |
281 | E | Input value &1 &3 contradicts rounding rules. Proposal - &2 &3 |
282 | E | Different base units of measure: Material &1: &2, Material &3: &4 |
283 | E | Different purchase order units: Material &1: &2, Material &3: &4 |
284 | E | Material &1 has different conversion factors to material &2 |
285 | E | Different sales : Material &1: &2, material &3: &4 |
286 | E | Not possible to create item with assoc. reference. First TC &1 released |
287 | E | Overassociation due to distribution: manual adjustments required |
288 | E | Batch &1 is not permitted |
289 | E | Association management was not processed yet. No log available |