This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.
Check it out on amazon.com →The Message Class M5 (LIS: Standardanalysen, BCO-Belegauswertungen) is a standard Message Class in SAP ERP and is part of the package MCR.
Message Class | M5 |
Short Text | LIS: Standardanalysen, BCO-Belegauswertungen |
Package | MCR |
ID | Language | Text |
---|---|---|
001 | D | Standardaufriß nicht möglich |
002 | D | Ende des Standardaufrisses erreicht |
003 | D | Aufriß & wurde schon durchgeführt |
004 | D | Die Selektionsversion & wurde gelöscht |
005 | D | Aufriß nur auf Merkmalswert möglich |
006 | D | Selektionsversion & wurde gesichert |
007 | D | Fehler beim Sichern von Selektionsversion & |
008 | D | Keine Berechtigung für Info-Struktur & |
009 | D | Bitte Cursor auf eine Kennzahlenspalte positionieren |
010 | D | Bitte Spaltenbreite zwischen & und & eingeben |
011 | D | Kennzahl &-& nicht definiert |
012 | D | Kennzahlen sind nicht voreingestellt |
013 | D | Version & nicht vorhanden |
014 | D | Bitte Anzahl größer als 0 eingeben |
015 | D | Kennzahl & ist nicht definiert |
016 | D | Bitte Cursor auf numerische Kennzahl positionieren |
017 | D | Keine Daten zur gewählten Selektion vorhanden |
018 | D | Keine Selektionsversion mit gesicherten Daten vorhanden |
019 | D | Keine Versionen zur Info-Struktur & vorhanden |
020 | D | Die Währungen sind verschieden. Bitte wählen Sie eine Analysewährung. |
021 | D | Die Mengeneinheiten sind verschieden - Funktion ohne Einheitenbezug |
022 | D | Umrechnung von &2 in &1 zum Kurstyp &3 zum &4 nicht möglich |
023 | D | Die Einheiten sind verschieden. Grafikanzeige erfolgt ohne Einheitenbezug |
024 | D | Bitte Cursor auf Merkmalswert positionieren |
025 | D | Für & existiert keine Voreinstellung. Standardwerte wurden übernommen |
026 | D | Voreingestellte Parameter & wurden geändert |
027 | D | Es wurden keine Veränderungen vorgenommen |
028 | D | Voreinstellung der Kennzahlen für & wurde gelöscht |
029 | D | Selektionsversion & nicht vorhanden (Bitte Eingabe prüfen) |
030 | D | Voreinstellung der Kennzahlen für & wurde gesichert |
031 | D | Der Datensatz ist durch einen anderen Benutzer gesperrt |
032 | D | Datensatz konnte wegen eines Systemfehlers nicht gesperrt werden |
033 | D | Die Standardeinstellung darf nicht gelöscht werden |
034 | D | Info-Struktur & enthält bereits Ist-Daten. Periodenänderung nicht möglich |
035 | D | Standardeinstellung ist nicht vorhanden |
036 | D | Zur Info-Struktur existiert keine Standardanalyse |
037 | D | Es wurden keine Info-Strukturen gefunden |
038 | D | Standardeinstellung ist nicht vorhanden |
039 | D | Bitte genau ein Feld auswählen |
040 | D | Verarbeitung nicht möglich (Bitte Verantwortlichen verständigen) |
041 | D | Verarbeitung nicht möglich (Bitte Verantwortlichen verständigen) |
042 | D | Verarbeitung nicht möglich (Bitte Verantwortlichen verständigen) |
043 | D | Fortschreibungseinstellung wurde gesichert |
044 | D | Bitte Cursor auf eine Info-Struktur positionieren |
045 | D | Verarbeitung nicht möglich (Bitte Verantwortlichen verständigen) |
046 | D | Der Benutzer & ist nicht vorhanden |
047 | D | Bitte geben Sie eine Formel ein |
048 | D | Bitte geben Sie eine Methode ein |
049 | D | Spaltenbreite wurde an Ausgabelänge angepaßt |
050 | D | Blättern nicht möglich: letzte Spalte erreicht |
051 | D | Blättern nicht möglich: erste Spalte erreicht |
052 | D | Analysedaten wurden aktualisiert |
053 | D | Verarbeitung nicht möglich (Bitte Verantwortlichen verständigen) |
054 | D | Bitte Cursor auf eines der Felder positionieren |
055 | D | Aktion bitte nochmals ausführen |
056 | D | Objekte wurden zur Korrektur & hinzugefügt |
057 | D | Daten von Version & wurden gelesen |
058 | D | Fehler bei der Tabelleneinstellung |
059 | D | Die Fortschreibung muß im Zielsystem bzw. -mandanten neu eingest. werden |
060 | D | Der Name ist nicht für SAP reserviert. |
061 | D | Zu der Applikation existieren Feldkataloge. Das Löschen ist verboten. |
062 | D | Zu der Applikation existieren Info-Strukturen. Das Löschen ist verboten. |
063 | D | Zur Info-Struktur & existiert im Mandt. & kein Eintrag in Tabelle TMC2Q |
064 | D | Sie haben keine Berechtigung für das LIB-Customizing |
065 | D | Geschäftsjahresvariante nur bei buchungsperiodenw. Fortschr. zuordnen |
066 | D | Sie haben keine Berechtigung zur Anzeige der Version & |
067 | D | Spaltenbreiten sind zu groß und / oder zu viele Kennzahlen ausgewählt |
068 | D | Die Standardeinstellungen wurden gesichert |
069 | D | Die Einstellungen für den Benutzer & wurden gesichert |
070 | D | Die Applikationen wurden gesichert |
071 | D | Fehler beim Sichern der Applikationen |
072 | D | Bitte Applikation zwischen & und & eingeben |
073 | D | Bitte Applikation nicht zwischen & und & eingeben (Kundenbereich) |
074 | D | Die Applikationsnummer ist bereits vergeben |
075 | D | Bitte Cursor auf eine der Applikationen positionieren |
076 | D | XXL-Funktion nicht möglich - errechnete Kennzahl & wurde ausgewählt |
077 | D | Daten wurden an XXL übergeben |
078 | D | Zeitstempel wurden zurückgesetzt |
079 | D | XXL-Funktion nicht möglich |
080 | D | Die ausgewählten Selektionsversionen wurden gelöscht |
081 | D | Bitte Cursor auf gültige Zeile stellen |
082 | D | Das angeforderte Objekt ist im Moment gesperrt |
083 | D | Das angeforderte Objekt ist im Moment gesperrt |
084 | D | Die Einstellungen für den Benutzer & wurden gelöscht |
085 | D | Fehler beim Lesen der Tabelle & aus dem Dictionary |
086 | D | Die Applikation ist eine SAP-Applikation und darf nicht geändert werden |
087 | D | Die Applikation ist eine SAP-Applikation und darf nicht gelöscht werden |
088 | D | Kein Kennzahlenvergleich für & möglich |
089 | D | Bitte mindestens eine Standardapplikation auswählen |
090 | D | Sie haben keine Berechtigung StrdEinst. für die Appl. & vorzunehmen |
091 | D | Funktion 'Alle Kennzahlen' nur auf Merkmals- oder Summenzeile möglich |
092 | D | Es sind noch keine Kunden-Applikationen definiert |
093 | D | Die Pflege der Applikationen ist im Moment gesperrt. Nur Anzeige möglich. |
094 | D | Angefordertes Objekt ist im Moment gesperrt durch Benutzer & |
095 | D | Sie haben nicht für alle angeforderten Kennzahlen Berechtigungen |
096 | D | Sie haben für keine Kennzahl der Analyse eine Berechtigung |
097 | D | Fehler >&< beim Senden der Analyse aufgetreten |
098 | D | Einstellungen werden aus der Exception übernommen |
099 | D | Aufriß nicht mögl., da dieser Hierarchieknoten bereits aufgerissen wurde |
100 | D | Sie haben für keine der angeforderten Kennzahlen eine Berechtigung. |
101 | D | Es ist noch keine Datenanreicherungsmethode & angelegt |
102 | D | Die Methode & ist nicht für Info-Struktur & anwendbar (F4) |
103 | D | Es ist noch keine Listenmethode & angelegt |
104 | D | Das in der Methode & angegebene Programm & hat Syntaxfehler |
105 | D | Die Basismethode & wird nicht ausgeführt |
106 | D | Die Listenmethode & wird nicht ausgeführt |
107 | D | Aktion & wurde abgebrochen |
108 | D | Sie haben keine Berechtigung zum Löschen aller markierten Selektionsvers. |
109 | D | Die Info-Struktur gehört zur Applikation & (&) |
110 | D | Sie haben keine Berechtigung zum Löschen der Selektionsversion &3 |
111 | D | Fehler >&< beim Aufruf der Analyse aufgetreten |
112 | D | Fehler Nr. >&< beim Konvertieren der Analyseliste aufgetreten |
113 | D | Es ist noch keine Formel & angelegt |
114 | D | Zurücksetzen auf Originalbreite nicht möglich, da Zeile zu lang wird. |
115 | D | Zeilenlänge wird zu groß. Bitte Spaltenbreite kleiner als & wählen. |
116 | D | Es konnten nicht alle markierten Selektionsversionen gelöscht werden |
117 | D | Sie haben keine Berechtigung zum Löschen der Variante & & & |
118 | D | Die Variante & & & ist zur Zeit gesperrt |
119 | D | Die Variante & & & ist geschützt |
120 | D | Selektionsversion & wurde inzwischen gelöscht. Starte Neuselektion. |
121 | D | Fehler Nr. & beim Analyse-Aufruf aus SAPOffice in Programm & aufgetreten |
122 | D | Parameter zum funktionalen Analyseaufruf aus SAPOffice nicht ermittelbar |
123 | D | Selektionsversion kann nicht eingeplant werden (Gesichert aus StdAnalyse) |
124 | D | Selektionsversion & wurde gesichert |
125 | D | Bitte weniger Kennzahlen oder eine kleinere Spaltenbreite wählen. |
126 | D | Selektionsversion & wurde gelöscht |
127 | D | Berechtigung fehlt, um alle Daten der Selektionsversion anzuzeigen. |
128 | D | Für die Info-Struktur & können keine Selektionsversionen angelegt werden |
129 | D | Info-Struktur & nicht zugelassen |
130 | D | Selektionsversion & ist bereits vorhanden (Bitte Eingabe prüfen) |
131 | D | Selektionsversion & kann nicht überschrieben werden |
132 | D | Bitte wählen Sie Merkmale und Kennzahlen aus |
133 | D | Keine Selektionsversion zur gewählten Selektion vorhanden |
134 | D | Selektionsversion & gehört nicht zur Applikation & |
135 | D | Zur Selektionsversion & existiert kein Auswertereport |
136 | D | Variante & zur Selektionsversion & existiert bereits |
137 | D | Keine Variante für Selektionsversion & vorhanden |
138 | D | Selektionsversion & durch anderen Benutzer gesperrt |
139 | D | Systemprobleme beim Sperren der Selektionsversion & |
140 | D | Löschen nicht möglich - Bitte löschen Sie zuerst die Variante |
141 | D | Variante für Selektionsversion & wurde gelöscht |
142 | D | Hintergrund-Job für Selektionsversion & erfolgreich eingeplant |
143 | D | Zur SelektVers. & existieren bereits noch nicht abgeschlossene Analysen |
144 | D | Zur Selektionsversion & keine Einträge gefunden |
145 | D | Bitte Selektionsversion eingeben, die mit 'A' bis 'Z' beginnt |
146 | D | Selektionsversion kann nicht geändert werden (Gesichert aus StdAnalyse) |
147 | D | Sie haben keine Berechtigung zum Anlegen der Selektionsversion & |
148 | D | Variante für Selektionsversion & wurde geändert |
149 | D | Version & enthält Kennzahlen, für die keine Berechtigung vorliegt |
150 | D | Sie haben keine Berechtigung zum Ändern der Selektionsversion & |
151 | D | Positionieren Sie den Cursor auf einem anzeigbaren Blatt |
152 | D | Keine Portfolio-Grafik bei einer Ausprägung |
153 | D | Beide Kennzahlen mit jeweils identischen Werten: keine Portfolio-Grafik |
154 | D | Kennzahl & mit identischen Werten: keine Portfolio-Grafik |
155 | D | Keine Selektionsversion gefunden |
156 | D | Positionieren Sie den Cursor auf einer Selektionsversion |
157 | D | Positionieren Sie den Cursor auf einer Selektionsversion oder Grundliste |
158 | D | Die Variante ist nicht mehr vorhanden |
159 | D | Sie haben keine Berechtigung zum Anzeigen der Selektionsversion & |
160 | D | Sie haben keine Berechtigung zum Einplanen der Selektionsversion & |
161 | D | Selektionsversion enthält keine Daten |
162 | D | Positionieren Sie bitte den Cursor auf eine Selektionsversion |
163 | D | Die Hierarchie enthält Mehrfachzuordungen |
164 | D | Ihre Benutzereinstellungen wurden gesichert |
165 | D | Positionieren Sie den Cursor auf einer Selektionsversion |
166 | D | Die Selektionsversion & wurde gelöscht. |
167 | D | Blättern nicht möglich: letzte Periode erreicht |
168 | D | Blättern nicht möglich: erste Periode erreicht |
169 | D | Merkmal muß wegen Merkmalskettung markiert werden: & & & & |
170 | D | Analysen zu SAP-Info-Strukturen können nur über das Menü gerufen werden |
171 | D | Es wurde der MCS-Parameter gesetzt |
172 | D | Es sind nur merkmalsähnliche Kennzahlen in der Grundliste vorhanden. |
173 | D | Die dynamische Berechnung des Analysezeitraums ist nicht aktiviert! |
174 | D | Das Merkmal &1 ist nicht auswählbar! |
175 | D | Für das Merkmal <&1>(&2) können keine Bezeichnungen gefunden werden. |
176 | D | Für Buchungskreis & keine Werke gefunden |
178 | D | Achtung: Daten gegebenenfalls nicht aktuell ---> Langtext |
180 | D | Gewählte Kennzahl & in XXL-Ausgabestruktur nicht enthalten |
181 | D | TEST Warning Feld & |
190 | D | Bitte positionieren Sie den Cursor auf einen Knoten |
191 | D | Sie haben keine Berechtigung zum Bearbeiten von Selektionsversionen |
192 | D | Sie haben keine Berechtigung zum Anlegen von Selektionsversionen |
200 | D | Bitte nur ein Analyse-Objekt wählen |
201 | D | Bitte ein Analyse-Objekt wählen |
202 | D | Bitte Analyse-Zeitraum angeben |
203 | D | Analyse-Zeitraum: Beginn liegt nach Ende |
204 | D | Analyse-Zeitraum: Ende liegt in Zukunft |
205 | D | Bitte benennen Sie das Analyse-Objekt |
206 | D | Verkaufsorganisation & nicht in Tab. TVKO |
207 | D | Inkonsistenz zwischen Tab. T024E und Tab. T001 |
208 | D | Einkaufsorganisation & nicht in Tab. T024E |
209 | D | Geschäftsbereich & nicht in Tab. TGSB |
210 | D | Werk & nicht in Tab. T001W |
211 | D | Inkonsistenz zwischen Tab. T001W und Tab. T001K |
212 | D | Inkonsistenz zwischen Tab. T001K und Tab. T001 |
213 | D | Sparte & nicht gepflegt |
214 | D | Materialart & nicht gepflegt |
215 | D | Warengruppe & nicht gepflegt |
216 | D | Kein gültiges Objekt ausgewählt |
217 | D | Bitte eine Periodizität auswählen |
218 | D | Bitte nur eine Periodizität auswählen |
219 | D | Einkäufergruppe & nicht gepflegt |
220 | D | Währung & nicht gepflegt |
221 | D | Dispomerkmal & nicht gepflegt |
222 | D | Bitte Analyse-Währung eingeben |
223 | D | Disponent & im Werk & nicht gepflegt |
225 | D | Lagerort & im Werk & nicht gepflegt |
226 | D | Tab. TVKWZ für Verkaufsorganisation & nicht gepflegt |
227 | D | Tab. T024E für Einkaufsorganisation & nicht gepflegt |
228 | D | Inkonsistenz Tab. T001W / T001K für Werk & |
229 | D | Inkonsistenz Tab. T001K / T001 für Werk & |
230 | D | Werke des Analyse-Objektes in T001W nicht gepflegt |
231 | D | Werk & (MARC-Segment gefunden) nicht in Tab. T001W |
232 | D | Tab. TCUR für Umrechnung & & nicht gepflegt |
233 | D | Tab. T134G für Geschäftsbereich & nicht gepflegt. |
234 | D | Sparte & nicht im Geschäftsbereich & (T134G) |
235 | D | Keine stat. Materialbewegungen für &. |
236 | D | Bitte Kennzahl-Bereich einschränken |
237 | D | Untergrenze größer Obergrenze |
238 | D | Bitte Anzahl Materialien angeben |
239 | D | Bitte Cursor auf Materialzeile positionieren |
240 | D | Keine Materialien in dieser Klasse |
241 | D | Keine Materialien selektiert |
242 | D | Bitte wählen Sie ein Histogramm aus |
243 | D | Bitte wählen Sie nur ein Histogramm aus |
244 | D | Keine Materialien in diesem Segment |
245 | D | Bitte wählen Sie ein Vergleichsobjekt aus |
246 | D | Bitte wählen Sie nur ein Vergleichsobjekt aus |
247 | D | Bitte zuerst Programm RMCFNE22 im Hintergrund ausführen |
250 | D | Die Kennzahl <&1> kann nur als Prozentwert dargestellt werden! |
251 | D | Die Kennzahl <&1> kann nicht als Prozentwert dargestellt werden! |
252 | D | Eine weitere Einschränkung wird für dieses Merkmale nicht unterstützt. |
253 | D | Bitte schränken Sie Ihre Auswahl auf höchsten &1 Werte ein! |
254 | D | Ihre Auswahl entspricht keiner Untermenge der vorhandenen Merkmalswerte. |
280 | D | Achtung: Info-Strukturen S025 und S225 für Serienfertigung aktiv |
281 | D | Achtung: Info-Strukturen S026 und S226 für Serienfertigung aktiv |
282 | D | Achtung: Info-Strukturen S027 und S227 für Serienfertigung aktiv |
283 | D | Weder Informationsstruktur S025 noch S225 wird fortgeschrieben |
284 | D | Weder Info-Struktur S026 noch S226 ist für die Serienfertigung aktiv |
285 | D | Weder Info-Struktur S027 noch S227 ist für die Serienfertigung aktiv |
290 | D | Ändern der Fortschreibungsart wegen offener V3-Verbuchungen nicht möglich |
291 | D | Änderung der Fortschreibungsart auf/von V3-Verbuchung! --> Langtext |
292 | D | Deaktivierung wegen offener V3-Verbuchungen problematisch! --> Langtext |
293 | D | Aktivierung wegen offener V3-Verbuchungen problematisch! --> Langtext |
300 | D | Funktion ab morgen verfügbar |
301 | D | Verdichtung nach & nur bei Analyse-Objekt Werk |
303 | D | Anzahl der Merkmalskettungen > 3 (interner Fehler) |
304 | D | Interner Fehler (Falscher Eintrag in Tabelle TMC7K für &1 &2) |
350 | D | Die Summe der Parameter muß 100 betragen |
351 | D | Bitte mindestens 2 Parameter eingeben |
352 | D | Parameter für A-Segment muß größer als für B-Segment sein |
353 | D | Parameter für A-Segment muß kleiner als für B-Segment sein |
354 | D | Gesamtzahl der Objekte ist zu hoch |
355 | D | Gesamtzahl der Objekte ist zu niedrig |
356 | D | Bitte wählen Sie eine gültige Strategie aus |
357 | D | Bitte wählen Sie eine Strategie aus |
358 | D | Bitte wählen Sie nur eine Strategie |
359 | D | Bitte wählen Sie ein gültiges Feld aus |
360 | D | Bitte wählen Sie nur ein Feld aus |
361 | D | Bitte geben Sie die Obergrenzen in aufsteigender Reihenfolge an |
362 | D | Bitte geben Sie alle Obergrenzen an |
363 | D | Bitte wählen Sie mindestens eine Aktion aus |
364 | D | Es werden nur die ersten 2000 Werte angezeigt |
365 | D | Für Werk & kein Buchungskreis gefunden |
366 | D | Für Werk & keine Währung gefunden |
367 | D | Keine Werke selektiert |
368 | D | Keine Materialien selektiert |
369 | D | Es wurden & Datensätze verbucht |
370 | D | Vorrat |
380 | D | Keine Bewegungen gefunden |
381 | D | Keine Umrechnung moeglich |
382 | D | Detailinfos nur bei eindeutiger Geschäftsjahresvariante möglich |
383 | D | Beleg kann nicht angezeigt werden |
384 | D | Keine passende allgemeine Hierarchie zur Selektion vorhanden |
385 | D | Merkmalswerte wurden in das Selektionsbild übernommen |
390 | D | Bitte wählen Sie zur Verbundselektion mehr als ein Material aus. |
391 | D | Falsche Selektionsoptionen für Verbundselektion Material |
399 | D | Keine Auswahl auf dem Selektionsbild. |
400 | D | ****** 400-599 vorläufig reserviert für VIS ***************************** |
401 | D | Generische Eingabe nur für den kompletten Vertriebsbereich erlaubt |
600 | D | ****** 600-699 vorläufig reserviert für EKS ***************************** |
700 | D | ****** 700-799 vorläufig reserviert für BCO ***************************** |
701 | D | Technische Information: Datenbankindex sinnvoll |
702 | D | ACHTUNG! Die Daten der Version & werden gelöscht. |
703 | D | Bitte wählen Sie mindestens eine Infostruktur aus. |
704 | D | Nur Infostrukur(en) für Bewegungen selektiert |
705 | D | Nur Infostruktur(en) für Bestände selektiert |
706 | D | Die Einplanung des Programms & als Hintergrundjob & ist fehlgeschlagen |
707 | D | Löschen Phase 1 gestartet |
708 | D | Verbuchungsfreie Zeit erforderlich. |
709 | D | Löschen Phase 2 gestartet |
710 | D | Ende der verbuchungsfreien Zeit |
711 | D | Statistikdatenneuaufbau erfolgreich beendet. |
712 | D | Statistikdatenneuaufbau wegen eines Fehlers abgebrochen. |
713 | D | Die gewählte Selektionsoption kann nicht ausgewertet werden. |
714 | D | Verarbeitung gestoppt. Belegtabellen können nicht gesperrt werden. |
715 | D | Mehrfachselektion per Beleg => kein Wiederaufsetzen möglich |
800 | D | Das Objekt existiert bereits mit Original im & |
801 | D | Das Objekt wird nur angezeigt |
802 | D | Die Bearbeitung wird abgebrochen |
803 | D | Beim Schreiben in die Korrektur trat ein Fehler auf |
804 | D | Transportwesen: Kein Anlegen /Ändern von Info-Strukturen möglich |
805 | D | Die Entwicklungsklasse existiert nicht |
850 | D | ** 850-899 vorläufig reserviert für Allgem. Hierarchie/OIW InfoKatalog ** |
851 | D | Kunden-OIW-InfoKatalog noch nicht vorhanden |
852 | D | Kunden-OIW-InfoKatalog existiert bereits |
853 | D | StdInfoKatalog im Kundensystem nicht pflegbar |
854 | D | OIW-Infokatalog inkonsistent |
855 | D | Ändern nur in Originalsprache möglich |
856 | D | Der OIW-Infokatalog ist im Moment gesperrt durch Benutzer & |
857 | D | An OIW Objekte können keine weiteren OIW Objekte angehängt werden |
859 | D | Der OIW-Infokatalog ist fehlerhaft |
860 | D | Nur Anzeige möglich, da die Berechtigung zum Pflegen fehlt |
861 | D | Kunden-OIW-Infokatalog existiert nicht, keine Berechtigung zum Pflegen |
862 | D | Keine Berechtigung zum Anzeigen oder Pflegen des OIW-Infokataloges |
869 | D | Fehler bei der Periodenermittlung |
001 | E | Standard drill-down not possible |
002 | E | End of standard breakdown reached |
003 | E | Breakdown & already performed |
004 | E | Selection version & deleted |
005 | E | Drill-down only possible on characteristic value |
006 | E | Selection version & saved |
007 | E | Error saving version & |
008 | E | No authorization for info structure & |
009 | E | Position cursor on key figure column |
010 | E | Enter column width between & and & |
011 | E | Key figure &-& not defined |
012 | E | Key figures not predefined |
013 | E | Version & does not exist |
014 | E | Enter a number greater than 0 |
015 | E | Key figure & is not defined |
016 | E | Place cursor on numerical key figure |
017 | E | No data exists for chosen selection |
018 | E | No selection version exists with saved data |
019 | E | No versions for info structure & exist |
020 | E | Different currencies - choose analysis currency |
021 | E | Units are different - function will be performed w/o reference to units |
022 | E | Impossible to convert currency &2 to &1 for exchange rate type &3 for &4 |
023 | E | Units are different - graph will be displayed w/o reference to units |
024 | E | Place cursor on characteristic value |
025 | E | No setting exists for &, default values were copied |
026 | E | Predefined parameters & have been changed |
027 | E | No changes were made |
028 | E | Key figure setting for & has been deleted |
029 | E | Selection version & does not exist (please check entry) |
030 | E | Key figure setting for & has been saved |
031 | E | Record locked by another user |
032 | E | Record could not be locked because of a system error |
033 | E | Default setting may not be deleted |
034 | E | Info structure & contains actual data, not possible to change time unit |
035 | E | Standard setting does not exist |
036 | E | No standard analysis exists for info structure |
037 | E | No info structure was found |
038 | E | Standard setting does not exist |
039 | E | Choose o n e field |
040 | E | Processing not possible (contact your systems administrator) |
041 | E | Processing not possible (contact your systems administrator) |
042 | E | Processing not possible (contact your systems administrator) |
043 | E | Update setting has been saved |
044 | E | Position cursor on an info structure |
045 | E | Processing not possible (contact your systems administrator) |
046 | E | User & does not exist |
047 | E | Enter a formula |
048 | E | Enter a method |
049 | E | Column width adjusted to output length |
050 | E | Scrolling not possible, last column reached |
051 | E | Scrolling not possible, first column reached |
052 | E | Analysis data has been updated |
053 | E | Processing not possible (contact your systems administrator) |
054 | E | Position cursor on one of the fields |
055 | E | Carry out action again |
056 | E | Objects added for correction & |
057 | E | Data from version & being read |
058 | E | Error making table settings |
059 | E | Updating must be reset in target system or target client |
060 | E | Name not reserved for SAP |
061 | E | Field catalogs exist for application, deletion not allowed |
062 | E | Info structures exist for appliation, deletion not allowed |
063 | E | No entry in table TMC2Q for info structure & client & |
064 | E | You have no authorization for LIL customizing |
065 | E | Assign fiscal year variant for posting period updating only |
066 | E | You are not authorized to display version & |
067 | E | Column widths too big and / or too many key figures selected. |
068 | E | Standard settings saved |
069 | E | Settings saved for user & |
070 | E | Applications saved |
071 | E | Error saving applicatons |
072 | E | Enter application between & and & |
073 | E | Enter application that lies outside & and & (customer area) |
074 | E | Application number already assigned |
075 | E | Position cursor on one of the applications |
076 | E | XXL function not possible - calculated key figure & was selected |
077 | E | Data transferred to XXL |
078 | E | Time stamp was set back |
079 | E | XXL function not possible |
080 | E | The selection versions you chose have been deleted |
081 | E | Position cursor on a valid line |
082 | E | Requested object currently locked |
083 | E | Requested object currently locked |
084 | E | Settings for user & deleted |
085 | E | Error reading table & from Dictionary |
086 | E | Application is SAP application and may not be changed |
087 | E | Application is SAP application and may not be deleted |
088 | E | Not possible to compare key figure for & |
089 | E | Choose one or more standard applications |
090 | E | You are not authorized to make defaults settings for application & |
091 | E | Function 'all key figures' possible for characteristic/totals line only |
092 | E | No customer applications yet defined |
093 | E | Maintenance of applications currently locked, only possible to display |
094 | E | Requested object currently blocked by the user & |
095 | E | You do not have authorization for all requested key figures |
096 | E | You do not have authorization for any key figure of the analysis |
097 | E | Error >&< when analysis was sent |
098 | E | Settings are copied from the exception |
099 | E | Drill-down not possible as this hierarchy node was already opened |
100 | E | You have no authorization for the requested key figures. |
101 | E | No data enhancement method & has yet been created |
102 | E | The method & cannot be used for info structure & (F4) |
103 | E | No list method & has yet been created |
104 | E | The program & shown in method & has syntax errors |
105 | E | The basis method & is not carried out |
106 | E | The list method & is not carried out |
107 | E | Action & terminated |
108 | E | You have no authorization to delete all selected selection versions. |
109 | E | The info structure belongs to application & (&) |
110 | E | You have no authorization to delete selection version &3 |
111 | E | Error >&< appears when calling up the analysis |
112 | E | Error nr. >&< occurs when converting the analysis list |
113 | E | No formula & was yet created |
114 | E | Reset to original width not possible. Lines are too long. |
115 | E | Lines are too long. Please select a column width smaller than &. |
116 | E | It was not possible to delete all the marked selection versions |
117 | E | You are not authorized to delete variant & & & |
118 | E | Variant & & & is locked at present |
119 | E | Variant & & & is protected |
120 | E | Selection version & of user & was deleted. Start new selection |
121 | E | Error nr. & occurs when analysis is called up from SAPoffice in program & |
122 | E | Parameters for funct. analysis call from SAPoffice cannot be determined |
123 | E | Not possible to schedule selection version (saved from standard analysis) |
124 | E | Selection version & saved |
125 | E | Please select fewer key figures or reduce the column width. |
126 | E | Selection version & deleted |
127 | E | Authorization for displaying all data in the selection version is missing |
128 | E | No selection versions can be created for info structure & |
129 | E | Info structure & not allowed |
130 | E | Selection version already exists |
131 | E | Not possible to overwrite selection version & |
132 | E | Please specify characteristics and key figures |
133 | E | No selection version exists for the selection you made |
134 | E | Selection version & does not belong to application & |
135 | E | There is no evaluation report belonging to selection version & |
136 | E | Variant & for selection version & already exists |
137 | E | No variant for selection version & available |
138 | E | Selection version & locked by another user |
139 | E | System problems when locking selection version & |
140 | E | Deletion not possible - Please delete the variant first |
141 | E | Variant for selection version & deleted |
142 | E | Background job scheduled for selection version & |
143 | E | There are not yet completed analyses to selection version & |
144 | E | There are no entries for selection version & |
145 | E | Specify selection version that begines with 'A' to 'Z' |
146 | E | Not possible to change selection version (saved from standard analysis) |
147 | E | You do not have authorization to create selection version & |
148 | E | Variant for selection version & changed |
149 | E | Version & includes key figures that do not have any authorization |
150 | E | You do not have authorization to change selection version & |
151 | E | Place the cursor on a page that can be displayed |
152 | E | No portfolio graphic with a characteristic |
153 | E | Both key figures with identical values: no portfolio graphic |
154 | E | Key figure & with identical values: no portfolio graphic |
155 | E | No selection version found |
156 | E | Place the cursor on a selection version |
157 | E | Place the cursor on a selection version or initial list |
158 | E | Variant no longer available |
159 | E | You do not have authorization to display selection version & |
160 | E | You do not have authorization to schedule selection version & |
161 | E | Selection version does not contain any data |
162 | E | Please place the cursor on a selection version |
163 | E | Hierarchy contains multiple allocations |
164 | E | Your user settings have been saved |
165 | E | Place the cursor on a selection version |
166 | E | Selection version & was deleted. |
167 | E | Scrolling not possible, last period reached |
168 | E | Scrolling not possible, first period reached |
169 | E | Characteristic must be selected due to characteristic chain: & & & & |
170 | E | Analyses of SAP info structures can only be called using the menu |
171 | E | Warning: MCS parameter has been set |
172 | E | Only character key figures are available in the initial list |
173 | E | Dynamic calculation of the period to analyze is not activated |
174 | E | Characteristic &1 cannot be chosen |
175 | E | No descriptions could be found for the characteristic <&1>(&2). |
176 | E | No plants found for company code & |
178 | E | Caution: Data may not be current (See long text) |
180 | E | Selected key figure & not contained in XXL output structure |
181 | E | TEST warning field & |
190 | E | Position cursor on a node |
191 | E | You do not have authorization to edit selection versions |
192 | E | You do not have authorization to create selection versions |
200 | E | Choose only one object to analyze |
201 | E | Choose one object to analyze |
202 | E | Specify period to analyze |
203 | E | Start of period to analyze later than end |
204 | E | End of period to analyze lies in the future |
205 | E | Name the object to analyze |
206 | E | Sales organization & not in table TVKO |
207 | E | Inconsistency between table T024E and table T001 |
208 | E | Purchasing organization & not in table T024E |
209 | E | Business area & not in table TGSB |
210 | E | Plant & not in table T001W |
211 | E | Inconsistency between table T001W and table T001K |
212 | E | Inconsistency between table T001K and table T001 |
213 | E | Division & not maintained |
214 | E | Material type & not maintained |
215 | E | Material group & not maintained |
216 | E | No valid object chosen |
217 | E | Choose a time unit |
218 | E | Choose one time unit only |
219 | E | Purchasing group & not maintained |
220 | E | Currency & not maintained |
221 | E | MRP type & not maintained |
222 | E | Enter analysis currency |
223 | E | MRP controller & not maintained in plant & |
225 | E | Storage location & not maintained in plant & |
226 | E | Table TVKWZ not maintained for sales organization & |
227 | E | Table T024E not maintained for purchasing organization & |
228 | E | Inconsistency between T001W and T001K for plant & |
229 | E | Inconsistency between T001K and T001 for plant & |
230 | E | Plants of object to analyze not maintained in T001W |
231 | E | Plant & not in table T001W (MARC segment found) |
232 | E | Table TCUR not maintained for conversion & & |
233 | E | Table T134G not maintained for business area & |
234 | E | Division & not in business area & (T134G) |
235 | E | No stat. material movements for & |
236 | E | Please limit key figure range |
237 | E | Lower limit greater than upper limit |
238 | E | Specify number of materials |
239 | E | Position cursor on material line |
240 | E | No materials in this class |
241 | E | No materials selected |
242 | E | Choose a bar chart |
243 | E | Choose one bar chart only |
244 | E | No materials in this segment |
245 | E | Choose an object for comparison |
246 | E | Choose one object for comparison only |
247 | E | Execute program RMCFNE22 in background first. |
250 | E | The key figure <&1> can only be represented as a percentage value! |
251 | E | The key figure <&1> can only be represented as a percentage value! |
252 | E | A further limitation for these characteristics will not be supported. |
253 | E | Please limit your selection at the most to &1 values! |
254 | E | Your selection does not match any subset of the existing char. values. |
280 | E | Caution: Info structures S025 and S225 active for repetitive manufacturng |
281 | E | Caution: Info structures S026 and S226 are active for repetitive mfg |
282 | E | Caution: Info structures S027 and S227 for repetitive mfg are active |
283 | E | Neither information structure S025 nor S225 will be updated |
284 | E | Neither Info structure S026 nor S226 is active for repetitive mfg |
285 | E | Neither Info structure S027 nor S227 is active for repetitive mfg |
290 | E | You cannot change the update type due to open V3 updates |
291 | E | Change of update type to/from V3 update! -> Long text |
292 | E | Deactivation difficulties due to open V3 updates! ---> Long text |
293 | E | Activation difficulties due to open V3 updates --> Long text |
300 | E | Function available from tomorrow |
301 | E | Consolidation by & with plant to analyze only |
303 | E | Number of characteristic chains > 3 (internal error) |
304 | E | Internal error (incorrect entry in table TMC7K for &1 &2) |
350 | E | Sum of parameters must equal 100 |
351 | E | Enter two or more parameters |
352 | E | Parameters for A segment must be greater than for B segment |
353 | E | Parameters for A segment must be smaller than for B segment |
354 | E | Total number of objects too high |
355 | E | Total number of objects too low |
356 | E | Choose a valid strategy |
357 | E | Choose a strategy |
358 | E | Choose one strategy only |
359 | E | Choose a valid field |
360 | E | Choose one field only |
361 | E | Specify upper limits in ascending order |
362 | E | Specify all upper limits |
363 | E | Choose at least one action |
364 | E | Only the first 2000 values displayed |
365 | E | No company code found for plant & |
366 | E | No currency found for plant & |
367 | E | No plants selected |
368 | E | No materials selected |
369 | E | & records updated |
370 | E | Work list |
380 | E | No movements found |
381 | E | No conversion possible |
382 | E | Detailed info only possible for uniquely identifiable fiscal year variant |
383 | E | Document cannot be displayed |
384 | E | No suitable general hierarchy exists for your selection |
385 | E | Characteristic values have been copied to the selection screen |
390 | E | Please select more than one material for companion selection. |
391 | E | Incorrect selection options for material companion selection |
399 | E | No selection on the selection screen |
400 | E | ****** 400-599 temporarily reserved for SIS ***************************** |
401 | E | Different company codes in the selected sales organizations |
600 | E | ****** 600-699 provisionally reserved for PURCHIS********************** |
700 | E | ****** 700-799 provisionally reserved for BCO ************************** |
701 | E | Technical information: database index valid |
702 | E | CAUTION! Data from version & will be deleted |
703 | E | Select at least one info structure |
704 | E | Only select info structure(s) for movements |
705 | E | Only info structure(s) for stocks selected |
706 | E | Error in scheduling program & as a background job |
707 | E | Deletion phase 1 started |
708 | E | Update-free period required |
709 | E | Deletion phase 2 started |
710 | E | End of update-free period |
711 | E | Setup of statistical data successfully completed |
712 | E | Setup of statistical data cancelled due to error |
713 | E | The selection option selected cannot be processed |
714 | E | Processing terminated. Document tables could not be locked |
715 | E | Multiple selection per document -> No restart possible |
800 | E | Object already exists with original in & |
801 | E | Object is only displayed |
802 | E | Processing will terminate |
803 | E | Error occurred when writing to the correction |
804 | E | Transport group: Not possible to create/change info structures |
805 | E | The development class does not exist |
806 | E | The object & & is in an SAP development class. Function not possible. |
850 | E | ** 850-899 temporarily reserved for General Hierarchy/OIW Info Catalog ** |
851 | E | Customer OIW info catalog does not yet exist |
852 | E | Customer OIW info catalog already exists |
853 | E | Standard info catalog cannot be maintained in the customer system |
854 | E | OIW info catalog inconsistent |
855 | E | Changes only possible in original language |
856 | E | The OIW info catalog is currently blocked by user & |
857 | E | You cannot attach additional OIW objects to other OIW objects |
859 | E | The OIW catalog is incorrect |
860 | E | Display only, no maintenance authorization |
861 | E | Customer-OIW info catalog does not exist, no maintenance authorization |
862 | E | No authorization for displaying or maintaining the OIW info catalog |
869 | E | Error in the period determination |
870 | E | No errors have occurred |
871 | E | The imported data source for the OIW is not available |
872 | E | Info object & from table & is not available |
873 | E | A common data source is not available for the info objects |
874 | E | Please transfer info objects in table COLUMNS_TO_READ |
875 | E | Info object & cannot be determined by the data source imported |
876 | E | No data could be found for the selection requirements |
877 | E | Value & is not available for the field SELECTION-SIGN |
878 | E | Value & is not available for the field SELECTION-OPTION |