This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.
Check it out on amazon.com →The Message Class J2 (IS_B: Nachrichtenklasse für die Entwicklungsklasse JBT) is a standard Message Class in SAP ERP and is part of the package JBT.
Message Class | J2 |
Short Text | IS_B: Nachrichtenklasse für die Entwicklungsklasse JBT |
Package | JBT |
ID | Language | Text |
---|---|---|
000 | D | Überprüfen Sie die Einstellungen |
001 | D | Geben Sie einen gültigen Wert ein |
002 | D | Geben Sie mind. den Gewichtungsfaktor in '%' und die OZ Laufzeit an |
003 | D | Summe der Gewichtungen ist &%, bitte korrigieren |
004 | D | Überprüfen Sie die Einstellung für '&' |
005 | D | Zu Kalkulationsregel ist kein Rechenschema zugeordnet |
006 | D | Pflegen Sie die OZ-Gewichtung |
007 | D | Kalkulationsregel wurde gesichert |
008 | D | Fehler beim Sichern der Kalkulationsregel |
009 | D | Die Kalkulationsregel '&' existiert bereits |
010 | D | Kalkulationsregel '&' existiert noch nicht |
011 | D | Fehler beim Lesen der Tabelle '&' |
012 | D | Kalkulationsregel ist konsistent |
013 | D | Fehler beim Löschen der Kalkulationsregel '&' |
014 | D | Kalkulationsregel '&' wurde gelöscht |
015 | D | Kalkulationsregel '&1' wurde nach '&2' kopiert |
016 | D | Wählen Sie eine Kalkulationsregel aus |
017 | D | Kalkulationsregel '&' wird transportiert |
018 | D | Kalkulationsregel '&' ist inkonsistent |
019 | D | &4 Die kalk. Periode &1 liegt außerhalb der Geschäftslaufzeit &2 |
020 | D | Fehler bei Bestimmung der Verfahren |
021 | D | KalkRegel ist einem Bankprodukt zugeordnet, Löschen nicht erlaubt |
022 | D | &4 Unzulässige Konditionsposition (für Zinsanpassung) übergeben (Nr. '&') |
023 | D | &4 Bestimmung der Termine für die Zinsfeststellung nicht möglich (Nr.'&') |
024 | D | &4 Fehler bei der Berechnung einer Forward-Rate zum '&' (Nr. '&') |
025 | D | &4 Fehler beim Ermitteln des Referenzzinssatzes zum '&' (Nr. '&') |
026 | D | &4 Erzeugung des Zahlungsstroms nicht möglich (Nr. '&') |
027 | D | Abbruch der Transaktion |
028 | D | KontoNr(int/ext) '&/&' Buchungskreis '&' Geschäftsdiff. '&' |
029 | D | Finanzobjektnummer '&' Geschäftsdiff. '&' |
030 | D | Achtung, Kalkulationsschema für Mindesreservesätze pflegen! (-> Langtext) |
031 | D | Achtung, ohne Einschränkungen werden alle Kalkulationsregeln selektiert |
032 | D | Achtung, ohne Einschränkungen werden alle Produkte selektiert |
033 | D | Geben Sie einen Bezeichner für die Kalkulationsregel ein |
034 | D | VertragsNr(int/ext) '&/&' Buchungskreis '&' |
035 | D | OrderNr(int/ext) '&/&' Buchungskreis '&' |
036 | D | Dienstleistungsnummer '&' Buchungskreis '&' |
037 | D | Finanzgeschäftsnummer '&' Buchungskreis '&' |
038 | D | Unverzinslicher Bestand '&' |
039 | D | Wertpapier/Devisen Bestand '&' |
040 | D | Die Kalkulationsregel '&' wird von Benutzer '&' bearbeitet |
041 | D | &4 Fataler Fehler bei der Cashflow-Erzeugung von Darlehen. |
042 | D | &4 Fataler Fehler bei der Cashflow-Erzeugung von Darlehen. |
043 | D | Alle Bankprodukte sind bereits zugeordnet |
044 | D | &4 Geschäftsjahr und Periode konnten nicht ermittelt werden |
045 | D | &4 Ergebnisbereich nicht gültig für das Geschäft |
046 | D | Es wurden keine Geschäfte selektiert |
047 | D | &4 Für das Geschäft wurde keine Kalkulationsregel gefunden |
048 | D | &4 Für das Geschäft wurde keine Anlageform gefunden |
049 | D | Beim Sichern der Kalkulationsdaten ist ein Fehler aufgetreten |
050 | D | &4 Geschäft '&' kann nicht kalkuliert werden |
051 | D | Periodenbeginn oder Periodenende konnten nicht gefunden werden |
052 | D | &4 Das Geschäft ist für die aktuelle Periode bereits abgeschlossen |
053 | D | &4 Das Geschäft ist für die vorige Periode noch nicht kalkuliert |
054 | D | Periodenende ist ungl. dem KalkDatum, Periode kann nicht abgschl. werden |
055 | D | &4 Für das Konto & & & werden Umsätze und Tagessalden übergeben |
056 | D | &4 Keine Rückvalutierung für Regel & |
057 | D | &4 Das Geschäft ist für die akt. Periode noch nicht kalkuliert |
058 | D | Zuordnungstabelle ist von Benutzer & gesperrt (siehe Anzeige) |
059 | D | Fehler beim Sichern der Bankproduktzuordnung |
060 | D | Die Bankproduktzuordnung wurde gesichert |
061 | D | &4 Der Zahlungsstrom existiert bereits |
062 | D | &4 Der Zahlungsstrom existiert nicht |
063 | D | &4 Kopieren der Merkmale für Referenzgeschäft '&' gescheitert |
064 | D | &4 Das Objekt ist bereits gesperrt |
065 | D | Geben Sie ein 'Gültig ab' Datum ein |
066 | D | Geben Sie ein gültiges Bankprodukt ein |
067 | D | Geben Sie eine (gültige) Kalkulationsregel an |
068 | D | Es wurden doppelte Schlüssel eingegeben |
069 | D | Korrigieren Sie zuerst Ihre Eingaben |
070 | D | Geben Sie eine (passende) Produktart ein |
071 | D | &4 Das Geschäft '&' ist gelöscht bzw. storniert, -> keine Kalkulation |
072 | D | Test: Rollname = '&' |
073 | D | Aktiv/Passiv-Kennzeichen der Kalkulationsregeln ist nicht einheitlich |
074 | D | Produktart paßt nicht zu allen Kalkulationsregeln |
075 | D | Referenzprodukt und Variante sind noch nicht in der Zuordnung enthalten |
076 | D | Aktiv/Passiv-Kennzeichen mindestens einer Referenzregel ist ungültig |
077 | D | Nicht alle Referenzregeln erlauben Referenzprodukte |
078 | D | &4Für die Vorgangsart '&' kann nur die Einzelpostenliste angezeigt werden |
079 | D | &4 Für das Land & wurden keine Mindestreservestichtage festgelegt |
080 | D | &4 Für die Anlageform '&1' können noch keine Bestände geführt werden |
081 | D | &4 Für Geschäft & wurden mehrere Leistungsstörungszahlungsstr. gefunden |
082 | D | &4 Geschäft &/& ist für &/& noch nicht abgeschlossen |
083 | D | &4 Währungsumrechnung (&) für & gescheitert |
084 | D | &4 Für Geschäft & wurde kein Zahlungsstrom übergeben. |
085 | D | &4 Die Bewegungsart ist für die Vertragsart des Geschäfts nicht erlaubt |
086 | D | &4 Die Daten wurden gesichert |
087 | D | &4 Ergebnisbereich konnte nicht ermittelt werden |
088 | D | &4 Die Periode konnte zum Datum & Geschäft & nicht ermittelt werden |
089 | D | &4 Zahlungsstrom wurde gelöscht |
090 | D | &4 Es existiert kein Zahlungsstrom |
091 | D | &4 Geschäft ist gelöscht bzw. storniert |
092 | D | &4 Der Bestand ist gesperrt von Benutzer & |
093 | D | &4 Die Produktart ist nicht vorhanden |
094 | D | &4 Zum Bestand & existieren keine Kalkulationsdaten |
095 | D | &4 Zum Bestand & fehlt der Anlagestamm |
096 | D | &4 Zum Geschäft konnte keine Vertragsart ermittelt werden |
097 | D | &4 Das Geschäft existiert nicht |
098 | D | Mussfeld ist nicht gefüllt, überprüfen Sie Ihre Eingaben |
099 | D | Eines der Felder darf nicht gefüllt sein, überprüfen Sie Ihre Eingaben |
100 | D | &4 Der gewünschte Datenbankzugriffsmodus & ist nicht möglich. |
101 | D | &4 Die Konditionsart ist nicht vorhanden. |
102 | D | &4 Die Produktart &1 ist für Darlehen &2 &3 nicht vorhanden. |
103 | D | &4 Die Kondtionsart oder Konditionsgruppe ist falsch |
104 | D | &4 Der Text zur Konditionsart ist nicht gepflegt |
105 | D | &4 Der Konditionskopf ist nicht plausibel |
106 | D | &4 Die Konditionsposition ist nicht plausibel |
107 | D | Interne Objektnummer kann nicht vergeben werden |
108 | D | &4 Die Produktart ist falsch |
109 | D | &4 Die Zinsberechnungsmethode & ist falsch. |
110 | D | &4 Das Inklusivkennzeichen für den Berechnungstag ist falsch |
111 | D | &4 Das Inklusivkennzeichen für den Fälligkeitstag ist falsch |
112 | D | &4 Verschiebung des Berechnungstags auf Werktag hat falschen Schlüssel |
113 | D | &4 Verschiebung des Fälligkeitstags auf Werktag hat falschen Schlüssel |
114 | D | &4 Verschiebung des Dispodatums auf Werktag hat falschen Schlüssel |
115 | D | &4Ermittlungsmethode des nächsten Berechnungstages hat falschen Schlüssel |
116 | D | &4Ermittlungsmethode des nächsten Fälligkeitstages hat falschen Schlüssel |
117 | D | &4 Der Schlüssel für zeitanteilige Berechnung ist falsch |
118 | D | &4 Der Schlüssel für Fälligkeit-Heranziehen ist falsch |
119 | D | &4 Es wurden keine Bankproduke selektiert. |
120 | D | Geben Sie für die Stichtagskalkulation den Kalkulationsstichtag ein |
121 | D | &4 Zahlungsstrom für Periodisierung nicht vorhanden. |
122 | D | &4 Das Finanzobjekt (&1) ist gesperrt und kann nicht kalkuliert werden |
123 | D | &4 Fehler bei der Ermittlung des Preises einer Umbuchung |
124 | D | &4 Der Wert & ist für das Feld & ungültig (Festwert-Prüfung). |
125 | D | &4 Letzte Seite der Liste |
126 | D | &4 Der Wert & ist für das Feld & ungültig (Wertetabelle-Prüfung). |
127 | D | &4 Festwerte zum Feld & nicht vorhanden. |
128 | D | &4 Kalkulationsschema & nicht bekannt. |
129 | D | &4 Ergebnisbereich & nicht bekannt. |
130 | D | Feld & ist ein Mussfeld, geben Sie einen Wert ein |
131 | D | Feld & darf nicht gefüllt sein, löschen Sie Ihre Eingaben |
132 | D | &4 Zur Wertpapierkennummer & existiert kein Anlagestamm. |
133 | D | &4 Der Index des fehlerhaften Satzes ist &. |
134 | D | &4 Bitte gültige Funktion wählen. |
135 | D | &4 Dieser Stufe ist keine Zugriffsfolge zugeordnet. |
136 | D | &4 Das Kalkulationsschema muß aus Verwendung & und Applikation & sein. |
137 | D | &4 Bitte geben Sie ein zulässiges Kalkulationsschema ein. |
138 | D | &4 Laufzeitbeginn ist größer oder gleich Laufzeitende |
139 | D | &4 Die Tilgungsart ist nicht vorhanden |
140 | D | &4 Bestandskennzeichen & & & nicht vorhanden. |
141 | D | &4 Felder RANLALT1 UND RANL sind leer. |
142 | D | &4 Fehler bei der Nummernvergabe für Referenzgeschäfte |
143 | D | &4 Der Zahlungsstromtyp & ist nur bei der Datenübernahme zulässig |
144 | D | &4 Zum Geschäft existiert bereits ein Zahlungsstrom vom Typ & |
145 | D | &4 Zahlungsstrom ist bereits gesperrt von Benutzer & |
146 | D | &4 Der Ergebnisbereich & ist kein Bank-Ergebnisbereich |
147 | D | &4 Keine 1:1 - Zuordnung mit externer Nummer & möglich. |
148 | D | &4 Inkonsistente Daten: ExtNr &, IntNr(Daten) &, IntNr(aus ext) &. |
149 | D | &4 Ermittelte interne Nummern: &. |
150 | D | & & & & |
151 | D | &4 Valut. Kapital & größer als Zusagekapital &. |
152 | D | &4 Bewegungsart für Auszahlung (Konditionsgruppe &) nicht gefunden. |
153 | D | &4 Konditionen (Köpfe) zum Darlehen & nicht gefunden. |
154 | D | &4 Konditionen (Positionen) zum Darlehen & nicht gefunden. |
155 | D | &4 Simulierte Vollvalutierung nach Ende der Geschäftslaufzeit. |
156 | D | &4 Zur Produktart & konnte keine Konditionsgruppe gefunden werden. |
157 | D | &4 Zahlungsstrom zum Darlehen & konnte nicht erzeugt werden |
158 | D | &4 Bewegungsart mit Bewegungstyp & nicht gefunden |
159 | D | &4 Gültigkeitsdatum des Zahlungsstromes muß vor erster Bewegung liegen. |
160 | D | &4 Per. Effektivkapital nicht berechnet. |
161 | D | &4 Abzinsungsfaktor für & & & nicht gefunden. |
162 | D | &4 Barwert des durchschn. Effektivkapitals nicht berechnet |
163 | D | &4 Zinsbeitrag nicht berechnet. |
164 | D | &4 Opportunitätsbeitrag nicht berechnet |
165 | D | &4 Bewegungen ohne Bewegungsart vorhanden. |
166 | D | &4 Effektivzins kleiner als -99 % oder größer als 99999 %. |
167 | D | &4 Effektivzins nicht berechnet |
168 | D | &4 Effektivzins der Opportunität nicht berechnet. |
169 | D | &4 Restmarge nicht berechnet. |
170 | D | &4 Währungstransformationsbeitrag nicht berechnet. |
171 | D | &4 Mindestreservekosten (Barwert) nicht berechnet. |
172 | D | &4 Fehler bei Periodisierung der MR-Kosten. |
173 | D | &4 Mehr als ein Abrechnungszahlungsstrom gefunden |
174 | D | &4 Interner Fehler bei Prolongation. |
175 | D | &4 Leistungsstörung: Daten fehlen (intern). |
176 | D | &4 Keine Zusage/Abrechnung vorhanden |
177 | D | &4 Positionen zur Abrechnung nicht vorhanden (intern). |
178 | D | &4 Keine Endabrechnung vorhanden. |
179 | D | &4 Finanzgeschäft & ist nicht im Zustand Vertrag bzw. Vertragsabrechnung |
180 | D | &4 Kalender aus Zinsreferenz & nicht gefunden |
181 | D | &4 Kalender aus Zinsreferenz & nicht mehr gültig |
182 | D | &4 Zinsreferenz & nicht gepflegt |
183 | D | &4 Zinskurve aus Zinsreferenz & nicht gepflegt |
184 | D | &4 Zinskurve aus Zinsreferenz & nicht gefunden |
185 | D | &4 Zinskurve & & & nicht gefunden |
186 | D | &4 Geldkurve oder Briefkurve nicht gepflegt |
187 | D | &4 Umrechnungskurstyp nicht gepflegt |
188 | D | &4 Umrechnung von & nach & am & mit Kurstyp & nicht möglich |
189 | D | &4 Interner Fehler: Bestandswert konnte nicht gefunden werden |
190 | D | Kurs (Knr. & zum & Hand.pl. & Kursart &) fehlt |
191 | D | &4 Zahlungsstrom zum & konnte nicht aufgebaut werden |
192 | D | &4 Effektivzinsen von & bis & konnten nicht berechnet werden |
193 | D | &4 Opportunitätszinssatz nicht gefunden |
194 | D | &4 Bitte geben Sie eine gültige Bankproduktvariante ein |
195 | D | &4 Bitte geben Sie ein Zuordnungsdatum ein |
196 | D | &4 Vergangenheitsgewichtung ist nicht einheitlich für die FristStruktur |
197 | D | &4 Datum außerhalb des Gültigkeitsbereiches |
198 | D | &4 Zinssatz in Zinstabelle nicht gefunden (Kurve: & &) |
199 | D | &4 Interner Fehler: Abgelaufene Tage der Berichtsperiode = 0 |
200 | D | &4 Keine Nominalzinskonditionen gefunden |
201 | D | &4 Kein Konditionskopf vorhanden |
202 | D | &4 Keine Konditionen OZ Geschäftswährung vorhanden |
203 | D | &4 Keine Konditionen OZ Hauswährung vorhanden |
204 | D | &4 Interner Fehler: Jahrestage = 0 |
205 | D | &4 Keine Konditionen Liniengeschäft vorhanden |
206 | D | &4 Tagessalden fehlen |
207 | D | &4 Nominalzins konnte nicht gefunden werden |
208 | D | &4 Keine Konditionen 'feste Marge' vorhanden |
209 | D | &4 Keine Konditionen 'nicht in Anspruch genommene Linie' vorhanden |
210 | D | &4 Interner Fehler: Periodisierung nicht möglich. |
211 | D | &4 Interne Tabelle konnte nicht modifiziert werden. |
212 | D | &4 Fehlerhafter Zahlungsstrom: |
213 | D | &4 Gültig ab & , Zahlungsstrom & , Typ &. |
214 | D | &4 Positionen (Effektivkapital) zum Zahlungsstrom &1 nicht gefunden |
215 | D | &4 Kein Zahlungsstrom zur Periodisierung vorhanden. |
216 | D | &4 Vorhandene Zahlungsströme: |
217 | D | &4Das Aktiv/Passivkennzeichen ist nicht einheitlich für die FristStruktur |
218 | D | &4 Keine Periodisierung mit Zusage/Abrechnung möglich. |
219 | D | &4 Gültigkeitsdatum (&) nach Periodenende. |
220 | D | &4 Keine Finanzgeschäfte zugeordnet. |
221 | D | &4 Keine Finanzgeschäfte gefunden. |
222 | D | &4 Finanzgeschäft & (BUKRS &) nicht gefunden. |
223 | D | &4 Keine Finanzgeschäftsbewegungen vorhanden. |
224 | D | &4 Zum Finanzgeschäft & (BUKRS &) sind keine Bewegungen vorhanden. |
225 | D | &4 Zum Finanzgeschäft & (BUKRS &) fehlt die Bewegungsart &. |
226 | D | &4 (-> Langtext) Zum Finanzgeschäft & (BUKRS &) ist die Bewegungsart & .. |
227 | D | &4 Keine Finanzgeschäftsvorgänge gefunden. |
228 | D | &4 Vorgang &1 zum Finanzgeschäft &2 (Bukrs &3) nicht vorhanden. |
229 | D | &4 Interner Fehler: Kein Bestandswert vor & gefunden. |
230 | D | &4 (-> Langtext) Zum Finanzgeschäft & (BUKRS &) sind keine Bewegungen ... |
231 | D | &4 Interner Fehler: Terminkurs konnte nicht berechnet werden |
232 | D | &4Unverz. Bestand hat keinen FI-Bezug o. Summentab. zum Ledger nicht gef. |
233 | D | &4 Int. Fehler: Durchschnittssaldo f. Bestand & konnte nicht ber. werden |
234 | D | &4 Periodenlänge kann nicht berechnet werden. |
235 | D | &4 Bestand nicht fortgeschrieben bis & |
236 | D | &4 (Bestand &, Buchungskreis &) Bestand kann nicht gesperrt werden |
237 | D | &4 Zu den Bestandskriterien existiert kein Bestand |
238 | D | &4 Die zugeordnete Kalkulationsregel erlaubt keine Bestandsfortschreibung |
239 | D | &4 (Bestand &, Bukrs &)Interner Fehler beim Sichern der Bestandswert |
240 | D | &4 Ordernummer ist nicht gefüllt. |
241 | D | &4 Externe Ordernummer nicht gefüllt. |
242 | D | &4 Bitte Pflegen Sie die Geschäftsdifferenzierung für das Ref.Produkt |
243 | D | &4 Das Darlehen existiert nicht |
244 | D | &4 Das Finanzgeschäft existiert nicht |
245 | D | &4 Es existiert kein Finanzobjekt zum Darlehen |
246 | D | &4 Es existiert kein Finanzobjekt zu dem Geschäft |
247 | D | &4 Interne Partnernummer ist falsch (-> Langtext). |
248 | D | &4 Externe Partnernummer ist falsch (-> Langtext). |
249 | D | &4 Leitwährung / Folgewährung ist für das Paar & / & nicht definiert |
250 | D | &4 Nominalzinskonditionen nicht lückenlos |
251 | D | &4 Kein Eintrag in TZUNI (Umrechnungsrelationen) zur Währung & |
252 | D | &4 Nummernkreisobj. & Nr.Kreis & für Ordernummer fehlt im Buchungskreis & |
253 | D | &4 Der erste Satz muß ein Kopf sein |
254 | D | &4 Zu einem Kopf muß genau eine Position übergeben werden |
255 | D | &4 Als Einzelsatz darf nur der Storno eine Kopfes gesendet werden |
256 | D | &4 Datensätze dürfen nur im Insert-/ oder Update-Modus übergeben werden |
257 | D | &4 Order (& & &) existiert bereits |
258 | D | &4 Order (& & &) existiert nicht oder wurde storniert |
259 | D | &4 Buchungskreis & existiert nicht |
260 | D | &4 Wertpapierkennummer & existiert nicht |
261 | D | &4 Buchungskreisbestand (& &) existiert nicht |
262 | D | &4 Depotbestand (& & &) existiert nicht |
263 | D | &4 Ergebnisbereich darf nicht mit '0M' beginnen |
264 | D | &4 Die benötigten Daten sind gesperrt |
265 | D | &4 Der Zahlungsstrom besitzt einen unzulässigen Typ |
266 | D | &4 Die Leistungsstörung zweiter Art ist unzulässig |
267 | D | &4 Zinssatz in GKM-Tabelle nicht gefunden (& & &) |
268 | D | &4 Der Prolongationszahlungsstrom (zum &) ist nicht vorhanden. |
269 | D | &4 IS-B: Leistungsstörung (ObjNr '&') kann nicht berechnet werden. |
270 | D | &4 Bitte geben Sie für die periodische Kalkulation die Startperiode ein |
271 | D | &4 Darlehen zur Leistungsstörung fehlt (& & &) |
272 | D | &4 Störungsbeseitigung liegt vor der Bewegung (& & &) |
273 | D | &4 Zu störender Zahlungsstrom existiert nicht (& & &) |
274 | D | &4 Zu störender Zahlungsstrom hat ungültigen Typ |
275 | D | &4 Zu störende Zahlung existiert nicht (& & &) |
276 | D | &4 Modus der Leistungsstörung wurde geändert |
277 | D | &4 Modus der Leistungsstörung ist unzulässig |
278 | D | &4 Bewegungsart nicht gefüllt (& & &) |
279 | D | &4 Datum der Bewegung nicht gefüllt (& & &) |
280 | D | &4 Datum der Störungsbeseitigung nicht gefüllt (& & &) |
281 | D | &4 Betrag der Störungsbeseitigung nicht gefüllt (& & &) |
282 | D | &4 Modus der Störungsbeseitigung nicht gefüllt (& & &) |
283 | D | &4 Dem Status & ist nicht die interne Ebene 'Orderabrechnung' zugeordnet |
284 | D | &4 Der Geschäftspartner & existiert nicht |
285 | D | &4 Zahlbank & existiert nicht |
286 | D | &4 Bewegungsart & ist ungültig |
287 | D | &4 Bewegungsart & entspicht weder Kauf noch Verkauf |
288 | D | &4 Fehler bei Umrechnung von & nach & mit Kurs & |
289 | D | &4 Das Geschäft hat keinen gültigen Status |
290 | D | &4 Fehler in der Sperrverwaltung |
291 | D | &4 Finanzobjekt bereits gesperrt von Benutzer & |
292 | D | &4 Interner Fehler: Objektnummer nicht gepflegt |
293 | D | &4 Stammdaten zum Darlehen & nicht gefunden. |
294 | D | &4 Transport nicht möglich |
295 | D | Dummy-Fehlermeldung für Zahlungsströme (& & & &) |
296 | D | &4 Die Tabelle & ist nicht vorhanden (Bitte Namen prüfen) |
297 | D | &4 Die Tabelle & ist schon vorhanden |
298 | D | &4 Die Tabelle & wurde erfolgreich eingefügt |
299 | D | &4 Die Tabellen wurden erfolgreich entfernt |
300 | D | &4 Die Länge eines Eintrages der Tabelle & ist zu lang. |
301 | D | &4 Die Tabellen sind vom Benutzer & gesperrt |
302 | D | &4 Ergebnisbereich darf nur in der Bankergebnisrechnung gepflegt werden. |
303 | D | &4 Ergebnisbereich darf nur in der Standardergebnisrechn. gepflegt werden |
304 | D | &4 Feld Zinsberechnungsmethode ist ein Mußfeld und wurde leer geliefert. |
305 | D | &4 Der Zahlungsstrom darf nicht gelöscht werden |
306 | D | &4 Zum Devisengeschäft (& &) wurde kein Gegenwert gepflegt |
307 | D | &4 Zum Geschäft existiert kein Bestand |
308 | D | &4 Zu dem Devisengeschäft fehlt ein Bestand |
309 | D | Interne Ordernummer NORDER nicht übergeben |
310 | D | Externe Ordernummer NORDEXT wurde nicht übergeben |
311 | D | &4 Bitte geben Sie eine gültige Fristigkeitsstruktur ein |
312 | D | &4 Die Ermittlung des Vorzeichens für das Geschäft ist gescheitert. |
313 | D | &4 Fehler bei der Ermittlung des Störungsergebnissses zum &. |
314 | D | &4 Die Kalkulationsregel & ist nicht vorhanden. |
315 | D | &4 Die Zusatzinformationen zum Finanzobjekt sind nicht vorhanden. |
316 | D | &4 Die Daten zum Darlehen konnten nicht vollständig ermittelt werden. |
317 | D | &4 Die Erzeugung eines IS-B Zahlungsstroms schlug fehl & &. |
318 | D | &4 Eine Leistungsstörung erster Art kann nicht verarbeitet werden. |
319 | D | &4 Eine Leistungsstörung erster Art kann nicht verarbeitet werden. |
320 | D | &4 Fehler beim Sichern der erzeugten Zahlungsströme |
321 | D | &4 Keine Berechtigung für & & |
322 | D | &4 Die Bewegungsart ist für Vertragsart & nicht zulässig |
323 | D | &4 Bitte zulässigen Wert eingeben (F4-Hilfe) |
324 | D | &4 Der Bestand erlaubt keine Fortschreibung über Orders |
325 | D | &4 Der Bestand erlaubt keine Fortschreibung über Geschäfte |
326 | D | &4 Es sind doppelte Einträge vorhanden |
327 | D | &4 Der folgende Bestand kann nicht mit der Regel & kalkuliert werden |
328 | D | &4(& &)Bestandsbildungskennzeichen erlaubt keine Bestandsaufbau/Fortschr. |
329 | D | &4 (Bestand &, Buchungskreis &) Interner Fehler beim Sperren |
330 | D | &4 Datensatz zum Kopf muß eine Position sein |
331 | D | &4 Bei Storno darf nur ein Datensatz übergeben werden |
332 | D | &4 Beim Update muß genau eine Position übergeben werden |
333 | D | Bewegung (& & & &) existiert nicht |
334 | D | Bewegung (& & & &) bereits vorhanden |
335 | D | &4 Das Leseverfahren OZ ist nicht einheitlich für die FristStruktur |
336 | D | &4 Fehler bei der Ermittlung des Kalkulationsstichtags |
337 | D | &4 Kursfaktoren zur Umrechnung von & nach & am & nicht gepflegt |
338 | D | &4 Bei Prozentnotierung muß der Nominalbetrag übergeben werden |
339 | D | &4 Wertpapierkennummer & ist nicht vorhanden |
340 | D | &4 Buchungskreiszusatzdaten zu & sind nicht gepflegt |
341 | D | &4 Bewegungsart & ist nicht vorhanden |
342 | D | &4 Der Wertpapierkurs (PWKURS) muß übergeben werden |
343 | D | &4 Wertstellungsdatum, Valutadatum und Orderdatum wurden nicht übergeben |
344 | D | Währungsumrechnung von & nach & am & mit Kurstyp & nicht möglich |
345 | D | &4 Bei Stücknotierung muß die Stückzahl übergeben werden |
346 | D | &4 Der Wertpapierkurs (KWKURS) muß übergeben werden |
347 | D | &4 Buchungskreis & ist nicht vorhanden |
348 | D | &4 Für '&.&' sind keine Periodenwerte für Vorgangsart E vorhanden |
349 | D | &4 Währungseinheit & nicht gepflegt (Customizing) |
350 | D | &4 Kalkulationsschema '&' ist der Bewertungsstrategie '&' nicht zugeord. |
351 | D | &4 Abrechnungsmethode der Gattung & erlaubt keine Berechnung |
352 | D | &4 Zum Finanzgeschäft existiert kein Bestand |
353 | D | &4 (Bukrs &, Darlehen &) Abrechnung bzw. Prolongation nicht mehr aktuell |
354 | D | &4 (Bukrs &) Vorangegangene Periode zum & nicht gefunden |
355 | D | &4 (Bukrs &, Darlehen &) Fehler bei der Anwendung des Prepayment-Ansatzes |
356 | D | &4 (Bukrs &, Geschäft &) Informationen zum IS-B Zahlungsstrom fehlen |
357 | D | &4 (Bukrs &, Geschäft &) Berechnung der Duration gescheitert |
358 | D | &4 (Bukrs &, Geschäft &) Zinsinformationen fehlen |
359 | D | &4 Zinskurve & in Währung & zum & nicht gefunden |
360 | D | &4 (Bukrs &, Geschäft &) Vollverzicht erfordert Sonderbehandlung für IS-B |
361 | D | &4 Geschäft besitzt keinen gültigen Status -> Keine Kalkulation |
362 | D | &4 Das Finanzgeschäft wurde storniert -> keine Kalkulation |
363 | D | &4 (Bukrs &, Geschäft &) Zahlungsstromtyp für Geschäft unzulässig |
364 | D | &4 Zahlungsstrom zur Order ist nicht vorhanden |
365 | D | &4 Es konnte kein passender Eintrag selektiert werden. |
366 | D | &4 Profit Center des Unverzinslichen Bestandes &1 nicht gepflegt |
367 | D | &4 Bei Wertpapieren kann der Zahlungsstrom nur angezeigt werden. |
368 | D | &4 Sachkonten des Unverzinslichen Bestandes &1 nicht gepflegt |
369 | D | &4 Das Lesen der Summentabelle des Ledgers &1 war nicht erfolgreich |
370 | D | &4 Sachkonto des Unverz. Bestandes &1 nicht in Bestandspos. enthalten |
371 | D | &4 Effektivzins konnte nicht berechnet werden |
372 | D | &4 Finanzstrom zur Order (& &) kann nicht aufgebaut werden |
373 | D | &4 Effektivzins zur Order (& &) kann nicht errechnet werden |
374 | D | &4 Die Profit Center des Unverz. Bestandes &1 sind nicht gepflegt |
375 | D | &4 Das Geschäft befindet sich in keinem gültigen Status |
376 | D | &4 Geschäft_ist_storniert_oder_nicht_im_Status_Vertrag_bzw._Abrechnung |
377 | D | &4 Das Lesen der Summentabelle des Ledgers &1 war nicht erfolgreich |
378 | D | &4 Kein Handelsplatz für die Bewertung gepflegt |
379 | D | &4 Zinskurvenart & in Währung & nicht gepflegt |
380 | D | &4 Der Ergebnisbereich & wird als Bankergebnisbereich geführt. |
381 | D | &4 Das Sachkonto & des Unverzinslichen Bestandes & ist nicht zulässig |
382 | D | &4 Der Profit Center & des Unverzinslichen Bestandes & ist nicht zulässig |
383 | D | &4 Die Profit Center Gruppe & des Unverz. Bestandes & ist nicht zulässig |
384 | D | &4 Das Bankprodukt '&1' darf nicht gelöscht werden. |
385 | D | &4 Bestand (Wertpapierbestand) kann nicht gesperrt werden |
386 | D | &4 Bestand (Devisenbestand) kann nicht gesperrt werden |
387 | D | &4 Bestand (Börsenderivate) kann nicht gesperrt werden |
388 | D | &4 Der Angegebene Zeitpunkt '&1' ist hier nicht erlaubt. |
389 | D | &4 Jeder Zeitpunkt darf zur einmal verwendet werden |
390 | D | &4 Wertfeldzuordnung fehlerhaft (&) |
391 | D | &4 Markieren Sie zunächst die gewünschte Zeile |
392 | D | &4 Daten sind bereits gesichert |
393 | D | &4 Daten sind nicht konsistent |
394 | D | &4 Der Eintrag ist bereits vorhanden. |
395 | D | &4 Die Daten sind durch Benutzer &1 gesperrt. |
396 | D | &4 Fehler im Transportwesen (Transportversuch gescheitert) |
397 | D | &4 Der Eintrag wurde in den Transportauftrag aufgenommen. |
398 | D | &4 Folgende Felder sind in der Kalkulationsregel nicht korrekt gepflegt: |
399 | D | - &1 |
400 | D | &4 Kapitalmaßnahme & nicht vorhanden |
401 | D | &4 (Bukrs: &1, Geschäft &2) hat nicht die geforderte Vertragsart (&3) |
402 | D | &4 Geben Sie einen zulässigen Nummernkreis an |
403 | D | Geben Sie einen Stichtag für die Umsetzung ein |
404 | D | Es ist kein Protokoll vorhanden |
405 | D | Fehler bei Protokollausgabe, Anzeige nicht möglich |
406 | D | Anzahl der gelöschten Protokolle: &1 |
407 | D | SAP-Banking: Umsetzung der Vertragswährung gestartet |
408 | D | SAP-Banking: Umsetzung mit Fehlern beendet |
409 | D | SAP-Banking: Umsetzung erfolgreich beendet |
410 | D | &4 Vertragsart: &1 |
411 | D | Fehler beim Schreiben des Protokolls |
412 | D | SAP-Banking: Umsetzung der Vertragswährung mit Warnungen beendet |
413 | D | &4 Gewichtungszeitraum und Anpassungsrhythmus sind nicht vollständig |
414 | D | (Objekt &1, &2, &3, &4) EURO-Umsetzung gescheitert bzw. mit Warnungen |
415 | D | SAP-Banking: Rücksetzung der Vertragswährung gestartet |
416 | D | Rücknahme der EURO-Umstellung nicht möglich |
417 | D | &4 Eine Position kann nicht ohne Stammteil eingefügt werden. |
418 | D | &4 Zu Bewegungsart & und Vertragsart & fehlen die Bewegungskennzeichen |
419 | D | Gattung & ist nicht vorhanden |
420 | D | Gattung & wurde noch nicht umgesetzt |
421 | D | Umrechnungkurs & nach & am & mit Kurstyp & nicht vorhanden |
422 | D | SAP-Banking: Start Kontenumsetzung |
423 | D | SAP-Banking: Start Kontenumsetzung - Storno |
424 | D | SAP-Banking: Ende Kontenumsetzung |
425 | D | SAP-Banking: Ende Kontenumsetzung - Storno |
426 | D | Selektierte Konten wurden nicht vorgemerkt |
427 | D | Umrechnungskurs von & nach & Kurstyp & zum & nicht vorhanden |
428 | D | Inverser Kurs zum Währungspaar (& &) am & kann nicht ermittelt werden |
429 | D | Konto (& & &) wurde noch nicht umgerechnet oder bereits storniert |
430 | D | Fehler bei Umrechnung von & nach & am & mit Kurstyp & |
431 | D | Konto (& & &) wurde bereits umgerechnet |
432 | D | &4 (Bukrs &, Geschäft &, Vorgang &) Zinsbewegung nicht gefunden |
433 | D | Folgende Konten wurden auf der Datenbank umgesetzt: |
434 | D | Konto : & & & |
435 | D | SAP-Banking: Start Gattungsumsetzung |
436 | D | SAP-Banking: Start Gattungsumsetzung - Storno |
437 | D | SAP-Banking: Ende Gattungsumsetzung |
438 | D | SAP-Banking: Ende Gattungsumsetzung - Storno |
439 | D | Fehler bei Umrechnung der Bestandswerte von & nach & am & mit Kurstyp & |
440 | D | Fehler bei Umrechnung der Zahlungsströme von & nach & am & mit Kurstyp & |
441 | D | Folgende Bestände wurden auf der Datenbank umgesetzt: |
442 | D | Bestand : & & & |
443 | D | Bestand (& & &) wurde noch nicht umgerechnet |
444 | D | Bestand (& & &) hat die falsche Währung |
445 | D | &4 Gattung & existiert nicht |
446 | D | &4 Das Verfahren ist für Börsenderivate z.Zt. noch nicht unterstützt |
447 | D | &4 Die Nachbearbeitung eines Zahlungsstroms ist mißlungen. |
448 | D | &4 Spezifizieren Sie den gewünschten Zahlungsstrom |
449 | D | &4 Das Prozeßschema '&1' ist im Kostenrechnungskreis '&2' nicht definiert |
450 | D | &4 Jedem Kostenrechnungskreis darf nur ein Template zugeordnet werden |
451 | D | &4 Zusatzbewegungen dürfen nur im Insert-Modus übergeben werden |
452 | D | &4 (Bukrs &, Geschäft &) Durchschnittsvolumen nicht berechnet |
453 | D | &4 (Bukrs &, Geschäft &) Geschäft ist nicht relevant |
454 | D | &4 Markieren Sie zunächst eine Spalte |
455 | D | &4 Es wurden &1 Einträge selektiert |
456 | D | &4 Muß/Kann-Steuerung nicht gefunden |
457 | D | &4 Bukrs &, Geschäft &: Modifikation bei Auszahlungen |
458 | D | &4 Bukrs &, Geschäft &: Darlehen nicht für SAP-Banking Umsetzung geeignet |
459 | D | &4 Bukrs &, Geschäft &: Customizing für Ausgleichsbewegungen fehlerhaft |
460 | D | &4 Bukrs &, Geschäft &: Summe der Teilverzichte zu groß |
461 | D | &4 Die Informationen zum Finanzobjekt sind nicht konsistent |
462 | D | Folgende Konten wurden im Testlauf umgesetzt: |
463 | D | Folgende Bestände wurden im Testlauf umgesetzt: |
464 | D | &4 Geben Sie eine zulässige Vertragsart ein |
465 | D | &4 Die Verarbeitung wurde erfolgreich beendet |
466 | D | &4 (Bukrs &, Geschäft &) Das Geschäft wurde bereits umgesetzt |
467 | D | &4 SAP-Banking: Devisenbestand gesperrt von Benutzer & |
468 | D | &4 SAP-Banking: Wertpapierbestand gesperrt von Benutzer & |
469 | D | &4 SAP-Banking: Bestand Börsenderivate gesperrt von Benutzer & |
470 | D | &4 SAP-Banking: Systemfehler in der Sperrverwaltung aufgetreten |
471 | D | &4 Keine Konditionen OZ gewichtete Anpassung (Geschäftswährung) |
472 | D | &4 Keine Konditionen OZ gewichtete Anpassung (Hauswährung) |
473 | D | &4 Zinssatz in GKM-Tabelle nicht gefunden (Kurve & & zum &) |
474 | D | &4 (Bukrs &, Geschäft &) Umstellungsstichtag unzulässig |
475 | D | &4 (Bukrs &, Geschäft &) aktueller Konditionskopf nicht vorhanden |
476 | D | &4 Tabelle für die Prozeßkosten konnten nicht angelegt werden. |
477 | D | &4 Bitte wählen Sie mindestens eine Finanzobjektart aus |
478 | D | &4 Interner Fehler beim Schreiben der Tabelle & |
479 | D | &4Kein Verbuchungsmerkmale in Ergebnisbereich & gepflegt (siehe Langtext) |
480 | D | &4 Das Bankkonto & des Bankkreises & ist noch nicht gültig. |
481 | D | &4 Das Bankkonto & des Bankkreises & wurde schon aufgelöst. |
482 | D | &4 Das Bankkonto & im Bankkreis & hat nicht freigegebene Konditionen |
483 | D | &4 Das Bankkonto & im Bankkreis & hat nicht freigegebene Limites. |
484 | D | &4 Das Bankkonto & im Bankkreis & existiert nicht. |
485 | D | &4 Bankkonto & im Bankkreis & hat nicht freigegebene Konditionsgruppen. |
486 | D | &4 Es sind keine Konditionen für den Bereitstellungszins vorhanden. |
487 | D | &4 Gattung & wurde bereits umgesetzt |
488 | D | &4 Währung Zusatzbeweg. muß Emissionswährung oder Abrechnungswährung sein |
489 | D | ( &1 &2 &3 &4 ) fehlerhafter Aufruf (interner Fehler) |
490 | D | ( &1 &2 &3 &4 ) Geschäft nicht im globalen Gedächtnis (interner Fehler) |
491 | D | &1 &2 &3 &4: Auszahlung konnte nicht eingefügt werden |
492 | D | &1 &2 &3 &4: Auszahlung konnte nicht verändert werden |
493 | D | ( &1 &2 &3 &4 ) Eintrag ist nicht vorhanden (interner Fehler) |
494 | D | &1 &2 &3 &4: Eintrag darf nicht verändert werden |
495 | D | &1 &2 &3 &4: Nummernvergabe gescheitert |
496 | D | ( &1 &2 &3 &4 ) maximale Stufennummer erreicht (interner Fehler) |
497 | D | &4 (Bukrs &1, Gesch. &2) Bearbeitung nicht möglich |
498 | D | &4 Fehler beim Speichern der Daten aufgetreten |
499 | D | &1 &2 &3 &4: Teilverzicht kann nicht verarbeitet werden |
500 | D | &1 &2 &3 &4: Konditionsart für Kapitalminderungen nicht zugeordnet |
501 | D | &4 Nummernvergabe für Orders im Buchungskreis & muß intern sein |
502 | D | &4 Bewegungsart & ist nicht zulässig |
503 | D | &4 Es muß ein Kopf mit genau einer Position übergeben werden |
504 | D | &4 Bei Umbuchungen muß SBEWARTAB vom Typ 'SD' (Umbu. Abgang) sein |
505 | D | &4 Bei Umbuchungen muß SBEWARTZU vom Typ 'AD' (Umbu. Zugang) sein |
506 | D | &1 &2 &3 &4: Keine Einträge zum Löschen vorhanden |
507 | D | &4 Bei Split/Tausch muß SBEWARTAB vom Typ 'SKM' (Bestandsabgang) sein |
508 | D | &4 Bei Split/Tausch muß SBEWARTZU vom Typ 'AKM' (Bestandszugang) sein |
509 | D | &1 &2 &3 &4: Individuelles Auszahlungsverhalten fehlerhaft |
510 | D | &4 Tausch- bzw. Splittingverhältnis (ZAEHLER/NENNER) muß gepflegt sein |
511 | D | ( &1 &2 &3 &4 ) Einfügen nicht möglich, da bereits Einträge vorhanden |
512 | D | ( &1 &2 &3 &4 ) Ändern nicht möglich, da keine Einträge vorhanden |
513 | D | &4 Kennummer Referenzpapier (REFRANL) muß übergeben werden |
514 | D | &4 Valutadatum (DVALUT) muß in der Position gefüllt sein |
515 | D | &4 Wertpapierbestand & & & nicht vorhanden |
516 | D | Bestandswert zum & (Bestand & & &) konnte nicht ermittelt werden |
517 | D | &4 Das individuelle Auszahlungsverhalten ist nicht konsistent. |
518 | D | &4 Bei Stücknotierung muß die Stückzahl (ASTUECK) gefüllt sein |
519 | D | &4 Quellbestand (& & &) nicht ausreichend |
520 | D | &4 Bei Prozentnotierung muß der Nominalbetrag (BNWHR) gefüllt sein |
521 | D | &4 Depot (& &) nicht vorhanden |
522 | D | &4 Typ der Bestandsänderung (&) ist nicht zulässig |
523 | D | &4 Gattung & ist nicht stücknotiert |
524 | D | &4 Gattung & ist nicht vorhanden |
525 | D | &4 Die Gattungen & und & müssen die gleiche Emissionswährung haben |
526 | D | &4 Geben Sie ein Kalkulationsdatum ein |
527 | D | &4 (BK &1/Geschäft &2) Zahlungstag und/oder Berechnungstag nicht gefüllt |
528 | D | &4 (BK &1/Geschäft &2) Inklusivkennzeichen fehlerhaft |
529 | D | &4 (BK &1/Geschäft &2) Ultimokennzeichen fehlerhaft |
530 | D | &4 (BK &1/Geschäft &2) Geldbetrag muß positiv sein |
531 | D | &4 (BK &1/Geschäft &2) Die Währung entspricht nicht der Geschäftswährung |
532 | D | &4 (BK &1/Geschäft &2) Zahlungstag liegt nicht in akt. Festschreibung |
533 | D | &4 (BK &1/Geschäft &2) Eingabe überschreitet Auszahlungsverpflichtung |
534 | D | &4 (BK &1/Geschäft &2) Berechnungstag nicht gefüllt bzw. fehlerhaft |
535 | D | &4 (BK &1/Geschäft &2) Berechnungstag nicht in akt. Festschreibung |
536 | D | &4 (BK &1/Geschäft &2) Eintrag an gleichem Tag bereits vorhanden |
537 | D | &4 (BK &1/Geschäft &2) Rundungsdifferenzen nicht korrigiert |
538 | D | &4 (BK &1/Geschäft &2) Auszahlungsverhalten hat keine Einträge |
539 | D | &4 (BK &1/Geschäft &2) Summe (&3) ungleich Zusagekapital (&4) |
540 | D | &4 (BK &1/Geschäft &2) geplanter Auszahlungszeitpunkt fehlerhaft |
541 | D | &4 (BK &1/Geschäft &2) Teilverzichte decken zugesagtes Kapital ab |
542 | D | &4 (BK &1/Geschäft &2) Auszahlungsverpflichtung darf nicht negativ sein |
543 | D | &4 Externe Nummer der Bestandsänderung RBAENEXT wurde nicht übergeben |
544 | D | &4 Bestandsänderung & existiert bereits |
545 | D | &4 Bestandsänderung & existiert nicht oder wurde storniert |
546 | D | &4Alle Sätze zu einer Order/Bestandsänderung benötigen den gleichen Modus |
547 | D | &4 Bestandsdatum (DBESTAND) muß in der Position gefüllt sein. |
548 | D | &4 Der Buchungskreis (BUKRS) ist ein Mußfeld |
549 | D | &4 Die Gattung (RANL) ist ein Mußfeld |
550 | D | &4 Das Depot (RLDEPO) ist ein Mußfeld |
551 | D | &4 Der Buchungskreis des Quellbestands (BUKRSQ) ist ein Mußfeld |
552 | D | &4 Das Depot des Quellbestands (RLDEPOQ) ist ein Mußfeld |
553 | D | &4 Der Buchungskreis des Zielbestands (BUKRSZ) ist ein Mußfeld |
554 | D | &4 Das Depot des Zielbestands (RLDEPOZ) ist ein Mußfeld |
555 | D | &4 Bewegungsart (SBEWART) ist ein Mußfeld |
556 | D | &4 Bewegungsart für Abgang (SBEWARTAB) ist ein Mußfeld |
557 | D | &4 Bewegungsart für Zugang (SBEWARTZU) ist ein Mußfeld |
558 | D | &4 Die Gattung des Quellbestands (RANLQ) ist ein Mußfeld |
559 | D | &4 Die Gattung des Zielbestands (RANLZ) ist ein Mußfeld |
560 | D | &4 Stornokennzeichen ungültig (Erlaubte Werte: '0' und '1') |
561 | D | &4 Geben Sie die Periode und das Geschäftsjahr an |
562 | D | &4 Geben Sie den Kalkulationsstichtag an |
563 | D | &4 Update-Modus ist bei dieser Bestandsänderung nicht erlaubt |
564 | D | &4 Bestandsänderung (&) kann nicht gesperrt werden |
565 | D | &4 Fehler bei Umrechnung Bestandsänd. von & nach & am & mit Kurstyp & |
566 | D | &4 (Ergebnisbereich: &1) Ermittlung der Periodengrenzen gescheitert |
567 | D | &4 Für einen Zahlungsstrom konnte das Ende-Datum nicht ermittelt werden. |
568 | D | &4 'Restströme' dürfen nicht angelegt werden |
569 | D | &4 Umrechnung Anschaffungswert von & nach & am & mit Kurstyp & gescheiter |
570 | D | &4 Bestand & erlaubt keine Fortschreibung |
571 | D | &4 Wählen Sie eine Konditionsposition aus. |
572 | D | &4 Markieren Sie eine zulässige Spalte (Prozentsatz oder Betrag) |
573 | D | &4 Die Abstimmung konnte nicht durchgeführt werden |
574 | D | &4 Bitte entweder einen Prozentsatz oder einen Betrag eingeben. |
575 | D | &4 Bei Zu-/Abgängen muß das Feld SZUABKNZ korrekt sein ('01' oder '02') |
576 | D | &4 Die Kalkulationsregel konnte nicht ermittelt werden |
577 | D | &4 Die Kalkulationsregel & hat nicht die Geschäftsart 'Knotenkalkulation' |
578 | D | &4 Gattung & muß Bezugsrecht oder Optionsschein auf Stücke sein |
579 | D | &4 Eine Abstimmung für das ausgewählte Feld ist nicht möglich |
580 | D | &4 Gattung & ist nicht als OS zum Underlying & angelegt |
581 | D | &4 Die Kalkulationsregel & ist nicht gültig. |
582 | D | &4 Der Initialwert kann nicht in das Mußfeld übernommen werden. |
583 | D | &4 Das Feld Stückzahl (ASTUECK) muß gefüllt sein |
584 | D | &4 Bitte nur eine Bewertungsalternative pro Reihenfolge auswählen |
585 | D | &4 Eine Datenbankoperation konnte nicht durchgeführt werden. |
586 | D | &4 (Bukrs &1, Geschäft &2) nicht mehr gültige Prolongationen entfernt |
587 | D | &4 Es ist bereits ein Eintrag mit gleichem Schlüssel (&1, &2) vorhanden. |
588 | D | &4 Für Geschäft (& &) ist kein Gegenwert gepflegt |
589 | D | &4 Marktsegment für Auswertungsart & und Bewertungsregel & nicht gepflegt |
590 | D | &4 Zahl/-Lieferungstag (DDISPO) muß in der Position gefüllt sein. |
591 | D | &4 Ergebnisbereich & ist noch nicht vollständig generiert |
592 | D | &4 Kein Referenzkurs im Finanzobjektzusatz gepflegt |
593 | D | &4 Kurs je Bezugsrecht (KWKURS) muß übergeben werden |
594 | D | &4 Die 'Von'-Periode liegt nach der 'Bis'-Periode |
595 | D | &4 Gattung & ist nicht als wandelbar in & angelegt |
596 | D | &4 Gattung & kann nicht in Gattung & gewandelt werden |
597 | D | &4 Gattung & ist keine Wandelanleihe |
598 | D | &4 Bestand (& & &) ist gesperrt |
599 | D | &4 Bestand (& & &) ist ab dem & nicht mehr änderbar |
600 | D | SAP Banking: Start der Umsetzung variabler Geschäfte im Echtlauf |
601 | D | Variables Geschäft &1 im Buchungskreis &2 wurde bereits umgerechnet |
602 | D | SAP Banking: Start der Umsetzung variabler Geschäfte im Testlauf |
603 | D | SAP Banking: Ende der Umsetzung variabler Geschäfte im Testlauf |
604 | D | Variables Geschäft &1 im Buchungskreis &2 erfolgreich umgesetzt |
605 | D | SAP Banking: Ende der Umsetzung Variabler Geschäfte im Echtlauf |
606 | D | Selektierte variable Geschäfte wurden nicht per FDÜ vorgemerkt |
607 | D | SAP Banking: Start Storno umgesetzter variabler Geschäfte im Echtlauf |
608 | D | Variables Geschäft &1 im Buchungskreis &2 noch nicht umgerechnet |
609 | D | Variables Geschäft &1 im Buchungskreis &2 ist bereits storniert |
610 | D | SAP Banking: Start Storno umgesetzter variabler Geschäfte im Testlauf |
611 | D | SAP Banking: Ende Storno umgesetzter variabler Geschäfte im Testlauf |
612 | D | SAP Banking: Ende Storno umgesetzter variabler Geschäfte im Echtlauf |
613 | D | &4 Bestandswert zur & (Bestand & & &) erlaubt keine Fortschreibung |
614 | D | &4 Zahlungsstrom konnte nicht aufgebaut werden |
615 | D | &4 Zinscoupons in verschiedenen Währungen noch nicht unterstützt |
616 | D | &4 Für das Geschäft konnte keine Kalkulationsregel ermittelt werden |
617 | D | &4 Bitte entweder die Vertragsnummer oder die Alternativnummer angeben |
618 | D | &4 (Bukrs. &, Gesch. &) keine Leistungsstörung erster Art zulässig |
619 | D | &4 Anlageform & ist für theoretische Preisermittelung nicht unterstützt |
620 | D | &4 Verarbeitung im Testlauf - keine Datenbankänderungen |
621 | D | &4 Verarbeitung im Echtlauf |
622 | D | &4 (Bukrs. &1, Gesch. &2 / &3) Verarbeitung erfolgreich abgeschlossen |
623 | D | &4 (Bukrs. &1, Gesch. &2 / &3) Verarbeitung fehlerhaft |
624 | D | &4 Verarbeitung beendet mit Ergebnis: &1 = &2 |
625 | D | &4 Kalkulationsstichtag (Von) muß vor Kalkulationsstichtag (Bis) liegen |
626 | D | &4 Keine Tilgungsbewegungen gefunden |
627 | D | &4 Der Opportunitätszins ist kleiner als null |
628 | D | &4 Periode (Von) muß vor Periode (Bis) liegen |
629 | D | &4 Fehler beim Ermitteln der Periodendaten |
630 | D | &4 Fehler beim Sichern aufgetreten. Abbruch ! |
631 | D | &4Bei Devisenbeständen keine Berechn. der Opportunität gemäß Marktvolumen |
632 | D | Bankenkontokorrent: Konto &1 im Bankkreis &2 Geschäftsdiff. &3 |
633 | D | Generisches Geschäft (Risiko): Interne Geschäftsnummer &1 |
634 | D | Variables Geschäft &1 im Buchungskreis &2 erfolgreich umgesetzt |
635 | D | &4 Währung des Variablen Geschäftes &1 im Buchungskreis &2 ist initial. |
636 | D | Variables Geschäft &1 im Buchungskr. &2 wurde erfolgreich storniert |
637 | D | Variables Geschäft &1 im Buchungskr. &2 wuerde erfolgreich storniert |
638 | D | &4 Abschlußdatum (DSCHLUSS) der Order ist nicht gefüllt |
639 | D | &4 Wertpapierorder (& &) wurde mehrfach übergeben |
640 | D | &4(Bukrs. &1, Geschäft. &2) Customizing zur Finanzgeschäftsart fehlerhaft |
641 | D | &4 (Bukrs. &1, Geschäft. &2) kein relevanter Vorgang vorhanden |
642 | D | &4 Stornofunktion nur bei Auswahl von Stichtagen unterstützt |
643 | D | &4 Stornofunktion nur im Echtlauf möglich |
644 | D | &4 Die Geschäftsart ist nicht vorhanden |
645 | D | &4 Die Geschäftsseite ist nicht vorhanden |
646 | D | &4Übergabe Kundenzins in der Planung bei Volumenkalkulation nicht möglich |
647 | D | &4 Der Geschäftsart &1 darf nur eine Geschäftsseite zugeordnet werden. |
648 | D | &4 Der Geschäftsart &1 ist keine Geschäftsseite zugeordnet. |
649 | D | &4 Die Bewegungsart ist nicht vorhanden |
650 | D | &4 Der Berechnungstyp ist nicht vorhanden |
651 | D | &4 Die Geschäftsseite &1 ist der Geschäftsart &2 nicht zugeordnet. |
652 | D | &4 Bezeichnung zur Geschäftsart &1 in Sprache &2 nicht gepflegt. |
653 | D | &4 Bezeichnung zur Geschäftsseite &1 in Sprache &2 nicht vorhanden. |
654 | D | &4 Bezeichnung zur Bewegungsart &1 in Sprache &2 nicht vorhanden. |
655 | D | &4 Der Geschäftsart &1 ist keine Bewegungsart zugeordnet. |
656 | D | &4 Zinsanpassungstermine konnten nicht ermittelt werden |
657 | D | &4 Forwardrate zu Referenz & und Feststellungsdatum & nicht berechnet |
658 | D | &4 Kein Zinssatz zur Referenz & am & gepflegt |
659 | D | &4 Zahlungsstrom (Typ &1, Datum &2): Effektivzins nicht berechnet |
660 | D | &4 &1 erfolgreich kalkuliert |
661 | D | &4 Konto &1 im Bankkreis &2 ist Teil einer Zinskompensationshierarchie. |
662 | D | &4 Mittlere Laufzeit (gewichtete Rückflüsse) kleiner oder gleich null |
663 | D | &4 Schlüsselfelder müssen 'eingabebereit' sein (Muß- oder Kannfeld) |
664 | D | Variables Geschäft '&1' im Buchungskreis '&2' |
665 | D | &4 Detailprotokoll bei gefüllter Fremdwährung nicht unterstützt |
666 | D | &4 Das Feld &1 darf nicht gefüllt werden |
667 | D | &4 Gattung & & |
668 | D | &4 Bei Darlehen RANLALT1= &1, BUKRS= &2 ist das Feld ROLE ein Mußfeld. |
669 | D | &4 Die Rolle = &1 ist nicht gepflegt worden |
670 | D | &4 Der Rolle = &1 muß der Rollentyp &2 bzw. &3 zugewiesen sein |
671 | D | &4 Gattung & Optionsschein. Gattungsdaten nicht gefunden |
672 | D | &4 Optionsschein ausüben. Gattung & nicht vollständig gepflegt |
673 | D | &4 Gattung & Bezugsrecht. Gattungsdaten nicht gefunden |
674 | D | &4 Bezugsrecht ausüben. Gattung & nicht vollständig gepflegt |
675 | D | &4 Gattung & Aktientausch. Gattungsdaten nicht gefunden |
676 | D | &4 Aktientausch. Gattung & nicht vollständig gepflegt |
677 | D | &4 Gattung & Wandelanleihe. Gattungsdaten nicht gefunden |
678 | D | &4 Wandelung. Gattung & nicht vollständig gepflegt |
679 | D | &4 Gattung & Ausübung mit Barausgleich werden nicht unterstützt |
680 | D | &4 Gattung & muß Bezugsrecht auf Aktie sein |
681 | D | &4 Bestandsänderung &. Wert der Put-Optionsscheine grösser als Basiswert |
682 | D | &4 Die Bewertungsstrategie '&1' wird doppelt verwendet |
683 | D | &4 Bitte wählen Sie eine Protokollart aus |
684 | D | &4 Finanzobjekt-Integration: Customizing Einstellungen nicht vorhanden |
685 | D | &4 Wählen Sie ein Selektionsmerkmal mit dem Datenelement PRCTR aus |
686 | D | &4 Geben Sie eine gültige Vorgangsart ein |
687 | D | &4 Wählen Sie nur zulässige Profit Center in den Selektionsparametern |
688 | D | &4 Wählen Sie ein zulässiges Wertfeld des Ergebnisbereichs aus |
689 | D | &4 Wählen Sie ein zulässiges Ziel-Profit Center |
690 | D | &4 Wählen Sie eine zulässige Kostenart des aktuellen Kontenplans &2 |
691 | D | &4 Wählen Sie einen zulässigen Kostenrechnungskreis |
692 | D | &4 Pflegen Sie die Wertfelder/Kostenart-Zuordnung zum Kokrs &1. |
693 | D | &4 Das Feld &1 ist nicht vom Typ 'Währungsbetrag'. |
694 | D | &4 Interner Fehler: Feld &1 in Zuordnung Erkrs aber nicht in Feldkatlog |
695 | D | &4 Das Feld &1 ist nicht vom Typ 'Basiskennzahl' |
696 | D | &4 Dem Kostenrechnungskreis &1 ist noch kein Kontenplan zugeordnet |
697 | D | &4 Das Ziel-Profit Center & darf nicht in Selektionsmenge der Sender sein |
698 | D | Interner Fehler in der Viewpflege für V_JBDFTPASSIGNM (RC=&1). |
699 | D | Sie haben keine Berechtigung zur Viewpflege von V_JBDFTPASSIGNM |
700 | D | &4 & ist kein zulässiges Merkmal |
701 | D | &4 Es wurde kein Geschäftsbeginn angegeben |
702 | D | &4 Es wurde kein Geschäftsende angegeben |
703 | D | &4Die Auf- und Abschläge führen zu einem negativem Opportunitätszinssatz. |
704 | D | &4Kein gültiger Konditionskopf zur Bestimmung der Zinsberechnungsmethode. |
705 | D | &4Zinsberechnungsmethode 'actW/252' wird im SEM Banking nicht unterstützt |
706 | D | &4 Ergebnisobjektnummer konnte nicht ermittelt werden |
707 | D | &4 Keine Daten selektiert |
708 | D | &4 Wertpapierkurs (PWKURS) kann maximal 999,999999 betragen |
709 | D | &4 Order (& &) existiert bereits. Modusfeld auf 'U' (Update) gesetzt. |
710 | D | &4 View/Tabelle ist durch anderen Benutzer gesperrt |
711 | D | Fehlende Pflegeberechtigung für V_JBDFTPASSIGNM, nur Anzeigen möglich |
712 | D | &4 Bitte geben Sie mindestens ein zulässiges Sender-Profit Center an. |
713 | D | &4 Order (& &) existiert noch nicht, Modusfeld auf 'I' (Insert) gesetzt |
714 | D | &4 Sie haben keine Berechtigung, den CO-Vorgang &1 auszuführen |
715 | D | &4 Keine Werte zum Buchen von &1 (Inhalte Null) im Profitcenter &2 |
716 | D | &4 Keine Daten selektiert für diese Profit Center |
717 | D | &4 Keine Belege zu stornieren für Jahr,Periode &1 |
718 | D | &4 Das Feld '&' (&) muss initial oder gleich Emissionswährung (&) sein |
719 | D | &4 Bei Änderung des Stammteils muß der Darlehensnehmer angegeben werden. |
720 | D | &4 Fortschreibung Profit-Center-Rechnung für &1 nicht erfolgt |
721 | D | &4 Es gibt keine zulässige Kostenarten im Kontenplan &1 des Kokrs &2 |
722 | D | &4 Keine gültige Zuordnung Wertfeld zu Kostenart definiert in Kokrs &1 |
723 | D | &4 Kein zulässiger Typ für Kostenart &1. |
724 | D | Start der Umsetzung der Tabelle JBDKKOF im Echtlauf |
725 | D | Start der Umsetzung der Tabelle JBDKKOF im Testlauf |
726 | D | Die Tabelle JBDKKOF enthält keine Einträge |
727 | D | Ende der Umsetzung der Tabelle JBDKKOF im Echtlauf |
728 | D | Ende der Umsetzung der Tabelle JBDKKOF im Testlauf |
729 | D | Die Einträge der JBDKKOF zu der Objektnummer &1 werden umgesetzt |
730 | D | Die Einträge der JBDKKOF zu der Objektnummer &1 werden nicht umgesetzt |
731 | D | &4 Interner Fehler in Berechtigungsprüfung K_VRGNG. |
732 | D | &4 Der Geschäftspartner mit Ext. Partnernummer & existiert nicht |
733 | D | &4 Der berechnete Durchschnittszinssatz ist zu groß. |
734 | D | &4 GLD nach Valutadatum und Wertpapierkurs zum & wurden nicht gefunden. |
735 | D | &4 Wertpapiergattung & ist nicht aktiv. |
736 | D | &4 Für den verwendeten Nummernkreis muß interne Nummernvergabe gelten. |
737 | D | &4 Keine Bewegungen zum Zahlungsstrom &1 gefunden |
738 | D | &4 Datenschiefstand in Periode &1 |
739 | D | &4 Kalkulation des Geschäfts &1 &2 fehlerhaft |
740 | D | &4 Kaklulation des Geschäfts &2 &3 ist nicht mehr möglich |
741 | D | &4 Keine BCA-Abgrenzung vor dem Periodenbeginn &1 gefunden |
742 | D | &4 Keine BCA-Abgrenzung zu dem Kalkulationsstichtag &1 gefunden |
743 | D | &4 Interner Fehler. Falsche Inputparameter |
744 | D | &4 Die Gebühren und Provisionen werden doppelt übernommen |
745 | D | &4 Interner Fehler |
750 | D | &4 Zahlungsstrompflege nicht mehr erlaubt |
751 | D | &4 Tabellenname &1 nicht erlaubt |
752 | D | &4 Keine Berechtigung zum Löschen der Tabellen /1ISB/COA* |
760 | D | &4 Accounting Kreis & ist kein SEM-aktiver CFM-Bewertungsbereich zugeordn |
773 | D | &4 Für Kostenrechnungskreis & keine eindeutige Zuordnung eines Templates |
774 | D | &4 Zu Template & keine eindeutige Zuordnung eines Ergebnisbereichs |
775 | D | &4 Geben Sie eine Geschäftsdifferenzierung an |
776 | D | &4 Geben Sie einen Wert zu der Teilzeichenkette an |
777 | D | &4Die Anfangsposition der Teilzeichenkette ist größer als die Endposition |
778 | D | &4 Ableitungsvorschriften zur Vorkalkulation müssen umgesetzt werden |
780 | D | Zu der Kalkulationsregel '&1' fehlt die Tranchenparametrisierung. |
781 | D | Füllen Sie das Feld '&1' |
782 | D | Füllen Sie die Felder '&1' und '&2' zusammen oder gar nicht |
783 | D | Bei gefüllter Zinskurvenart soll das Feld '&1' gefüllt sein |
784 | D | Füllen Sie bitte genau eines der Felder '&1' und '&2' |
785 | D | Da Sie eine explizite Angabe ausgewählt haben, füllen Sie das Feld '&1' |
786 | D | Bei leerer Zinskurvenart soll das Feld '&1' nicht gefüllt sein |
787 | D | Sie haben Beginn und Ende gefüllt, füllen Sie auch die Schrittweite |
788 | D | Beginn soll kleiner oder gleich dem Ende sein |
789 | D | Tranche &1 der Kalkulationsregel '&2' enthält folgende Fehler: |
790 | D | Die Kalkulationsregel '&2' enthält folgende Fehler: |
791 | D | Keine Tranche ist als relevant für die Zinsmethode gekennzeichnet |
792 | D | Mehr als eine Tranche ist als relevant für die Zinsmethode gekennzeichnet |
793 | D | Keine aktive Business Add-In Implementierung gefunden |
794 | D | Referenzzins &1 ist nicht definiert oder unvollständig |
795 | D | Datum des Anpassungsbeginn ist Null |
796 | D | Fester Zinssatz und Zinskurvenart oder Referenzzins angegeben |
797 | D | Fester Zinssatz ohne Zinsberechnungsmethode angegeben |
800 | D | &4 &1 Schlüsseleinträge des Geschäfts &2 wurden geändert |
000 | E | Start of RA changed from & to period & |
001 | E | Enter a valid value |
002 | E | Enter at least the weighting factor in '%' and the OI term |
003 | E | Total weighting is &%. Correct this |
004 | E | Check the setting for '&'. |
005 | E | No key figure scheme assigned to the costing rule |
006 | E | Maintain the opportunity interest weighting |
007 | E | Costing rule saved |
008 | E | Error while saving costing rule |
009 | E | Costing rule '&' already exists |
010 | E | Costing rule '&' does not yet exist |
011 | E | Error while reading table '&' |
012 | E | Costing rule is consistent |
013 | E | Error while deleting costing rule '&' |
014 | E | Costing rule '&' deleted |
015 | E | Costing rule '&1' copied to '&2' |
016 | E | Select a costing rule |
017 | E | Costing rule '&' is being transported |
018 | E | Costing rule '&' is inconsistent |
019 | E | &4 Costing period &1 is outside transaction term &2 |
020 | E | Error while determining procedures |
021 | E | Costing rule assigned to a bank product, deletion not permitted |
022 | E | &4 Invalid condition item transferred (for interest adjustment) (No. '&') |
023 | E | &4 Not possible to determine dates to fix interest (no. '&') |
024 | E | &4: Error while calculating a forward rate for '&' (no. '&') |
025 | E | &4: Error while determining the reference interest rate for '&' (no. '&') |
026 | E | &4: Unable to create cash flow (no. '&') |
027 | E | Transaction termination |
028 | E | Account no.(int./ext.) '&/&' company code '&' transaction diff '&' |
029 | E | Financial object no.'&' transaction diff. '&' |
030 | E | Maintain costing sheet for reserve requirement ratios (-> long text) |
031 | E | If you do not enter any restrictions, all costing rules are selected |
032 | E | If you do not enter any restrictions, all products are selected |
033 | E | Enter a description for the costing rule |
034 | E | Contract no. (int./ext.) '&/&' company code '&' |
035 | E | Order no. (int./ext.) '&/&' company code '&' |
036 | E | Service number (int./ext.) '&/&' company code '&' |
037 | E | Transaction number '&' company code '&' |
038 | E | Non-interest-bearing position '&' |
039 | E | Securities/Forex position '&' |
040 | E | Costing rule '&' currently being processed by user '&' |
041 | E | &4: Error during cash flow generation from loans |
042 | E | &4: Error during cash flow generation from loans |
043 | E | All bank products already allocated |
044 | E | &4: System cannot determine fiscal year and period |
045 | E | &4: Operating concern not valid for transaction |
046 | E | No transactions selected |
047 | E | &4: System cannot find costing rule for transaction |
048 | E | &4: System cannot find product category for transaction |
049 | E | Error occurred while saving costing data |
050 | E | &4: System cannot cost transaction '&' |
051 | E | Start of period or end of period not found |
052 | E | &4 Transaction is already closed for the current period |
053 | E | &4: Transaction not yet costed for the previous period |
054 | E | End of period not equal to costing date, period cannot be closed |
055 | E | &4: Turnover and daily balances transferred for account & & & |
056 | E | &4: No backdating for rule & |
057 | E | &4: Transaction not yet costed for current period |
058 | E | Assignment table locked by user &. (See display) |
059 | E | Error when saving bank product assigment |
060 | E | Bank product assigment saved |
061 | E | &4 Cash flow already exists |
062 | E | &4 Cash flow does not exist |
063 | E | &4: Copying of characteristics for reference transaction '&' failed |
064 | E | &4 Object is already locked |
065 | E | Enter a 'Valid from' date |
066 | E | Enter a valid bank product |
067 | E | Enter a (valid) costing rule |
068 | E | Keys entered twice |
069 | E | Correct your entries first |
070 | E | Enter an (appropriate) product type |
071 | E | &4 Costing not possible, transaction & deleted or canceled |
072 | E | Test: Roll name - '&' |
073 | E | Asset/Liability indicator of costing rule is inconsistent |
074 | E | Product type not appropriate for all costing rules |
075 | E | Assignment does not yet include a reference product and a variant |
076 | E | Asset/liability indicator of one or more reference rules invalid |
077 | E | Not all reference rules permit reference products |
078 | E | &4 Only line item list can be displayed for activity type '&' |
079 | E | &4: No minimum reserve key dates were determined for country & |
080 | E | &4 System unable to manage positions for product category '&1' |
081 | E | &4: Several cash flow disturbances found for transaction & |
082 | E | &4: Transaction &/& is not yet concluded for &/& |
083 | E | &4: Currency translation (&) failed for & |
084 | E | &4: No cash flow transferred for transaction & |
085 | E | &4 Flow type not permitted for contract type of transaction |
086 | E | &4 Data saved |
087 | E | &4: Operating concern could not be determined |
088 | E | &4 Unable to determine period for date & transaction & |
089 | E | &4: Cash flow deleted |
090 | E | &4: No cash flow exists |
091 | E | &4: Transaction deleted or reversed |
092 | E | &4 Position locked by user & |
093 | E | &4 Product type does not exist |
094 | E | &4: No costing data exists for position & |
095 | E | &4: Asset master missing for position & |
096 | E | &4: System cannot determine contract type for transaction |
097 | E | &4 Transaction does not exist |
098 | E | Required field entry missing, check your entry |
099 | E | One field cannot be filled, check your entry |
100 | E | &4 Required database access mode & is not possible |
101 | E | &4 Condition type does not exist |
102 | E | &4 Product type &1 does not exist for loan &2 &3 |
103 | E | &4 Condition type or condition group is incorrect |
104 | E | &4 Condition type text is not maintained |
105 | E | &4 Condition header is not plausible |
106 | E | &4 Condition item is not plausible |
107 | E | Internal object number can not be assigned |
108 | E | &4 Product type is incorrect |
109 | E | &4 Interest calculation method & is incorrect |
110 | E | &4 Inclusive indicator for calculation date is incorrect |
111 | E | &4 Inclusive indicator for due date is incorrect |
112 | E | &4: Wrong key for moving calculation date to working day |
113 | E | &4: Wrong key for moving due date to working day |
114 | E | &4: Wrong key for moving planning date to working day |
115 | E | &4 Wrong key for determination method of next calculation date |
116 | E | &4 Wrong key for determination method of next due date |
117 | E | &4 Key for pro rata temporis calculation is incorrect |
118 | E | &4 Key for reading due date is incorrect |
119 | E | &4 No bank products selected |
120 | E | Enter a costing key date for key date costing |
121 | E | &4 Cash flow for periodization does not exist |
122 | E | &4 Financial object (&1) is locked and cannot be costed |
123 | E | &4: Error when determining the price of a transfer posting |
124 | E | &4 Value & is not valid for field & (fixed value check) |
125 | E | &4: Last page of list |
126 | E | &4 Value & is not valid for field & (value table check) |
127 | E | &4: No fixed values exist for field & |
128 | E | &4: Costing sheet & unknown |
129 | E | &4: Operating concern & unknown |
130 | E | Field & requires an entry, it must not be left blank |
131 | E | Field & does not require an entry |
132 | E | &4 No asset master exists for securities ID number & |
133 | E | &4 Index of incorrect record is & |
134 | E | &4 Select a valid function |
135 | E | &4 No access sequence is assigned to this level |
136 | E | &4 Costing sheet must comprise usage &1 and application &2 |
137 | E | &4 Enter a valid costing sheet |
138 | E | &4: Start of term later than or equal to end of term |
139 | E | &4 Repayment type does not exist |
140 | E | &4 Position indicator & & & does not exist |
141 | E | &4 Fields RANLALT1 and RANL are empty |
142 | E | &4: Error in assigning numbers for reference transactions |
143 | E | &4 Cash flow category & is only permitted for transfering data |
144 | E | &4: Cash flow type & already exists for transaction |
145 | E | &4: Cash flow blocked by user & |
146 | E | &4 Operating concern & is not a bank operating concern |
147 | E | &4 Unable to make 1:1 assignment with external number & |
148 | E | &4 Inconsistent data: Ext. no.&1, int. no.(data) &2, int. no.(fr.ext.) &3 |
149 | E | &4 Internal numbers determined: & |
150 | E | & & & & |
151 | E | &4 Value date capital &1 more than commitment capital &2 |
152 | E | &4 System cannot find flow type for disbursement (condition group &) |
153 | E | &4 Conditions (headers) for loan & not found |
154 | E | &4 System cannot find conditions (items) for loan & |
155 | E | &4 Simulated full disbursement after end of transaction term. |
156 | E | &4 System cannot find condition group for product type & |
157 | E | &4: System cannot generate cash flow for loan & |
158 | E | &4: System cannot find flow type with flow category & |
159 | E | &4 Validity date for cash flow must come before first flow |
160 | E | &4 Periodic effective capital not calculated |
161 | E | &4 System cannot find discounting factor for & & & |
162 | E | &4 NPV of average effective capital not calculated |
163 | E | &4 Interest contribution not calculated |
164 | E | &4 Opportunity contribution not calculated. |
165 | E | &4 Some flows do not have a flow type |
166 | E | &4 Effective interest rate less than -99 % or greater than 99999 % |
167 | E | &4 Effective interest rate not calculated |
168 | E | &4 Effective interest rate for opportunity has not been calculated |
169 | E | &4 Residual margin has not been calculated |
170 | E | &4 System has not calculated currency transformation contribution |
171 | E | &4 System has not calculated reserve requirement costs (NPV) |
172 | E | &4 Error in periodization process for minimum reserve costs |
173 | E | &4 More than one settlement cash flow found |
174 | E | &4 Internal error occurred during rollover |
175 | E | &4 Cash flow disturbance: Data missing (internal) |
176 | E | &4 No commitment/settlement exists |
177 | E | &4 System cannot find items for settlement (internal) |
178 | E | &4 No final settlement exists |
179 | E | &4 Transaction & does not have contract or contract settlement status |
180 | E | &4 System cannot find calendar from reference interest rate & |
181 | E | &4 Calendar from reference interest rate & no longer valid |
182 | E | &4 Reference interest rate & not maintained |
183 | E | &4 Yield curve from reference interest rate & not maintained |
184 | E | &4 System cannot find yield curve from reference interest rate & |
185 | E | &4 System cannot find yield curve & & & |
186 | E | &4 Bid curve or ask curve not maintained |
187 | E | &4 Exchange rate type not maintained |
188 | E | &4 System cannot translate from & to & on & with exchange rate type & |
189 | E | &4 Internal error, System cannot find position value |
190 | E | Secur.price for ID no. & date & stock exch.& rate type & missing |
191 | E | &4 System cannot create cash flow for & |
192 | E | &4 System cannot calculate effective interest rate from & to & |
193 | E | &4 System cannot find opportunity interest rate |
194 | E | &4 Enter a valid bank product variant |
195 | E | &4 Enter an assignment date |
196 | E | &4 Historical weighting is not consistent for the maturity pattern |
197 | E | &4 Date outside the validity area |
198 | E | &4 System cannot find interest rate in interest rate table (curve: & &) |
199 | E | &4 Internal error, expired days in reporting period - 0 |
200 | E | &4 No nominal interest conditions found |
201 | E | &4 no condition header available |
202 | E | &4 No conditions exist for OI transaction currency |
203 | E | &4 No conditions exist for OI local currency |
204 | E | &4 Internal error, days in year - 0 |
205 | E | &4 No conditions for credit line transaction |
206 | E | &4 Daily balances missing |
207 | E | &4 System cannot find nominal interest rate |
208 | E | &4 no conditions exist for 'fixed margin' |
209 | E | &4 No conditions exist for 'non-utilized credit line' |
210 | E | &4 Internal error, unable to run periodization |
211 | E | &4 System cannot modify internal table |
212 | E | &4 Cash flow contains errors: |
213 | E | &4 Valid from & , cash flow & , category & |
214 | E | &4 System cannot find items (effective capital) for cash flow &1 |
215 | E | &4 No cash flow for periodization |
216 | E | &4 Existing cash flows: |
217 | E | &4 Asset/liability indic. is not consistent for the maturity structure |
218 | E | &4 System cannot run periodization with commitment/settlement |
219 | E | &4 Validity date (&) comes after period end |
220 | E | &4 No financial transactions assigned |
221 | E | &4 No financial transactions found |
222 | E | &4 System cannot find transaction & (company code &) |
223 | E | &4 No financial transaction flows exist |
224 | E | &4 No flows exist for financial transaction & (company code &) |
225 | E | &4 Financial transaction &1 (company code &2) is missing flow type &3 |
226 | E | &4 (-> Long text) flow type & is missing for fin. trans. & (co. code &) |
227 | E | &4 System cannot find any financial transaction activities |
228 | E | &4 Activity &1 for financial transaction &2 (co.code &3) does not exist |
229 | E | &4 Internal error, system cannot find position value before & |
230 | E | &4 (-> long text) No flows for financial transaction & (co.code &) ... |
231 | E | &4 Internal error, system cannot calculate forward rate |
232 | E | &4 Non-int.-brg-pos. has no FI ref.or totals table not found for ledger |
233 | E | &4 Internal error: Average balance for position & could not be calculated |
234 | E | &4 Length of period cannot be calculated |
235 | E | &4 Position not updated until & |
236 | E | &4 (Position &, company code &) position cannot be blocked |
237 | E | &4 No position exists for the position criteria |
238 | E | &4 Assigned costing rule allows no position update |
239 | E | &4 (Position &, Company Code &) Internal error while saving pos. values |
240 | E | &4 Order number is not filled |
241 | E | &4 External order number is empty |
242 | E | &4 Maintain transaction differentiation for reference product |
243 | E | &4 Loan does not exist |
244 | E | &4 Financial transaction does not exist |
245 | E | &4 No financial object exists for loan |
246 | E | &4 No financial object exists for transaction |
247 | E | &4 Internal partner number is incorrect (-> long text) |
248 | E | &4 External partner number is incorrect (-> long text) |
249 | E | &4 Leading/following currency not defined for pair & / & |
250 | E | &4 Nominal interest rate conditions are incomplete |
251 | E | &4 No entry in TZUNI (exchange ratios) for currency & |
252 | E | &4 Number range object & no. range & for order no. missing in co. code & |
253 | E | &4 First record must be a header |
254 | E | &4 One item must be transferred for a header |
255 | E | &4 Only a header cancellation may be transferred as a single record |
256 | E | &4 Data records may only be transferred in insert or update mode |
257 | E | &4 Order (& & &) already exists |
258 | E | &4 Order (& & &) does not exist or was reversed |
259 | E | &4 Company code & does not exist |
260 | E | &4 Securities ID number & does not exist |
261 | E | &4 Company code position (& &) does not exist |
262 | E | &4 Securities account position (& & &) does not exist |
263 | E | &4 Operating concern cannot begin with '0M' |
264 | E | &4 Required data is blocked |
265 | E | &4 Cash flow has an invalid category |
266 | E | &4 Type 2 cash flow disturbance is not permitted |
267 | E | &4 Interest rate not found in money and capital market table (& & &) |
268 | E | &4 Rollover cash flow (for &) does not exist |
269 | E | &4 IS-B: Unable to calculate cash flow disturbance (object number '&') |
270 | E | &4 Enter a start period for periodic costing |
271 | E | &4 Loan for cash flow disturbance is missing (& & &) |
272 | E | &4 Disturbance is removed before flow (& & &) |
273 | E | &4 Cash flow you want to disturb does not exist (& & &) |
274 | E | &4 Cash flow you want to disturb has invalid category |
275 | E | &4 Payment you want to disturb does not exist (& & &) |
276 | E | &4 Mode of cash flow disturbance changed |
277 | E | &4 Mode of cash flow disturbance not permitted |
278 | E | &4 Flow type is empty (& & &) |
279 | E | &4 Date of flow is empty (& & &) |
280 | E | &4 Date of disturbance removal is empty (& & &) |
281 | E | &4 Disturbance removal amount is empty (& & &) |
282 | E | &4 Mode of disturbance removal is empty (& & &) |
283 | E | &4 Internal level 'order settlement' is not assigned to status & |
284 | E | &4 Business partner & does not exist |
285 | E | &4 Paying bank & does not exist |
286 | E | &4 Flow type & is invalid |
287 | E | &4 Flow type & is neither a purchase nor a sale |
288 | E | &4 Error while translating & to & with rate & |
289 | E | &4 Transaction does not have a valid status |
290 | E | &4 Error in lock management |
291 | E | &4 Financial object already locked by user & |
292 | E | &4 Internal error, object number not maintained |
293 | E | &4 Master data not found for loan & |
294 | E | &4 Transport not possible |
295 | E | Dummy - error message for cash flows (& & & &) |
296 | E | &4 Table & does not exist, check your entries |
297 | E | &4 Table & already exists |
298 | E | &4 Table & successfully inserted |
299 | E | &4 Tables successfully removed |
300 | E | &4 One of the entries in table & is too long |
301 | E | &4 Tables are locked by user & |
302 | E | &4 Operating concern may only be maintained in Bank PA |
303 | E | &4 Operating concern can only be maintained in standard profit. analysis |
304 | E | &4 Value required for interest calculation method field is missing |
305 | E | &4 Cash flow must not be deleted |
306 | E | &4 No transaction value maintained for forex transaction (&1 &2) |
307 | E | &4 No position exists for the transaction |
308 | E | &4 Position missing for forex transaction |
309 | E | Internal order number NORDER not transferred |
310 | E | External order number NORDEXT not transferred |
311 | E | &4 Enter a valid maturity structure |
312 | E | &4 Unable to determine +/- sign for transaction |
313 | E | &4 Error occurred when determining disturbance result for & |
314 | E | &4 Costing rule & does not exist |
315 | E | &4 No additional information exists for financial object |
316 | E | &4 Unable to completely determine the loan data |
317 | E | &4 IS-B cash flow generation failed & & |
318 | E | &4 System cannot process a type 1 cash flow disturbance |
319 | E | &4 System cannot process a type 1 cash flow disturbance |
320 | E | &4 Error when saving generated cash flows |
321 | E | &4 No authorization for & & |
322 | E | &4 Flow type not permitted for contract type & |
323 | E | &4 Enter a valid value using input help |
324 | E | &4 Position does not permit update using orders |
325 | E | &4 Position does not permit update using transactions |
326 | E | &4 Duplicate entries exist |
327 | E | &4 Following position cannot be costed using the rule & |
328 | E | &4 (& &) Pos. calc. indicator does not permit position generation/update |
329 | E | &4 (Position &, company code &) int. error occurred in locking process |
330 | E | &4 Data record for header must be an item |
331 | E | &4 For reversals, transfer one data record only |
332 | E | &4 Only one item is to be transfered when updating |
333 | E | Flow (& & & &) does not exist |
334 | E | Flow (& & & &) already exists |
335 | E | &4 OI read procedure is not consistent with the maturity pattern |
336 | E | &4 Error when determining costing key date |
337 | E | &4 Rate factors for translation from & to & on & not maintained |
338 | E | &4 Nominal amount must be transferred for percentage quotation |
339 | E | &4 Securities ID number & does not exist |
340 | E | &4 Additional company code data for & is not maintained |
341 | E | &4 Flow type & does not exist |
342 | E | &4 You must transfer the security price (PWKURS) |
343 | E | &4 Posting date, value date and order date were not transferred |
344 | E | Currency translation from & to & on & with rate category & not possible |
345 | E | &4 You must transfer the number of units in a unit quotation |
346 | E | &4 You must transfer the security price (KWKURS) |
347 | E | &4 Company code & does not exist |
348 | E | &4 For '&.&' no period values for record type E exist |
349 | E | &4 Currency unit & not maintained (Customizing) |
350 | E | &4 Costing sheet '&' is not assigned to valuation strategy '&' |
351 | E | &4 Settlement method for class & does not allow calculation |
352 | E | &4 No position exists for financial transaction |
353 | E | &4 Co. code &, loan &: Settlement and rollover no longer up-to-date |
354 | E | &4 Company code &: Period preceding & not found |
355 | E | &4 Company code &, loan &: Error when applying prepayment approach |
356 | E | &4 Co.code &, transaction &: Information about IS-B cash flow missing |
357 | E | &4 Co.code &, transaction &: Duration calculation failed |
358 | E | &4 Company code &, transaction &: Interest information is missing |
359 | E | &4 Yield curve & in currency & on & not found |
360 | E | &4 (Co.code &, trans. &) full waiver requires special treatment for IS-B |
361 | E | &4 Transaction has no valid status -> no costing |
362 | E | &4 Financial transaction reversed, no costing carried out |
363 | E | &4 (Co.code &, transaction &) cash flow cat. not allowed for trans. |
364 | E | &4 No payment flow exists for order |
365 | E | &4 System is unable to select a matching entry |
366 | E | &4 Profit center for non-interest-bearing-position &1 not maintained |
367 | E | &4 You can only display cash flow for securities |
368 | E | &4 G/L account of non-interest-bearing-position &1 not maintained |
369 | E | &4 System unable to read totals table for ledger &1 |
370 | E | &4 G/L accnt for non-int-bearing-pos. &1 is not contained in pos. items |
371 | E | &4 System unable to calculate effective interest rate |
372 | E | &4 System is unable to generate a cash flow for order (& &) |
373 | E | &4 System is unable to calculate effective interest for order (& &) |
374 | E | &4 Profit centers for non-int.-bearing-position &1 are not maintained |
375 | E | &4 Transaction does not have a valid status |
376 | E | &4 Trans. reversed or does not have 'contract' or 'settlement' status |
377 | E | &4 System unable to read totals table for ledger &1 |
378 | E | &4 Exchange not maintained for valuation |
379 | E | &4 Yield curve type & is not maintained in currency & |
380 | E | &4 Operating concern & is managed as a bank operating concern |
381 | E | &4 G/L account & for non-interest-bearing-position & is not permitted |
382 | E | &4 Profit center &1 for non-interest-bearing-position &2 is invalid |
383 | E | &4 Profit center group &1 for non-interest-bearing-position &2 is invalid |
384 | E | &4 Bank product &1 must not be deleted |
385 | E | &4 Position (securities position) cannot be locked |
386 | E | &4 Position (forex position) cannot be locked |
387 | E | &4 Position (stock ex. derivative) cannot be locked |
388 | E | &4 Specified business transaction event '&1' is not permitted here |
389 | E | &4 You can only use each time/date once |
390 | E | &4 Value field assignment is incorrect (&) |
391 | E | &4 First select the relevant line |
392 | E | &4 Data has already been saved |
393 | E | &4 Data is inconsistent |
394 | E | &4 Entry already exists |
395 | E | &4 Data is locked by user &1 |
396 | E | &4 Error in transport (transport attempt failed) |
397 | E | &4 Entry included in transport request |
398 | E | &4 Following fields are incorrectly maintained in the costing rule: |
399 | E | - &1 |
400 | E | &4 Corporate action & does not exist |
401 | E | &4 (Co. code: &1, trans. &2) does not have required contract type (&3) |
402 | E | &4 Enter a permissible number range |
403 | E | Enter a key date for the conversion |
404 | E | No log exists |
405 | E | The log could not be correctly output, display is not possible |
406 | E | Number of deleted logs: &1 |
407 | E | Conversion of contract currency started |
408 | E | Conversion completed with errors |
409 | E | Conversion successfully completed |
410 | E | &4 Contract type: &1 |
411 | E | Error when writing log |
412 | E | Conversion of contract currency ended with warnings |
413 | E | &4 Weighting period and adjustment frequency not complete |
414 | E | (Object &1, &2, &3, &4) EURO conversion failed or with warnings |
415 | E | Reset of contract currency started |
416 | E | Resetting of EURO conversion not possible |
417 | E | &4 System cannot insert item that does not have a master part |
418 | E | &4 Flow indicators for flow type & and contract type & are missing |
419 | E | Class & does not exist |
420 | E | Class & was not converted |
421 | E | Translation rate & to & on & with rate type & does not exist |
422 | E | Start account conversion |
423 | E | Start account conversion - reversal |
424 | E | End account conversion |
425 | E | End account conversion - reversal |
426 | E | Selected accounts not flagged |
427 | E | Translation rate from & to & rate type & to & does not exist |
428 | E | Inverse rate for currency pair (& &) on & cannot be determined |
429 | E | Account (& & &) was not converted or was already reversed |
430 | E | Error in translation from & to & on & with rate type & |
431 | E | Account (& & &) already converted |
432 | E | &4 (co. code &, transaction &, activity &): Interest flow not found |
433 | E | The following accounts were converted on the database: |
434 | E | Account : & & & |
435 | E | Start class conversion |
436 | E | Start class conversion - reversal |
437 | E | End class conversion |
438 | E | End class conversion - reversal |
439 | E | Error in conversion of position values from & to & on & with rate type & |
440 | E | Error in conversion of cash flows from & to & on & with rate type & |
441 | E | Following positions were converted in the database: |
442 | E | Position : & & & |
443 | E | Position (& & &) was not converted |
444 | E | Position (& & &) has the wrong currency |
445 | E | &4 Class & does not exist |
446 | E | &4 Procedure is not currently supported for listed derivatives |
447 | E | &4 System cannot post-process cash flow |
448 | E | &4 Specify the required cash flow |
449 | E | &4 Process template '&1' is not defined in contolling area '&2' |
450 | E | &4 Only one template can be assigned to a contolling area |
451 | E | &4 Additional flows can only be transferred in insert mode |
452 | E | &4 Company code &, transaction &: Average volume not calculated |
453 | E | &4 Company code &, transaction &: Transaction is not relevant |
454 | E | &4 First select a column |
455 | E | &4 &1 entries were selected |
456 | E | &4 Required/optional control not found |
457 | E | &4 Comapny code &, transaction &: Modification for disbursements |
458 | E | &4 Co.code &, trans. &: Loan is unsuitable for conversion to SAP Banking |
459 | E | &4 Co. code &, trans. &: Customizing for offsetting flows is incorrect |
460 | E | &4 Company code &, transaction &: Total of partial waivers is too big |
461 | E | &4 Information on financial object is inconsistent |
462 | E | Following accounts were converted in the test run: |
463 | E | Following positions were converted in the test run: |
464 | E | &4 Enter a permissible contract type |
465 | E | &4 Processing completed |
466 | E | &4 (Co.code &, transaction &): Transaction already converted |
467 | E | &4 SAP Banking: Forex position locked by user & |
468 | E | &4 SAP Banking: Securities position locked by user & |
469 | E | &4 SAP Banking: Position of stock exchange derivatives locked by user & |
470 | E | &4 SAP Banking: System error occured in lock management |
471 | E | &4 No conditions for OI weighted adjustment (transaction currency) |
472 | E | &4 No conditions for OI weighted adjustment (local currency) |
473 | E | &4 Interest rate not found in MCM table (curve & & for &) |
474 | E | &4 Company code &, transaction &, invalid conversion key date |
475 | E | &4 (Co. code &, transaction &) current condition header does not exist |
476 | E | &4 Unable to create table for process costs |
477 | E | &4 Choose at least one financial object type |
478 | E | &4 Internal error when writing to table & |
479 | E | &4 No update char. maintained in operating concern & (see long text) |
480 | E | &4 Bank account &1 from bank area &2 is not yet valid |
481 | E | &4 Bank account & in bank area & already closed |
482 | E | &4 Bank account & in bank area & has unreleased conditions |
483 | E | &4 Bank account & in bank area & has unreleased limits |
484 | E | &4 Bank account & in bank area & does not exist |
485 | E | &4 Bank account & in bank area & has unreleased condition groups |
486 | E | &4 No conditions exist for the commitment interest |
487 | E | &4 Class & already converted |
488 | E | &4 Currency of additional flow must be issue currency or settlement crcy |
489 | E | ( &1 &2 &3 &4 ) incorrect call (internal error) |
490 | E | ( &1 &2 &3 &4 ) transaction not in global memory (internal error) |
491 | E | &1 &2 &3 &4: Unable to insert disbursement |
492 | E | &1 &2 &3 &4: Unable to change disbursement |
493 | E | ( &1 &2 &3 &4 ) Entry does not exist (internal error) |
494 | E | &1 &2 &3 &4: You must not change the entry |
495 | E | &1 &2 &3 &4: Number assignment has failed |
496 | E | ( &1 &2 &3 &4 ) Maximum level number reached (internal error) |
497 | E | &4 Co. code &1, trans. &2: Processing is not possible |
498 | E | &4 Error while saving data |
499 | E | &1 &2 &3 &4: Unable to process the partial waiver |
500 | E | &1 &2 &3 &4: Condition type for capital decreases has not been assigned |
501 | E | &4 Number assignment for orders in company code & must be internal |
502 | E | &4 Flow type & not permitted |
503 | E | &4 Transfer a header with one item only |
504 | E | &4 SBEWARTAB must have cat.'SD'(trans.post.outflow) for tranfer postings |
505 | E | &4 SEBWARTZU must have cat.'AD'(trans.post.inflow) for transfer postings |
506 | E | &1 &2 &3 &4: No entries for deletion exist |
507 | E | &4 With stock split/swap, SBEWARTAB must have cat. 'SKM' (pos. outflow) |
508 | E | &4 With stock split/swap, SBEWARTZU must have cat. 'AKM' (pos. outflow) |
509 | E | &1 &2 &3 &4: Individual disbursement procedure is incorrect |
510 | E | &4 Maintain the swap or splitting ratio (ZAEHLER/NENNER) |
511 | E | ( &1 &2 &3 &4 ) Insertion not possible since entries already exist |
512 | E | ( &1 &2 &3 &4 ) Change not possible since no entries exist |
513 | E | &4 Transfer ID number of reference paper (REFRANL) |
514 | E | &4 Value date (DVALUT) is required in item |
515 | E | &4 Securities position & & & does not exist |
516 | E | Unable to determine position value on & (position & & &) |
517 | E | &4 Individual disbursement procedure is inconsistent |
518 | E | &4 For unit quotation you must enter the number of units (ASTUECK) |
519 | E | &4 Source position (& & &) is not sufficient |
520 | E | &4 You must enter the nominal amount (BNWHR) for percentage quotation |
521 | E | &4 Security account (& &) does not exist |
522 | E | &4 Invalid category of position change (&) |
523 | E | &4 Class & is not unit-quoted |
524 | E | &4 Class & does not exist |
525 | E | &4 Classes & and & must have the same issue currency |
526 | E | &4 Enter the costing date |
527 | E | &4 (Co.code &1, trans. &2) payment day and/or calculation day not entered |
528 | E | &4 (Co.code &1, trans. &2) Inclusive indicator is incorrect |
529 | E | &4 (Co. code &1, trans. &2) Month-end indicator is incorrect |
530 | E | &4 (Company code &1, transaction &2) Amount must be positive |
531 | E | &4 (Co.code &1, trans. &2) Currency not the same as the trans. currency |
532 | E | &4 (Co. code &1, trans. &2) Payment day not in current fixed int. period |
533 | E | &4 (Co. code &1, trans. &2) Entry exceeds disbursement obligation |
534 | E | &4 (Co. code &1, trans. &2) calculation day not entered or incorrect |
535 | E | &4 (Co.code &1, trans. &2) Calc. day not in current fixed interest period |
536 | E | &4 (Co.code &1, trans. &2) Entry for the same day already exists |
537 | E | &4 (Co.code &1, trans. &2) Rounding differences not corrected |
538 | E | &4 (Co.code &1, trans. &2) No entries for disbursement procedure |
539 | E | &4(Co.code &1, trans. &2) Total (&3) not equal to commitment capital (&4) |
540 | E | &4 (Co. code &1, trans. &2) Planned disbursement date incorrect |
541 | E | &4 (Co. code &1, trans. &2) Partial waivers cover committed capital |
542 | E | &4 (Company Code &1, Trans. &2) Amount to be disbursed cannot be negative |
543 | E | &4 External number of position change RBAENEXT not transferred |
544 | E | &4 Position change & already exists |
545 | E | &4 Position change & does not exist or was reversed |
546 | E | &4 All records for order/position change must have same mode |
547 | E | &4 Position date (DBESTAND) is required in item |
548 | E | &4 Enter a company code (BUKRS) |
549 | E | &4 Enter a class (RANL) |
550 | E | &4 Enter the securities account (RLDEPO) |
551 | E | &4 Specify the company code of the source position (BUKRSQ) |
552 | E | &4 Specify the securities account of the source position (RLDEPOQ) |
553 | E | &4 Specify the company code of the target position (BUKRSZ) |
554 | E | &4 Specify the securities account of the target position (RLDEPOZ) |
555 | E | &4 Specify the flow type (SBEWART) |
556 | E | &4 Specify a flow type for outflow (SBEWARTAB) |
557 | E | &4 Specify a flow type for inflow (SBEWARTZU) |
558 | E | &4 Specify the class of the source position (RANLQ) |
559 | E | &4 Specify the class of the target position (RANLZ) |
560 | E | &4 Cancellation indicator is invalid, allowed values are '0' and '1' |
561 | E | &4 Specify the period and the fiscal year |
562 | E | &4 Specify the costing key date |
563 | E | &4 Update mode is not valid for this position change |
564 | E | &4 Position change (&) can not be locked |
565 | E | &4 Error converting position change from & to & on & with ex.rte. type & |
566 | E | &4 (Operating concern: &1) Unable to determine period limits |
567 | E | &4 Unable to determine the end date for cash flow |
568 | E | &4 You cannot create 'residual flows' |
569 | E | &4 Acquis. val. not translated from & to & on & using exch. rate cat. & |
570 | E | &4 Position & permits no update |
571 | E | &4 Select a condition item |
572 | E | &4 Select a valid column (percentage rate or amount) |
573 | E | &4 System cannot reconcile data |
574 | E | &4 Enter either a percentage or an amount |
575 | E | &4 Field SZUABKNZ has to be '01' or '02' for markups/markdowns |
576 | E | &4 System cannot determine costing rule |
577 | E | &4 Costing rule & does not have transaction type 'node costing' |
578 | E | &4 Class & has to be either a subscription right or a warrant |
579 | E | &4 Reconciliation not possible for the chosen field |
580 | E | &4 Class & is not created as a warrant for underlying & |
581 | E | &4 Costing rule & is not valid |
582 | E | &4 Initial value can not be transferred to the required field |
583 | E | &4 Specify a number of units (ASTUECK) |
584 | E | &4 Select only one valuation alternative for each sequence |
585 | E | &4 System could not run database operation |
586 | E | &4 (Company code &1, transaction &2) invalid rollover removed |
587 | E | &4 An entry with the same key (&1, &2) already exists |
588 | E | &4 No transaction value maintained for transaction (& &) |
589 | E | &4 Market segment for evaluation type & and val. rule & not maintained |
590 | E | &4 Number/delivery date (DDISPO) has to be filled in the item |
591 | E | &4 Operating concern & has not yet been fully generated |
592 | E | &4 No reference rate maintained in financial object supplement |
593 | E | &4 Price has to be transferred for each subscription right (KWKURS) |
594 | E | &4 The 'from' period is after the 'to' period |
595 | E | &4 Class & cannot be changed to & |
596 | E | &4 Class & cannot be changed to class & |
597 | E | &4 Class & is not a convertible bond |
598 | E | &4 Position (& & &) is locked |
599 | E | &4 Position (& & &) can no longer be changed after & |
600 | E | SAP Banking: Start of conversion of variable transactions in update run |
601 | E | Variable transaction &1 in company code &2 has already been converted |
602 | E | SAP Banking: Start of conversion of variable transactions in test run |
603 | E | SAP Banking: End of conversion of variable transactions in test run |
604 | E | Variable transaction &1 in company code &2 converted |
605 | E | End of conversion of variable transactions in real run |
606 | E | None of the selected variable transactions have been flagged for EDT |
607 | E | Start of the reversal of converted variable transactions in real run |
608 | E | Variable transaction &1 in company code &2 has not yet been converted |
609 | E | Variable transaction &1 in company code &2 has already been reversed |
610 | E | Start of reversal of converted variable transaction in real run |
611 | E | End of reversal of converted variable transaction in real run |
612 | E | End of reversal of converted variable transaction in real run |
613 | E | &4 Position value for & (position & & &) does not permit update |
614 | E | &4 Cash flow could not be constructed |
615 | E | &4 Interest coupons in different currencies not yet supported |
616 | E | &4 System cannot determine costing rule for the transaction |
617 | E | &4 Specify either the contract number or the alternative number |
618 | E | &4 (Co.code &, transaction &) Type one cash flow disturbance is invalid |
619 | E | &4 Investment form & not supported for theoretical price determination |
620 | E | &4 Processing in test run - no database changes |
621 | E | &4 Processing in update run |
622 | E | &4 (Co. code &1, transaction &2 / &3) Processing successfully completed |
623 | E | &4 (Co.code &1, transaction &2 / &3) Processing contains errors |
624 | E | &4 Processing completed with result: &1 - &2 |
625 | E | &4 Costing key date (from) has to come before costing key date (to) |
626 | E | &4 No principal repayments were found |
627 | E | &4 Opportunity interest rate is less than zero |
628 | E | &4 Period (from) must come before period (to) |
629 | E | &4 Error in determining period dates |
630 | E | &4 Error while saving, processing terminated |
631 | E | &4 No calculation of opportunity using market volume for forex positions |
632 | E | BCA: Account &1 in bank area &2 with transaction differentiation &3 |
633 | E | Generic transaction (risk): Internal transaction number &1 |
634 | E | Variable transaction &1 in company code &2 converted |
635 | E | &4 Currency of variable transaction &1 in company code &2 is initial |
636 | E | Variable transaction &1 in company code &2 was reversed |
637 | E | Variable transaction &1 in company code &2 was reversed |
638 | E | &4 Closing date (DSCHLUSS) for the order is not filled |
639 | E | &4 Securities order (& &) transferred more than once |
640 | E | &4 (Co. code &1, trans. &2) Customizing for Fin. trans. type is incorrect |
641 | E | &4 (Co. code &1, transaction &2) no relevant activity exists |
642 | E | &4 Reverse function only supported during selection of key dates |
643 | E | &4 Reverse function only possible in update run |
644 | E | &4 Transaction type does not exist |
645 | E | &4 Transaction direction does not exist |
646 | E | &4 Unable to transfer customer interest in planning for volume costing |
647 | E | &4 Only one transaction direction can be assigned to transaction type &1 |
648 | E | &4 No transaction direction is assigned to transaction type &1 |
649 | E | &4 Flow type does not exist |
650 | E | &4 Calculation category does not exist |
651 | E | &4 Transaction direction &1 is not assigned to transaction type &2 |
652 | E | &4 Description of transaction type &1 not maintained in language &2 |
653 | E | &4 Name of transaction direction &1 does not exist in language &2 |
654 | E | &4 Description of flow type &1 does not exist in language &2 |
655 | E | &4 No flow type is assigned to transaction type &1 |
656 | E | &4 System cannot determine interest rate adjustment dates |
657 | E | &4 Forward rate for reference & and fixing data & was not calculated |
658 | E | &4 No interest rate maintained for reference & on & |
659 | E | &4 Cash flow (category &1, date &2): Eff. interest rate not calculated |
660 | E | &4 &1 succsessfully costed |
661 | E | &4 Bank acct &1 in bank area &2 is part of an int. compensation hierarchy |
662 | E | &4 Medium term (weighted repayments) less than or equal to zero |
663 | E | &4 Key fields must be 'ready for entry' (required or optional field) |
664 | E | Variable transaction &1 in company code &2 |
665 | E | &4 Detail log for foreign currency entered is not supported |
666 | E | &4 Do not enter data in field &1 |
667 | E | &4 Class & & |
668 | E | &4 Field ROLE is a required entry field for loan RANLALT1- &1, BUKRS- &2 |
669 | E | &4 Role - &1 is not maintained |
670 | E | &4 Assign role &1 to role category &2 or &3 |
671 | E | &4 Class & warrant: System cannot find class data |
672 | E | &4 Exercise warrant: Class & not completely maintained |
673 | E | &4 Class & subscription right: System cannot find class data |
674 | E | &4 Exercise subscription right: Class & not fully maintained |
675 | E | &4 Class & stock swap: System cannot find class data |
676 | E | &4 Stock swap: Class & not fully maintained |
677 | E | &4 Class & convertible bond: System cannot find class data |
678 | E | &4 Conversion: Class & not fully maintained |
679 | E | &4 System does not support class & exercise with cash settlement |
680 | E | &4 Class & must be subscription right for stock |
681 | E | &4 Position change &. Value of put warrants is greater than base value |
682 | E | &4 Evaluation strategy '&1' is used twice |
683 | E | &4 Select a log type |
684 | E | &4 Financial object integration: Customizing settings not available |
685 | E | &4 Choose a selection characteristic with data element PRCTR |
686 | E | &4 Enter a valid transaction type |
687 | E | &4 Choose only permitted profit centres in the selection parameters |
688 | E | &4 Select a permitted value field for the operating concern |
689 | E | &4 Choose a permitted target profit center |
690 | E | &4 Choose a permitted cost element from the current chart of accounts &2 |
691 | E | &4 Choose a valid controlling area |
692 | E | &4 Maintain value fields/cost element assignment for controlling area &1 |
693 | E | &4 Field &1 does not belong to the category 'currency amount' |
694 | E | &4 Int. error: Field &1 in op. concern assignment but not in field cat. |
695 | E | &4 Field &1 does not belong to the category 'base key figure' |
696 | E | &4 You have not yet assigned a chart of accounts to controlling area &1 |
697 | E | &4 Target profit center & must not be in the selection set of the sender |
698 | E | Internal mistake in view maintenance for V_JBDFTPASSIGNM (RC-&1) |
699 | E | You do not have authorization for view maintenance of V_JBDFTPASSIGNM |
700 | E | &4 & is not a valid characteristic |
701 | E | &4 No transaction start date was specified |
702 | E | &4 No transaction end date was specified |
703 | E | &4 Markups and markdowns result in a negative opportunity interest rate |
704 | E | &4Invalid condition header for the determination of interest calc. method |
705 | E | &4 Interest calculation method 'actW/252' not supported in SEM Banking |
706 | E | &4 System could not determine profitability segment number |
707 | E | &4 You have not selected any data |
708 | E | &4 Maximum security price (PWKURS) - 999.999999 |
709 | E | &4 Order (& &) already exists. Mode field set to 'U' (Update) |
710 | E | &4 View/Table is locked by another user |
711 | E | No maintenance authorization for V_JBDFTPASSIGNM. Only display possible |
712 | E | &4 You must specify at least one valid sender profit center |
713 | E | &4 Order (& &) does not exist yet, mode field set to 'I' (Insert) |
714 | E | &4 You do not have the authorization to execute CO-transaction &1 |
715 | E | &4 No values for posting &1 (content zero) in Profit Center &2 |
716 | E | &4 No data selected for this profit center |
717 | E | &4 No document to be reversed for year, period &1 |
718 | E | &4 Field '&' (&) must be initial or equal to issue currency (&) |
719 | E | &4 If you change the master part you must specify the borrower |
720 | E | &4 System cannot update of profit center invoice for &1 |
721 | E | &4 No permitted cost elements in chart of accounts &1 for CO area &2 |
722 | E | &4 No valid assignmnt of val. field to cost element defined in CO area &1 |
723 | E | &4 No permitted category for cost element &1 |
724 | E | Start of conversion of table JBDKKOF in update run |
725 | E | Start of conversion of table JBDKKOF in test run |
726 | E | The table JBDKKOF contains no entries |
727 | E | End of conversion of table JBDKKOF in update run |
728 | E | End of conversion of table JBDKKOF in test run |
729 | E | The entries in JBDKKOF applicable to object number &1 are converted |
730 | E | The entries in JBDKKOF applicable to object number &1 are not converted |
731 | E | &4 Internal errors in authorization check K_VRGNG |
732 | E | &4 Business partner with ext. partner number & does not exist |
733 | E | &4 Calculated average interest rate is too big |
734 | E | &4 Value date-based FLA and security price for & not found |
735 | E | &4 Security class & is not active |
736 | E | &4 Internal number assigment must be valid for number range used |
737 | E | &4 System cannot find flows for cash flow &1 |
738 | E | &4 Data inconsistency in period &1 |
739 | E | &4 Costing for transaction &1 &2 contains errors |
740 | E | &4 Costing for transaction &2 &3 is no longer possible |
741 | E | &4 System cannot find BCA accrual/deferral before period start &1 |
742 | E | &4 System cannot find BCA accrual/deferral for costing key date &1 |
743 | E | &4 Internal error, input parameters are incorrect |
744 | E | &4 Charges and commission were transferred twice |
745 | E | &4 Internal Error |
750 | E | &4 You can no longer maintain cash flows |
751 | E | &4 Table name &1 is invalid |
752 | E | &4 No authorization to delete tables /1ISB/COA* |
760 | E | &4No SEM-active CFM valuation area has been assigned to accounting code & |
773 | E | &4 Template not clearly assigned for controlling area & |
774 | E | &4 Operating concern not clearly assigned to template & |
775 | E | &4 Specify a transaction differentation |
776 | E | &4 Specify a value for the substring |
777 | E | &4 Start position of substring is greater than end position |
778 | E | &4 Derivation rules for preliminary costing must be converted |
780 | E | Tranche parameterization is missing from costing rule '&1' |
781 | E | Fill the '&1' field |
782 | E | Either fill both the '&1' and the '&2' field or leave them empty |
783 | E | If the yield curve type has been filled, you must fill in the field '&1' |
784 | E | Fill only one of the '&1' and '&2' fields |
785 | E | You must fill in the field '&1' because of the data you have selected |
786 | E | You must leave the '&1' field empty if the yield curve type is empty |
787 | E | Fill the 'Step Range' field as well as the 'Start' and 'End' fields |
788 | E | Start date must be earlier or the same as the end date |
789 | E | Tranche &1 from costing rule '&2' contains the following errors: |
790 | E | Costing rule '&2' contains the following errors: |
791 | E | You have not selected a tranche that is relevant to interest method |
792 | E | You have selected multiple tranches as relevant to the interest method |
793 | E | System cannot find any active Business Add-In implementation |
794 | E | Reference interest rate &1 has either not been defined or is incomplete |
795 | E | Date for start of adjustment is zero |
796 | E | Fixed interest rate and yield curve or reference interest rate specified |
797 | E | You have not specified interest cal. method for fixed interest rate |
800 | E | &4 &1 key entries for transaction &2 have been changed |