This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class MC (Aggregate: Views, Matchcodes, Sperrobjekte) is a standard Message Class in SAP ERP and is part of the package SDVI.
Message Class | MC |
Short Text | Aggregate: Views, Matchcodes, Sperrobjekte |
Package | SDVI |
ID | Language | Text |
---|---|---|
001 | D | DB-Fehler (& &) |
002 | D | Matchcode-Feld &-& existiert nicht mehr |
003 | D | Protokoll & ist nicht vorhanden |
004 | D | Bitte eine gültige Applikationsklasse angeben |
005 | D | Batchjob & wurde erfolgreich eingeplant |
006 | D | Bitte das Objekt sichern und die Funktion nochmals auswählen |
007 | D | Internen View & zum MC-Objekt & nicht gefunden |
009 | D | Tabelle & existiert nicht (Bitte auch Tabellentyp prüfen) |
010 | D | & verstößt gegen SAA-Norm |
011 | D | Bitte eine Primärtabelle angeben |
012 | D | Matchcode-Objekt & ist nicht aktiv (Bitte zuerst aktivieren) |
013 | D | Matchcode-Id &-& ist nicht aktiv vorhanden |
014 | D | Es wurde kein passendes Objekt gefunden |
015 | D | Übergabeparameter fehlt |
016 | D | Bitte den Namen des Matchcode-Objekts vierstellig wählen |
017 | D | Bitte Matchcode-Id korrigieren |
018 | D | Es sind keine zyklischen Fremdschlüssel möglich |
019 | D | Der Name kollidiert mit einem anderen Dictionary Objekt |
020 | D | Matchcode-Objekt & ist gesperrt durch User & |
021 | D | Sie haben keine Berechtigung für das Matchcode-Objekt & |
022 | D | Matchcode-Id &-& ist gesperrt durch User & |
023 | D | Sie haben keine Berechtigung für die Matchcode-Id &-& |
024 | D | Fremdschluesselfeld &-& ist nicht aus Tabelle & (siehe Langtext) |
025 | D | Die Änderung für das Matchcode-Objekt & bitte zuerst zurücknehmen |
026 | D | Die Matchcode-Id &-& existiert nicht (Keine Anzeige möglich) |
027 | D | Join über partiellen Fremdschlüssel |
028 | D | Join über eine Konstante im Fremdschlüssel |
029 | D | Beziehung von & nach & existiert nicht mehr |
030 | D | Matchcode-Objekt & ist in Bearbeitung von & |
031 | D | Matchcode-Objekt & ist neu und in Bearbeitung von & |
032 | D | Matchcode-Id &-& ist in Bearbeitung von & |
033 | D | Matchcode-Id &-& ist neu und in Bearbeitung von & |
034 | D | Pooltabelle wird erst beim Aktivieren der MC-Id angelegt |
035 | D | Pool wird erst beim Aktivieren des MC-Objekts angelegt |
036 | D | Bitte eine Aktualisierungsart angeben |
037 | D | Bitte einen Funktionsbaustein angeben |
038 | D | Der Funktionsbaustein & existiert noch nicht |
039 | D | Der Index & zur Tabelle & existiert noch nicht |
040 | D | Matchcode-Objekt & wurde gesichert |
041 | D | Fremdschlüsselbeziehungen wurden gesichert |
042 | D | Felder wurden gesichert |
043 | D | Matchcode-Id &-& wurde gesichert |
044 | D | Bitte Matchcode-Id einstellig angeben |
045 | D | Matchcode-Objekt & ist bereits gesichert |
046 | D | Matchcode-Id &-& ist bereits gesichert |
047 | D | Bitte zuerst die Felder der Tabelle & aus dem Id löschen |
048 | D | Beim Anhängen von Feldern ist diese Cursorposition nicht möglich |
049 | D | Bitte Cursor richtig positionieren |
050 | D | Bitte Cursor auf einen Tabellennamen positionieren |
051 | D | Matchcode-Objekt & wurde zurückgesetzt |
052 | D | Matchcode-Id &-& wurde zurückgesetzt |
053 | D | Bitte zuerst die Selektionsfelder der Tabelle & aus dem Id löschen |
054 | D | Der Wert des G/K-Flags paßt nicht zur Domäne des Datenelements |
055 | D | Matchcode-Objekt & wurde gelöscht |
056 | D | Matchcode-Id &-& wurde gelöscht |
057 | D | Matchcode-Objekt & wurde nicht gelöscht (Protokoll) |
058 | D | Matchcode-Id &-& wurde nicht gelöscht (Protokoll) |
059 | D | Bitte zuerst den alten Datenbankview löschen |
060 | D | Feldname & ist nicht eindeutig |
061 | D | Feld &-& wurde nicht gefunden |
062 | D | Feld &-& (Datentyp & ist in Matchcodes nicht zulässig) |
063 | D | Das Datenelement des Feldes &-& hat sich geändert |
064 | D | Die Domäne des Feldes &-& hat sich geändert |
065 | D | Tabelle & ist von Primärtabelle aus nicht erreichbar |
066 | D | Tabelle & (Verzweigungen sind nicht möglich) |
067 | D | Fremdschlüssel & nach & ist keine Schlüsselerweiterung |
068 | D | Tabelle & ist keine transparente Tabelle |
069 | D | Löschkennzeichen bei Aktualisierungsart I nicht zulässig (MCId & ) |
070 | D | Das Feld & ist Teil eines Fremdschlüssels |
071 | D | Das Feld &-& ist als Schlüsselfeld obligatorisch |
072 | D | Obligatorische Schlüsselfelder wurden automatisch übernommen |
073 | D | Primärtabelle kann nicht gelöscht werden |
074 | D | Index auf Tabelle & wurde für Matchcode-Id &-& nicht aktiviert |
075 | D | DB-Index & auf Tabelle & muß umgesetzt werden |
076 | D | Der Index & auf der Tabelle & existiert noch nicht auf der Datenbank |
077 | D | Bitte den Matchcode &-& aufbauen |
078 | D | Für das Matchcode-Id &-& wurde kein Index generiert |
079 | D | DB-Operation für Index & ausgeführt |
080 | D | Das Feld &-& ist im Matchcode-Objekt & nicht definiert |
081 | D | Bitte Länge und Offset korrekt eingeben |
082 | D | Das Datenelement & hat nicht die erwartete Länge & |
083 | D | Bitte Überschneidung der Ausgabefelder korrigieren |
084 | D | Bitte maximale Zeilenlänge bei Ausgabefeld beachten |
085 | D | Schlüsselfelder dürfen keine Teilfelder sein |
086 | D | Die Tabelle & ist im Matchcode-Objekt nicht enthalten |
087 | D | Ausgabeposition unzulässig (Bitte korrigieren) |
088 | D | Das Datenelement & ist nicht aktiv vorhanden |
089 | D | Bitte für Teilfelder ein passendes Datenelement angeben |
090 | D | Matchcode-Objekt & wurde aktiviert |
091 | D | Matchcode-Objekt & wurde nicht aktiviert |
092 | D | Matchcode-Id &-& wurde aktiviert |
093 | D | Matchcode-Id &-& wurde nicht aktiviert |
094 | D | Matchcode-Objekt & wurde mit Warnungen aktiviert |
095 | D | Das Datenelement & hat nicht den erwarteten Typ & |
096 | D | Das Datenelement & wurde angelegt und aktiviert |
097 | D | Matchcode-Id &-& wurde mit Warnungen aktiviert |
098 | D | Fehler beim Lesen des Matchcode-Objektes & |
099 | D | Fehler beim Zugriff auf Tabelle & (GETDD23V) |
100 | D | Schablone zum Generieren von Fktbausteinen für Matchcodepflege fehlt |
101 | D | Schablone zum Generieren von Fktbausteinen für Matchcodepflege verändert |
102 | D | Wurzeltabelle & enthält keine Sätze |
103 | D | Feld & der Tabelle & fehlt in FIELD_MAP |
104 | D | Für Matchcode-Objekt & kein Matchcode-Id zum Pflegen ausgewählt |
105 | D | Funktionsbausteine zur Pflege des Matchcode-Objektes & generiert |
106 | D | Matchcode-Objekt & (Fehler beim Generieren Pflege-Funktionsbausteine) |
107 | D | & Sätze für Mandant & Matchcode-Id &-& gelöscht |
108 | D | & Sätze für Mandant & Matchcode-Id &-& generiert |
109 | D | Interner Fehler beim Lesen der Wurzeltabelle (Bitte Systemlog ansehen) |
110 | D | Bitte Cursorposition korrigieren |
111 | D | Bitte ein oder mehrere Matchcode-Ids auswählen |
112 | D | Falscher Eingabeparameter |
113 | D | Das Matchcode-Objekt & wird bereits von einem anderen Job gepflegt |
114 | D | Die Tabelle T002T ist nicht korrekt gepflegt (-> Langtext) |
115 | D | Fremdschlüsseldefinition Matchcode-Objekt & nur für transparente Ids |
116 | D | & Sätze für Matchcode-Id &-& gelöscht |
117 | D | & Sätze für Matchcode-Id &-& generiert |
118 | D | Kein Batch-Job für Matchcode-Objekt & abgesetzt (TBATG genutzt) |
119 | D | Für den Batch-Job & ist die Wiederholperiode & Tage |
120 | D | Entladen der Matchcode-Id &-& |
121 | D | Matchcode-Id &-& wurde gelöscht |
122 | D | Batch-Job & eingeplant für & Uhr am & |
123 | D | Fehler & beim Absetzen des Batch-Jobs & |
124 | D | Angegebener Starttermin für Batch-Job liegt in der Vergangenheit |
125 | D | Datenbankview & nicht gepflegt für Matchcode-Id &-& |
126 | D | Job-Wiederholperiode ist nur bei Batchverarbeitung möglich |
127 | D | Matchcode-Id &-& wurde mit & Sätzen neu aufgebaut |
128 | D | Für den Matchcode-Objekt-Auftrag wurden Batch-Jobs eingeplant |
129 | D | Datenbankview & wurde für Matchcode-Id &-& gepflegt |
130 | D | DB-Index & wurde auf Tabelle & gelöscht |
131 | D | DB-Index & wurde auf Tabelle & angelegt |
132 | D | DB-Index & auf Tabelle & wurde umgesetzt |
133 | D | DB-Index & existiert bereits auf Tabelle & |
134 | D | Die Tabelle & wurde auf der Datenbank angelegt |
135 | D | Die Tabelle & konnte auf der Datenbank nicht angelegt werden |
136 | D | Fehler Generieren der Variante - Matchcode-Objekt & Funktion & |
137 | D | Batch-Job & verwendet Variante & |
138 | D | Struktur des Matchcode-Objektes & erlaubt nur transparente Ids |
139 | D | Für &-& werden keine Matchcodesätze generiert |
140 | D | Beim Entladen des Matchcode-Ids &-& trat ein Fehler auf |
141 | D | Beim Aktivieren des Matchcode-Ids &-& trat ein Fehler auf |
142 | D | Matchcode-Id &-& erfolgreich umgesetzt |
143 | D | Fehler beim Aufbauen der Matchcodesätze für das Matchcode-Id &-& |
144 | D | Matchcode-Id &-& nicht aktiv vorhanden oder nicht pflegbar |
145 | D | Fehler bei der Auswahl von Matchcode-Ids |
146 | D | Für Matchcode-Objekt & dürfen physisch realisierte Ids angelegt werden |
147 | D | Für Matchcode-Objekt & keine physisch realisierten Ids möglich |
148 | D | Keine aktiven Matchcode-Objekte vorhanden |
149 | D | Für Matchcode-Id &-& ist Groß-Kleinschreibung nicht signifikant |
150 | D | Matchcode-Objekt & nicht vorhanden |
151 | D | Matchcode-Objekt & ist nicht aktiviert |
152 | D | Falscher Parameter & ('&' nicht zulässig) |
153 | D | FS-Felder zu & & fehlen |
154 | D | Feldbeschreibungen für Tabelle & fehlen |
155 | D | Textabelle & besitzt kein Sprachschlüsselfeld |
156 | D | Nicht alle Matchcode-Ids zum Matchcode-Objekt & sind aktiv |
157 | D | Keine Matchcode-Id zum Matchcode-Objekt & vorhanden |
158 | D | Matchcode-Objekt & (Fehler in & & &) |
159 | D | Matchcode-Ids des Matchcode-Objektes & sind transparent (->Langtext) |
160 | D | Fehlerhafte Definition des Matchcode-Objekts oder einer Matchcode-Id |
161 | D | Fehler beim Generieren Funktionsgruppe oder Funktionsbaustein |
162 | D | & fehlt für Funktion 'REC' (Bitte mit 'CRE' fortsetzen) |
163 | D | Für das Suchmuster & gibt es keine aktiven Matchcode-Objekte |
164 | D | Wiederaufsetzen für Matchcode-Objekt & nicht eindeutig (Vgl. Id &,& ) |
165 | D | & Sätze Matchcode-Id &-& in mehreren Mandanten gelöscht |
166 | D | Matchcode-Id &-& ist gesperrt (Bitte später erneut versuchen) |
167 | D | Auftrag für Matchcode-Objekt & nicht erfolgreich durchgeführt |
168 | D | Matchcode-Objekt & konnte nach Pflege nicht entsperrt werden |
169 | D | Matchcode-Id &-& konnte nicht freigegeben werden |
170 | D | Aufbauen der Sätze des Matchcode-Objektes & um & begonnen |
171 | D | Löschen der Sätze des Matchcode-Objektes & um & begonnen |
172 | D | Löschen der markierten Sätze des Matchcode-Objektes & um & begonnen |
173 | D | Wiederaufsetzen für Matchcode-Objekt & um & begonnen |
174 | D | Pflege physische Ids des Matchcode-Objekt & um & beendet |
175 | D | Der View & wurde auf der Datenbank gelöscht |
176 | D | Aktion für das Matchcode-Objekt & wurde erfolgreich durchgeführt |
177 | D | Nicht alle Aufträge wurden erfolgreich durchgeführt (->Langtext) |
178 | D | Pflege des Matchcode-Objekt & am & |
179 | D | Batch-Job für die Daten-Pflege des Matchcode-Objektes & gestartet |
180 | D | Batch-Job für Daten-Pflege Matchcode-Objekt & mit Fehlern beendet |
181 | D | Generieren Pflege-Funktionsbausteine für & um & |
182 | D | Aufträge für das Suchmuster & erfolgreich durchgeführt |
183 | D | Für Matchcode-Objekt & ist kein Wiederaufsetzen möglich |
184 | D | Für Matchcode-Objekt & wurde die Pflege abgebrochen |
185 | D | Unerwarteter Fehler beim Matchcode-Id-Löschen & & & |
186 | D | Schreibfehler bei TBATG Funktion & Objekttyp & Objektname & Id & |
187 | D | Fehler beim Schreiben in die inaktive Nametab & & & & |
188 | D | Fehler bei TBATG-Eintrag Objekttyp & Funktion & Objektname & |
189 | D | Matchcode-Objekt & gesperrt (Bitte wiederholen) |
190 | D | Unerwarteter Fehler beim Sperren des Matchcode-Objektes & |
191 | D | Unerwarteter Fehler bei Sperrfreigabe (Matchcode-Objekt &) |
192 | D | Keine Matchcode-Id des Matchcode-Objekts & ist transparent |
193 | D | Matchcode-Objekt & wurde nicht gepflegt |
194 | D | Matchcode-Pflege für Suchmuster & am & |
195 | D | Auftrag nicht für alle Matchcode-Ids erfolgreich durchgeführt |
196 | D | Matchcode-Id-Feld M_&&-& muß aktualisiert werden |
197 | D | Prüfung der Datenelemente für das Suchmuster & erfolgreich ausgeführt |
198 | D | Fehler beim Prüfen der Datenelemente der Matchcode-Ids laut Suchmuster |
199 | D | Für alle physischen Matchcode-Ids ist Groß-Kleinschreibung signifikant |
200 | D | Matchcode-Id &-& erfolgreich aktiviert |
201 | D | Aktivierung von Matchcode-Id &-& abgebrochen |
202 | D | Matchcode-Objekt & ist nicht aktiv vorhanden |
203 | D | Matchcode-Id &-& wurde nicht gefunden |
204 | D | Tabelle & existiert bereits (Bitte anderen Namen wählen) |
205 | D | Matchcode-Tabelle hat & Bytes (Maximum sind & Bytes) |
206 | D | Matchcode-Tabelle & konnte nicht aktiviert werden |
207 | D | Matchcode-Tabelle & wurde angelegt und aktiviert |
208 | D | Feld &-& wurde nicht gefunden |
209 | D | Id-Feld ist nicht im Matchcode-Objekt enthalten |
210 | D | Zur Matchcode-Id &-& gibt es keine Felder |
211 | D | Die Schluessellaenge der Wurzeltabelle zum Matchcode-Objekt & ist zu lang |
212 | D | Datenelement & konnte nicht angelegt werden |
213 | D | Aktiviere Matchcode-Id & |
214 | D | Fehler beim Lesen der Tabellen des Matchcode-Objekts & |
215 | D | Zum Matchcode-Objekt & existieren noch keine Ids |
216 | D | Interner Fehler |
217 | D | Index & auf Tabelle & wird für die Matchcode-Id &-& verwendet |
218 | D | Index & auf Tabelle & existiert noch auf der Datenbank |
219 | D | Index & auf Tabelle & wurde gelöscht |
220 | D | Status-Parameter & ist ungültig |
221 | D | Control-Parameter & ist ungültig |
222 | D | Die Matchcode-Id &-& muß umgesetzt werden |
223 | D | Fehler beim Lesen Feldbes. für MCO & MCID & Index & Tab. & |
224 | D | Bei der Aktualisierungsart 'I' ist kein Löschkennzeichen erlaubt |
225 | D | Tabelle & ist keine transparente Tabelle |
226 | D | Die generierte Matchcode-Pooltabelle & wurde gelöscht |
227 | D | Der generierte Matchcode-View & wurde im Data Dictionary gelöscht |
228 | D | Bitte zuerst den View auf der Datenbank löschen |
229 | D | Bei transparenten Matchcodes sind keine Teilfeldangaben möglich |
230 | D | Schlüsselfeld &-& fehlt |
231 | D | Der Fremdschlüssel von & nach & existiert nicht |
232 | D | Schlüsselfeld & liegt außerhalb des Schlüsselbereichs |
233 | D | Feld &-& gehört nicht zum MC-Objekt oder einer Id-Tabelle |
234 | D | Selektionsbedingung ist fehlerhaft |
235 | D | Matchcode-Objekt & enthält kein Id mit der Aktualisierungsart 'P' |
236 | D | Zur Matchcode-Id &-& existiert noch kein passender Index (-> Langtext) |
237 | D | Zuviele synchrone Matchcode-IDs zur Tabelle & |
238 | D | Matchcode-Id &-& ist nicht physisch angelegt |
239 | D | Pool & für Matchcode-Objekt & auf Datenbank gelöscht |
240 | D | Pool & konnte auf Datenbank nicht gelöscht werden |
241 | D | Pool & konnte auf Datenbank nicht angelegt werden |
242 | D | Pool & für Matchcode-Objekt & auf Datenbank angelegt |
243 | D | Hintergrundverarbeitung im Moment nicht möglich (Bitte Langtext beachten) |
244 | D | Keine &-Aktion für Klassifikations-Matchcode-Id &-& |
245 | D | Aufträge nicht erfolgreich durchgeführt |
246 | D | Für das Matchcode-Objekt & wurde der Batch-Job DB-MCOB& eingeplant |
247 | D | Für das Suchmuster & wurden erfolgreich Batch-Jobs eingeplant |
248 | D | Sie haben keine Matchcode-Id ausgewählt |
249 | D | Felder ohne Datenelemente sind in MC-Objekten nicht erlaubt |
250 | D | Matchcode-Id &-& ist konsistent |
251 | D | Matchcode-Id &-& ist nicht konsistent |
252 | D | Konsistenzprüfung für Matchcode-Id & |
253 | D | Fehler beim Aktualisieren des Funktionsbausteines MC_UPDATE_& |
254 | D | Konsistenzprüfung Matchcode-Objekt & |
255 | D | Matchcode-Objekt & ist konsistenz |
256 | D | Matchcode-Objekt & ist nicht konsistent |
257 | D | Keine Matchcode-Objekte mit physisch realisierten Ids vorhanden |
258 | D | Matchcode-Objekte für Suchmuster & nicht gepflegt |
259 | D | Matchcode-Objekte für Suchmuster & erfolgreich gepflegt |
260 | D | Matchcode-Objekt & wurde aktiviert |
261 | D | Matchcode-Objekt & konnte nicht aktiviert werden |
262 | D | Matchcode-Objekt & konnte nicht gelesen werden |
263 | D | Matchcode-Id &-& paßt nicht zu neuem Matchcode-Objekt |
264 | D | Matchcode-Objekt & hat keine Felder |
265 | D | Sie haben bei dem Matchcode-Id &-& die Tabellen geändert (siehe Langtext) |
266 | D | Pool & konnte nicht im ABAP/4 Dictionary angelegt werden |
267 | D | Pool & wurde im ABAP/4 Dictionary angelegt und aktiviert |
268 | D | Matchcode-Pool konnte nicht generiert werden |
269 | D | Matchcode-Tabelle & enthält noch Daten (siehe Langtext) |
270 | D | Aktiviere Matchcode-Objekt & |
271 | D | Feld &-& (Tabelle & gehört nicht zum MC-Objekt) |
272 | D | Bitte Matchcode-Id &-& ändern und nachaktivieren |
273 | D | Die Aktualisierungsart & ist nicht zulässig |
274 | D | Unerwarteter Fehler beim Aufruf der Funktion & aufgetreten |
277 | D | Musterpool & wurde nicht gefunden |
278 | D | Laufzeitobjekt konnte nicht generiert werden |
279 | D | Fehler beim Lesen des Matchcode-Objekts (Inkonsistenz) |
280 | D | Der Name des Matchcode-Objekts ist unzulässig |
281 | D | Der Pool & existiert noch nicht auf der Datenbank |
282 | D | Tabelle & existiert nicht oder hat falschen Tabellentyp |
283 | D | Tabelle & hat keinen Fremdschlüssel zur Primärtabelle |
284 | D | Feld &-& (Fremdschlüsselbeziehung zur Tabelle & fehlt) |
285 | D | Unzulässiges Feld im Matchcode-Objekt |
286 | D | Unzulässige Beziehungsstruktur im Matchcode-Objekt |
287 | D | Funktionsbaustein & wurde aktualisiert |
288 | D | Funktionsbaustein & konnte nicht aktualisiert werden |
289 | D | Tabelle & wird noch in der Matchcode-Id &-& verwendet |
290 | D | Basisfeld &-& wird noch in der Matchcode-Id &-& verwendet |
291 | D | Der Pool & existiert noch auf der Datenbank |
292 | D | Zum Matchcode-Objekt & gibt es noch Ids |
293 | D | Laufzeitobjekt wurde angelegt |
294 | D | Der Pool & zum Matchcode-Objekt & wurde gelöscht |
295 | D | Inkonsistenz Matchcode-Objekt-Feld & zwischen N- und A-Version |
296 | D | Inkonsistenz Matchcode-Objekt & von N- und A-Version (Header,Tabellen) |
297 | D | Fehler beim Löschen Laufzeitobjekt & |
298 | D | Laufzeitobjekt wurde für Matchcode-Id &-& angelegt |
299 | D | Alle Matchcode-Pools auf der DB existieren auch im DD |
300 | D | *** 301 - 309 reserviert für Matchcode Selektionsroutinen MC_... |
301 | D | Die Id & existiert nicht zum Matchcode-Objekt & |
302 | D | Der Suchbegriff ist fehlerhaft (Bitte korrigieren) |
303 | D | Es gibt mehr als & Sätze (Bitte Suche präzisieren) |
304 | D | Es wurden keine passenden Matchcode Daten gefunden |
305 | D | Funktionsbaustein & für MC-Id &-& fehlt |
306 | D | Matchcode-Pool & existiert auf Datenbank aber nicht im SAP-DD |
307 | D | Datenbankview & konnte nicht gelöscht werden |
308 | D | Interner Fehler bei der Pflege des Matchcode-Objektes & aufgetreten |
309 | D | Es wurde genau ein Satz gefunden |
310 | D | Start der Selekionsprogrammgenerierung für & Matchcode-Objekte |
311 | D | Selektionsprogrammgenerierung mit & Fehlern beendet |
312 | D | Selektionsprogramm & für Matchcode-Objekt & generiert |
313 | D | Die Generierung des Programms & mit Fehler & abgebrochen |
314 | D | Löschen der TADIR-Einträge generierter Matchcode-Programme 'MC_' |
315 | D | Es wurden & TADIR-Einträge 'R3TR PROG MC_...' gelöscht |
316 | D | TADIR-Eintrag & wurde gelöscht |
318 | D | Pflegefunktionsbaustein für Matchcode-Objekt & nicht löschbar |
319 | D | Systemmatchcode-Id darf nicht deaktiviert werden |
320 | D | Matchcode-Id &-& erfolgreich deaktiviert |
321 | D | Tabelle & wurde auf der Datenbank gelöscht |
322 | D | Tabelle & ist auf der Datenbank nicht vorhanden |
323 | D | View & wurde auf der Datenbank angelegt |
324 | D | View & existiert bereits auf der Datenbank |
325 | D | Die Umsetzung für das Matchcode-Objekt & war erfolgreich |
326 | D | Die Umsetzung für das Matchcode-Objekt & war nicht erfolgreich |
327 | D | Deaktivierung von MC-Ids für das Matchcode-Objekt & nicht notwendig |
328 | D | Matchcode Id &-& konnte nicht aktiviert werden |
329 | D | Matchcode Id &-& wurde nicht deaktiviert |
330 | D | Deaktiviere Matchcode Id &-& |
331 | D | Matchcode-Id &-& erfolgreich umgesetzt |
332 | D | Matchcode-Id &-& wurde mit Warnungen umgesetzt |
333 | D | Matchcode-Id &-& konnte nicht umgesetzt werden |
334 | D | Warning beim Aufbauen der Matchcode-Sätze für das Id &-& |
335 | D | Fehler beim Generieren des Explain-Planes für Suchhilfe aufgetreten |
336 | D | Bei der Eingabe der Suchbedingungen trat ein Fehler auf (siehe Langtext) |
337 | D | Explain-Plan ist im Moment nicht anzeigbar |
338 | D | Die generierte SQL-Anweisung wird länger als im Programm vorgesehen |
339 | D | Tabelle oder View enthält keine Felder |
340 | D | Tabelle oder View hat keinen Eintrag in der Nametab (SAP-Steuertabelle) |
341 | D | Interner Fehler beim Generieren des Explain-Planes |
342 | D | Fehler beim Generieren eines Hilfsprogrammes |
343 | D | Aufbau der Matchcode-Sätze ist nicht notwendig |
344 | D | Start von sapmaco im Batch für das Matchcode-Objekt & nicht möglich |
345 | D | Fehler beim Lauf von sapmaco im Batch für & aufgetreten -> Langtext |
348 | D | Matchcodes werden in Unicode-Systemen nicht unterstützt (-> Langtext) |
349 | D | Matchcodes werden nicht mehr unterstützt (-> Langtext) |
350 | D | Sperrobjekt & wurde angelegt |
351 | D | Tabelle & wurde nicht gefunden |
352 | D | Sperrobjekt & ist nicht aktiv vorhanden |
353 | D | Sperrobjekt & konnte nicht generiert werden |
354 | D | Sperrmodus & ist unzulässig |
355 | D | Funktionsbausteine erhalten Bezugsstrukturen |
356 | D | Für das Sperrobjekt & konnten keine Basistabellen gefunden werden |
357 | D | Für das Feld &-& konnten keine Fremdschlüsselfelder gefunden werden |
358 | D | Das Feld &-& konnte nicht als Sperrargument gefunden werden |
359 | D | Funktionsbaustein & existiert schon und ist gesperrt |
360 | D | Funktionsbaustein & existiert schon und wurde nicht gelöscht |
361 | D | Funktionsgruppe & ist gesperrt |
362 | D | Funktionsbaustein & konnte nicht generiert werden |
363 | D | Report & konnte nicht gefunden werden |
364 | D | Die Funktionsgruppen &Q, &0,...,& sind bereits voll |
365 | D | Generierte Funktionsgruppen zu Sperrobjekten sind nicht änderbar |
366 | D | XPRA XDDENQAC: |
367 | D | Anwendung: Basis Mandant: * |
368 | D | Funktionsbausteine zum Sperrobjekt & konnten nicht generiert werden |
370 | D | ********* Abhängigkeiten Tabellenänderung <--> Views *** PROG RADVIDEP |
371 | D | Tabellentypänderung für Basistabelle von View & nicht erlaubt |
372 | D | Feld &-& wird noch als Viewfeld im View & benutzt |
373 | D | Feld &-& wird noch in Selektionsbed./Join von View & benutzt |
374 | D | Typ/Länge/Decimalstellen von Viewfeld &-& bitte anpassen |
375 | D | Datenelement von Viewfeld &-& bitte anpassen. |
376 | D | Bitte Selektionsbedingung von View & an Typänderung anpassen |
385 | D | Aktivierung verursacht durch View & |
386 | D | Für Viewvariante & muß & ein Pflegeview sein |
391 | D | Standardappend & zu View & existiert schon |
392 | D | Standardname & für Append-View zum View & ist unzulässig |
393 | D | Standardname & für Append-View zum View & ist schon vergeben |
394 | D | Die Bearbeitung des Append-View zum View & wurde abgebrochen |
395 | D | Bitte geben Sie einen Namen für den Append-View an |
400 | D | View-Checker für VIEW & gestartet |
401 | D | View & ist im ABAP/4 Dictionary nicht vorhanden |
402 | D | View & ist auf DB-Ebene nicht angelegt |
403 | D | Die Viewdefinitionen von DD und DB sind nicht konsistent |
404 | D | Viewdefinition aus der Datenbank konnte nicht gelesen werden |
405 | D | Syntax der Viewdefinition auf DB unbekannt |
406 | D | Fehler aus Konsistenzschicht (& - &) |
407 | D | Undefinierter Eintrag '&' in & |
408 | D | Probleme beim Lesen der Joins aus DD05P |
409 | D | Feldanzahl von View und SELECT-Statement unterschiedlich |
410 | D | Viewdefinitionen auf DD- und DB-Ebene sind konsistent |
411 | D | View benutzt verschiedene Tabellen auf DD- und DB-Ebene |
412 | D | View benutzt verschiedene Felder auf DD- und DB-Ebene |
413 | D | Verschiedene JOIN-Bedingungen auf DD- und DB-Ebene |
414 | D | Verschiedene Selektions-Bedingungen auf DD- und DB-Ebene |
415 | D | Vergleich von aktiver Version mit der Datenbank |
416 | D | Vergleich von überarbeiteter Version mit der Datenbank |
419 | D | View-Check für VIEW & beendet |
420 | D | Versionsverwaltung für Objekttyp & ist hier nicht vorgesehen |
440 | D | Prüfen der Matchcode-Objekte auf Konsistenz |
441 | D | Fehler beim Prüfen des Matchcode-Objektes (&) |
442 | D | Namenskonvention für & verletzt |
443 | D | Keine Wurzeltabelle für Matchcode-Objekt & vereinbart |
444 | D | Die im Matchcode-Objekt & verwendete Tabelle & existiert nicht im DD |
445 | D | Für das Matchcode-Objekt & sind keine Felder vereinbart |
446 | D | Das Feld &-& existiert nicht |
450 | D | Ids des Matchcode-Objektes & umsetzen |
451 | D | Matchcode-Objekt & und seine Ids erfolgreich umgesetzt |
452 | D | Warnings/Fehler beim Umsetzen Matchcode-Objekt & mit Ids |
455 | D | Laufzeit-Objekt für Matchcode-Objekt & gelöscht |
456 | D | Fehler beim Löschen Laufzeit-Objekt Matchcode-Objekt & |
457 | D | Laufzeit-Objekt für Matchcode-Id &-& gelöscht |
458 | D | Fehler beim Löschen Laufzeit-Objekt Matchcode-Id &-& |
461 | D | Falscher Eintrag für Matchcode-Umsetzer & & & & |
462 | D | Utility-Funktionsbausteine gelöscht (Matchcode-Objekt &) |
463 | D | Fehler Löschen Utility-Funktionsbausteine (MC-Objekt &) |
464 | D | Funktionsbaustein MC_UPDATE_& gelöscht |
465 | D | Fehler beim Löschen des Funktionsbausteines MC_UPDATE_& |
466 | D | Funktionsbaustein MC_UPDATE_& für Id &-& aktualisiert |
467 | D | Fehler Aktualisieren Funktionsbaustein MC_UPDATE_& Id &-& |
468 | D | Utility-Funktionsbausteine generiert (Matchcode-Objekt &) |
469 | D | Fehler Generieren Utility-Funktionsbausteine (MC-Objekt &) |
470 | D | Matchcodesätze für Matchcode-Objekt & und Ids generieren |
471 | D | Matchcodesätze für Matchcode-Objekt & und Ids aufgebaut |
472 | D | Funktionsbaustein MC_UPDATE_& wurde generiert |
473 | D | Fehler Generieren des Funktionsbausteines MC_UPDATE_& |
474 | D | Matchcode-Id &-& noch nicht aktiv vorhanden |
475 | D | Laufzeitobjekt für Matchcode-Objekt & wurde angelegt |
476 | D | Laufzeitobjekt für Matchcode-Id &-& wurde angelegt |
477 | D | & & & für Batchumsetzung eingetragen |
478 | D | & & & für Batchumsetzung bereits eingetragen |
479 | D | Für das Matchcode-Objekt & ist kein physischer Pool angelegt |
480 | D | Funktionsbaustein MC_CREATE/UPDATE/DELETE_& nicht generiert -> Langtext |
504 | D | Join-Felder &1-&2 und &3-&4 stammen aus der gleichen Tabelle |
505 | D | Bitte Fremdschlüssel &-& für Join-Operation korrekt definieren |
506 | D | Inkonsistenz beim Referenzfeld zu &-& |
507 | D | & & wurde aktiviert |
508 | D | & & konnte nicht aktiviert werden (Siehe Protokoll) |
509 | D | Suchhilfe & nicht vererbt: Basisfeld &-& fehlt in View |
510 | D | Es existiert bereits View mit dem Namen & |
511 | D | Änderung der Primärtabelle (Abhängige Elemente werden gelöscht) |
512 | D | & & ist nicht aktiv vorhanden |
513 | D | Join-Views sind immer Read-Only |
514 | D | Help-Views sind immer Read-Only |
516 | D | Es existiert bereits ein Matchcode-Objekt mit dem Namen & |
517 | D | Es existiert bereits ein Sperrobjekt mit dem Namen & |
518 | D | Es existiert bereits eine Tabelle mit dem Namen & |
520 | D | & & ist momentan gesperrt durch Benutzer & |
521 | D | Sie haben keine Berechtigung für & & |
522 | D | Bitte einen Viewtyp angeben |
523 | D | Datenbankviews dürfen nur transparente Tabellen enthalten |
524 | D | Der View enthält mehr als eine Tabelle |
525 | D | Der View & wurde auf der Datenbank gelöscht |
526 | D | Der View & wurde auf der Datenbank angelegt |
527 | D | Der View & wurde auf der Datenbank umgesetzt |
528 | D | Datenbankfunktion wurde nicht durchgeführt (Siehe Protokoll) |
530 | D | & & ist in Bearbeitung von & |
531 | D | & & ist neu und in Bearbeitung von & |
532 | D | Beim Löschen des View & auf der Datenbank trat ein Fehler auf |
533 | D | Beim Anlegen des View & auf der Datenbank trat ein Fehler auf |
534 | D | Beim Umsetzen des View & auf der Datenbank trat ein Fehler auf |
535 | D | Datenelement stimmt mit Typ/Länge des Basisfeldes nicht überein |
536 | D | Domäne zum Datenelement & stimmt nicht mit Basisfeld überein |
537 | D | Bitte gültiges Datenelement angeben |
538 | D | Domäne zu &-& hat sich geändert |
539 | D | Geändertes Datenelement zu &-& wurde für Viewfeld & übernommen |
540 | D | & & wurde gesichert |
541 | D | Ausgewählte Tabellen und Beziehungen wurden gesichert |
542 | D | Felder wurden gesichert |
543 | D | Obligatorische Schlüsselfelder wurden automatisch übernommen |
544 | D | Tabellen wurden verändert (Feldauswahl wurde angepaßt) |
545 | D | & & ist bereits gesichert |
546 | D | Tabelle & ist nicht aktiv vorhanden oder inkonsistent |
547 | D | Tabellen und Beziehungen sind bereits gesichert |
548 | D | Schlüsselfelder wurden vorgeschlagen |
549 | D | Es wurden keine Felder ausgewählt (Sichern ist nicht möglich) |
550 | D | Inkonsistenz in Feldern festgestellt (Bitte bereinigen) |
551 | D | & & wurde zurückgesetzt |
552 | D | Die Keyfelder eines DB-Views müssen zusammenhängend am Anfang stehen |
553 | D | Views vom Typ & werden nicht mehr unterstützt |
554 | D | View erlaubt nur lesenden Zugriff, Pflege ist daher nicht möglich |
555 | D | & & wurde gelöscht |
556 | D | Alle abhängigen Elemente wurden gelöscht |
557 | D | & & konnte nicht gelöscht werden (Protokoll) |
558 | D | 'Nur Anzeige mit Data Browser erlaubt' wurde automatisch gesetzt |
559 | D | Restriktion wirkt nicht auf Primärtabelle (Siehe Langtext) |
560 | D | Ein Feld &-& existiert nicht |
561 | D | Die Tabelle & gehört nicht zum View & |
562 | D | Bitte einen Operator angeben |
563 | D | Bitte eine Fortsetzungszeile angeben |
564 | D | Bitte zur Verknüpfung & eine Bedingung angeben |
565 | D | Selektionsbedingung wurde gesichert |
566 | D | Selektionsbedingung ist bereits gesichert |
567 | D | Bitte die Eingabe in der Fortsetzungszeile korrigieren |
568 | D | Bitte einen Tabellennamen angeben |
569 | D | Bitte einen Feldnamen angeben |
570 | D | Bitte eine Verknüpfung 'AND' oder 'OR' angeben |
571 | D | Verknüpfungen mit 'OR' sind nur für dasselbe Feld möglich |
572 | D | In einer Fortsetzungszeile sind 'AND' und 'OR' nicht zulässig |
573 | D | Bitte die Textkonstante korrigieren |
574 | D | Bitte Konstanten in '...' eingeschließen |
575 | D | Bitte die Anzahl der Konstanten für Operator & korrigieren |
576 | D | Bitte ein Textliteral oder eine Zahlkonstante angeben |
577 | D | Bitte die Zahlkonstante korrigieren |
578 | D | Bitte als Konstante ein Textliteral angeben |
579 | D | Feld & ist nicht im Matchcode-Objekt & enthalten |
580 | D | Bitte das Basisfeld vollständig angeben |
581 | D | Bitte für das Viewfeld einen Namen angeben |
582 | D | Feld & wurde in die Selektionsbedingung übernommen |
583 | D | Bitte ein Datenelement angeben |
584 | D | Das Datenelement existiert nicht |
585 | D | Feld &-& gehört nicht zu einer der Basistabellen |
586 | D | Die Angabe von Formroutine und Basisfeld ist nicht möglich |
587 | D | Es wurde bereits gesichert |
588 | D | Restriktionen auf Feldern mit Datentyp & sind nicht möglich |
589 | D | Operator ist noch nicht unterstützt |
590 | D | Das Zielfeld darf nur einmal vergeben werden |
591 | D | Bitte ein Zielfeld auswählen |
592 | D | Bitte einen Sperrmodus angeben |
593 | D | Bitte für das Sperrargument einen Namen vergeben |
594 | D | Die Sperrobjektnamen sollten mit dem Präfix 'E' beginnen |
595 | D | Tabelle & ist im Sperrobjekt & nicht enthalten |
596 | D | Name & für Sperrobjekte nicht erlaubt |
597 | D | |
600 | D | Systemfehler in Sperrverwaltung aufgetreten |
601 | D | Das angeforderte Objekt ist momentan gesperrt durch User & |
602 | D | Das angeforderte Objekt ist durch eigene Transaktion gesperrt |
603 | D | Überlauf der Sperrtabelle |
604 | D | Die eigene Sperre ist für das angeforderte Objekt nicht mehr gesetzt |
610 | D | Nametab-Inkonsistenz bei Matchcode ID &-& |
611 | D | SQL-Fehler & beim Löschen der Pooltabelle & aufgetreten |
612 | D | Pooltabelle & erfolgreich gelöscht |
613 | D | Interner Fehler in Funktionsbaustein & aufgetreten |
614 | D | Kein Abgleich von Matchcode-Objekten notwendig |
615 | D | Matchcode-Objekt & erfolgreich abgeglichen |
616 | D | Fehler beim Abgleich des Matchcode-Objekts & aufgetreten |
619 | D | Transparente Matchcode IDs koennen nicht mehr angelegt werden -> Langtext |
620 | D | Matchcode ID wurde erfolgreich migriert |
621 | D | Suchhilfe & bereits migriert |
622 | D | Suchhilfe & nicht migriert |
623 | D | & Suchhilfen erfolgreich angelegt bzw. erweitert |
624 | D | Suchhilfe & konnte wegen TADIR-Problem & nicht erzeugt werden |
625 | D | Matchcode ID &-& konnte wegen fehlendem Ausgabefeld nicht migriert werden |
626 | D | Bitte editieren Sie die Suchhilfe & (-> Langtext) |
627 | D | Keine erweiterten SAP-Matchcodes vorhanden |
628 | D | & erweiterte SAP-Sammelsuchhilfen werden in Korrektur genommen |
629 | D | Anlegen des Auftrags für SAP-Sammelsuchhilfen gescheitert |
630 | D | Auftrag & für erweiterte SAP-Sammelsuchhilfen angelegt |
631 | D | Freigabe des Auftrags für erweiterte SAP-Sammelsuchhilfen gescheitert |
635 | D | View-Protokollierung: Aktiver Nametab-Header konnte nicht gelesen werden |
636 | D | View-Protokollierung: Inakt. Nametab-Header konnte nicht gelesen werden |
637 | D | View-Protokollierung: Aktive Nametab konnte nicht gelesen werden |
638 | D | View-Protokollierung: Aktive Nametab konnte nicht geschrieben werden |
639 | D | View-Protokollierung: Aktiver Nametab-Header wurde nicht geschrieben |
640 | D | View-Protokollierung: Inaktiver Nametab-Header wurde nicht geschrieben |
650 | D | Konsistenzprüfung für & & |
651 | D | & & ist konsistent |
652 | D | & & ist nicht konsistent |
653 | D | Aktiviere Sperrobjekt & |
654 | D | Prüfe Sperrobjekt & |
655 | D | Sperrobjekt & ist konsistent |
656 | D | Sperrobjekt & ist nicht konsistent |
659 | D | Sperrobjekt & wurde ohne Generierung der Funktionsbausteine aktiviert |
660 | D | Sperrobjekt & wurde aktiviert |
661 | D | Sperrobjekt & wurde nicht aktiviert |
662 | D | & & wurde nicht gefunden |
663 | D | Datenelement & wurde nicht gefunden |
664 | D | Domäne & wurde nicht gefunden |
665 | D | Eine Tabelle & existiert bereits (Bitte anderen Namen wählen) |
666 | D | View-Struktur & konnte nicht aktiviert werden |
667 | D | View-Struktur & wurde aktiviert |
668 | D | View-Struktur & wurde angelegt |
669 | D | Unzulässiger Viewtyp |
670 | D | Aktiviere & & |
671 | D | Aktivieren momentan gesperrt durch User & |
672 | D | & & enthält keine Felder |
673 | D | & & konnte nicht gelesen werden |
674 | D | Selektionsprogramm & wurde generiert |
675 | D | Selektionsprogramm & konnte nicht generiert werden |
676 | D | Die Beziehungsstruktur von & & ist inkonsistent |
677 | D | Obligatorisches Feld &-& fehlt |
678 | D | ENQUEUE-Funktionen konnten nicht generiert werden |
679 | D | Funktionsbaustein & in Funktionsgruppe & generiert |
680 | D | Projektionsviews dürfen nicht mehr als eine Tabelle enthalten |
681 | D | Viewänderung (Der Datenbankview & muß umgesetzt werden) |
682 | D | Der View & existiert noch nicht auf der Datenbank |
683 | D | Die Beziehung &-& zur Tabelle & gibt es nicht |
684 | D | Fehler aus Datenschnittstelle (& &-&) |
685 | D | Der View & existiert noch auf der Datenbank |
686 | D | ENQUEUE-Funktionsbausteine konnten nicht gelöscht werden |
687 | D | Eintrag 'Umsetzen DB-View &' für Batchlauf erfolgt |
688 | D | Eintrag 'Erzeugen DB-View &' für Batchlauf erfolgt |
689 | D | Eintrag 'Löschen DB-View &' für Batchlauf erfolgt |
690 | D | Lösche & & |
691 | D | & & wurde gelöscht |
692 | D | & & wurde nicht gelöscht |
693 | D | Lösche Matchcode-Id &-& |
694 | D | Matchcode-Id &-& wurde gelöscht |
695 | D | Matchcode-Id &-& wurde nicht gelöscht |
696 | D | Lösche Matchcode-Objekt & |
697 | D | Matchcode-Objekt & wurde nicht gelöscht |
698 | D | Matchcode-Objekt & wurde gelöscht |
699 | D | Eintrag der Funktion & für Batch ist nicht möglich |
701 | D | Unzulässige Fremdschlüsselbeziehung für Help-Views |
702 | D | Fehlerhafte Selektionsbedingung (& & & &) |
703 | D | Basistabelle & ist mehrfach aufgenommen |
704 | D | Zum View & sind keine Felder definiert |
705 | D | Schlüsselfelder stehen nicht zusammenhängend am Anfang des Views |
706 | D | & ist kein View (Aggregatstyp: &) |
707 | D | Änderung des Feldnamens bei Viewtyp P nicht zulässig |
708 | D | Selektionsbedingungen werden beim Projektionsview nicht berücksichtigt |
709 | D | Basistabellen vom Typ & sind für diesen Viewtyp nicht zulässig |
710 | D | Basistabellen vom Typ & sind nicht zulässig |
711 | D | Feld &-& der Selektionsbedingungen wurde nicht gefunden |
712 | D | Selektionsbedingung auf Mandant ist nicht zulässig |
713 | D | &-& ist kein semantischer Fremdschlüssel |
714 | D | Kardinalität & des Fremdschlüssels &-& ist hier nicht zulässig |
715 | D | Der Fremdschlüssel &-& ist partiell |
716 | D | Der Fremdschlüssel &-& enthält eine Konstante |
717 | D | Der Fremdschlüssel &-& verweist auf ein SYST-Feld |
718 | D | Fremdschlüssel &-& (Verweis auf externes Feld) |
719 | D | Fremdschlüssel &-& (Transitiver Verweis auf externes Feld) |
720 | D | Selektionsprogramm & wurde von Hand geändert |
721 | D | Viewfeld &-& (Viewtyp erlaubt keine Änderung des Datenel.) |
722 | D | Viewfeld &-& (Domänen der Datenelemente sind ungleich) |
723 | D | View & konnte nicht gelesen werden |
724 | D | Zugriffsfehler beim Lesen des View & |
725 | D | Bitte bei der letzten Selektionsbedingung keine Verknüpfung angeben |
726 | D | Der View muß auf der Datenbank angelegt werden |
727 | D | Der View muß auf der Datenbank gelöscht werden |
728 | D | Der View muß auf der Datenbank gelöscht und neu angelegt werden |
729 | D | Das Schlüsselfeld &-& fehlt (Bitte Pflegestatus 'nur lesen' angeben) |
730 | D | Join von & nach & nicht über Fremdschlüssel definiert |
731 | D | Obligatorisches Feld &-& ist kein Schlüsselfeld |
732 | D | Alle Felder werden als Schlüsselfeld gewertet |
733 | D | Unzulässige Fremdschlüsselbeziehung für Sperrobjekte |
734 | D | Selektionsbedingung & zum Feld &-& ist nicht erlaubt |
735 | D | Der View ignoriert Mandantenabhängigkeit der Basistabellen |
736 | D | Nicht alle Basistabellen sind über Joinbedingungen verknüpft |
737 | D | Unerlaubter Typ beim Join &-& = &-& |
738 | D | Aktiviere View & |
739 | D | Prüfe View & |
740 | D | View & wurde aktiviert |
741 | D | View & ist konsistent |
742 | D | View & wurde nicht aktiviert |
743 | D | View & ist nicht konsistent |
744 | D | Sie haben keine Berechtigung für die Datenbankänderung |
745 | D | Die Auslieferungsklassen von View und Primärtabelle stimmen nicht überein |
746 | D | Feld & ist Sprachenfeld. Überprüfen Sie die Verwendung im Schlüssel |
747 | D | Viewfeld &-& (Typ nicht konsistent mit Basisfeld) |
748 | D | Viewfeld &-& (Datenelement wird an Basisfeld angepaßt) |
750 | D | Feld &-& (Typkonflikt bei der Selektionsbedingung) |
751 | D | Feld &-& (Selektionsbedingung auf Typ & ist nicht erlaubt) |
752 | D | Feld &-& (Integerkonstante nicht in Hochkommas angeben) |
753 | D | Feld &-& (Selektionsbedingung auf SY-Feld ist nicht erlaubt) |
754 | D | Selektionsbedingung &-&: Hochkommas werden ergänzt |
755 | D | Joins müssen über Fremdschlüssel definiert werden |
756 | D | Feld &-& aus Joinbedingung existiert nicht |
757 | D | Selektion/Join über externes Feld &-& |
758 | D | Feld &-& gehört nicht zu einer Basistabelle |
759 | D | Join zu Feld &-& benutzt ein SY-Feld |
760 | D | Feld &-& für transparente Realisierung eingefügt |
761 | D | Viewfeld & fehlt in Union & |
762 | D | Viewfeld & (Datenelement oder Typ/Länge unterschiedlich bei Union) |
763 | D | Schlüsselfeld &-& fehlt |
764 | D | Typkonflikt beim Join &-& = &-& |
765 | D | Feldangabe mit * und - ist nur bei DB-Views erlaubt |
766 | D | Schlüsselfeld & der Primärtabelle & fehlt |
767 | D | Bitte mindestens eine Basistabelle angeben |
768 | D | Zeile kann nicht expandiert bzw. komprimiert werden |
769 | D | Selektionsbedingung zu &-& enthält Kleinbuchstaben |
770 | D | Pufferung ist nur für Datenbank-Views möglich |
771 | D | Technische Einstellungen werden bei Aktivierung gelöscht |
772 | D | Update des Pufferungsflags für & nicht möglich |
773 | D | Maximalzahl gep. Views für Basistabelle & überschritten |
774 | D | Bitte die Selektionsbedingungen mit AND oder OR verknüpfen |
775 | D | Operator & in Selektionsbedingung ist nicht erlaubt |
776 | D | Append-Views sind nur für Datenbank- und Projektionsviews erlaubt |
777 | D | Feldgruppen sind nur für Datenbank- und Projektionsviews erlaubt |
778 | D | Feld &: Position relativ zu Basistabelle kann nicht vertauscht werden |
780 | D | *********Konsistenzcheck von DD-Views zu DB-Views********* |
781 | D | Der View & ist nicht konsistent in den Feldern mit DB-View |
782 | D | Der View & ist nicht konsistent in den Selektionsbedingungen mit DB-View |
790 | D | Rename-Statements nach & erzeugt |
791 | D | Rename-Statements nach & konnten nicht erzeugt werden |
792 | D | Create-Statements für View & erzeugt |
793 | D | Create-Statements für View & konnten nicht erzeugt werden |
794 | D | Statements für RENAME TABLE/CREATE VIEW & erzeugt |
795 | D | Modeflag 'V' in Laufzeitobjekt vermerkt |
796 | D | Modeflag 'V' konnte nicht im Laufzeitobjekt vermerkt werden |
797 | D | Alle abhängigen Views der DB-Tabelle & werden gelöscht: |
798 | D | Tab. &: DROP-Statments konnten nicht für alle abh. Views erzeugt werden |
799 | D | |
800 | D | ************ Entitätsviews **************** |
801 | D | View & wurde Entitätstyp & zugeordnet |
802 | D | View & gesichert und Entitätstyp & zugeordnet |
803 | D | Zuordnung geändert (Nun View & zu Entitätstyp &) |
804 | D | Zuordnung gelöscht (View & zu Entitätstyp &) |
805 | D | View und Zuordnung gelöscht (View & zu Entitätstyp &) |
806 | D | Entitätstyp & ist keine View zugeordnet |
807 | D | View & und Zuordnung zu & logisch gelöscht |
808 | D | Zuordnung View & zu Entitätstyp & war noch nicht gesichert |
809 | D | View der Generalisierung & übernommen und & zugeordnet |
810 | D | View & ist bereits Entitätstyp & zugeordnet |
811 | D | Fehler beim Anlegen der Zuordnung & zu & (TDI01) |
812 | D | Keine Viewzuordnung vorhanden |
813 | D | Fehler beim Ändern der Zuordnung & zu & (TDI01) |
814 | D | Fehler beim Löschen der Zuordnung & zu & (TDI01) |
818 | D | Aktiv, aber inkonsistent mit View der Generalisierung |
821 | D | Typ & unzulässig bei Zuordnung zu Entitätstyp |
822 | D | Typ & nur bei Zuordnung zu Entitätstyp zulässig |
823 | D | Namensraum U_ und ENTnnnnnn nur für Views zu Entitäten erlaubt |
824 | D | View & ist keinem Enttyp zugeordnet |
828 | D | Zuordnung gelöscht, View & nicht (Es gibt Datenbankview) |
829 | D | Zuordnung gelöscht (Fehler beim Löschen der View &) |
831 | D | Zugeordnete View & nicht aktiv vorhanden |
832 | D | Zugeordnete View & ist vom Typ &, also nicht operational |
841 | D | Zu dem View & gibt es mehrere Generalisierungen: |
842 | D | Zu dem View & gibt es keine aktive Generalisierung |
843 | D | Eigenschaften aus View/Tabelle & wurden übernommen |
844 | D | Tabelle & ist keine Basistabelle von & |
845 | D | Das Objekt ist im Datenmodell der Entität & zugeordnet |
846 | D | Diese Entität hat folgende Spezialisierungen: |
850 | D | Fehler in RDD25UDM (& & & &) |
860 | D | Ererbte Tabelle & kann nicht gelöscht werden |
861 | D | Ererbte Bedingung kann nicht gelöscht werden |
862 | D | Vor ererbte Bedingung kann nicht eingefügt werden |
863 | D | Vor ererbte Bedingung kann nicht eingesetzt werden |
864 | D | Ererbte Bedingung kann nicht markiert werden |
871 | D | Feld &-& ist ererbt und kann nicht gelöscht werden |
872 | D | Vor das ererbte Feld &-& kann nicht eingefügt werden |
873 | D | Vor das ererbte Feld &-& kann nicht eingesetzt werden |
874 | D | Feld &-& ist ererbt und kann nicht markiert werden |
880 | D | ERBEN von der Gen. &, View & |
881 | D | VERERBEN & an &, View & an & |
882 | D | View & nicht aktiv vorhanden |
883 | D | Die Primärtabelle von & muß in & vorkommen |
884 | D | Name & für Feld &-& durch & ersetzt |
885 | D | Sektab & nun Folgetabelle von & statt von & |
886 | D | Primtab & nun Folgetabelle von & |
887 | D | Redundantes Joinfeld &-& gelöscht |
888 | D | Fehler beim Lesen des Fremdschlüssels &-& |
889 | D | Viewfeld & wegen Konflikt umbenannt zu & |
890 | D | Sektab & nun über Prüffeld & statt über & verbunden |
891 | D | Sektab & nun Primtab |
892 | D | Selektion von & NICHT stärker als von & |
893 | D | ENTERBEN von & durch &, View & durch & |
894 | D | Geerbtes Viewfeld & entfernt |
895 | D | Geerbtes Schlüsselfeld & nun eigenes Feld |
897 | D | & |
898 | D | & & |
899 | D | & & & & |
990 | D | Protokollierungsflag erfolgreich initialisiert in DDNTT |
991 | D | Initialisierungsfehler Protokollierungsflag in Tabelle DDNTT |
998 | D | Matchcode Upgrade per Austauschverfahren |
999 | D | Konventioneller Matchcode Upgrade |
001 | E | DB error: (& &) |
002 | E | Matchcode field &-& no longer exists |
003 | E | Log & does not exist |
004 | E | Enter a valid application class |
005 | E | Background job & successfully scheduled |
006 | E | Save the object and select the function again |
007 | E | Internal view & for MC object & not found |
009 | E | Table & does not exist. Please also check table type |
010 | E | & violates SAA standard |
011 | E | Enter a primary table |
012 | E | Matchcode object & is not active. Start by activating |
013 | E | Matchcode ID &-& is not active |
014 | E | No appropriate object found |
015 | E | Transfer parameters missing |
016 | E | Choose a 4-character matchcode object name |
017 | E | Correct matchcode ID |
018 | E | No cyclic foreign keys possible |
019 | E | Name clashes with that of another Dictionary object |
020 | E | Matchcode object & is locked by user & |
021 | E | No authorization for matchcode object & |
022 | E | Matchcode ID &-& locked by user & |
023 | E | No authorization for matchcode ID &-& |
024 | E | Foreign key field &-& not from table & (see long text) |
025 | E | Start by withdrawing the modification to matchcode object & |
026 | E | Matchcode ID &-& does not exist. Display not possible |
027 | E | Join with partial foreign key |
028 | E | Join using a constant in the foreign key |
029 | E | Relationship from & to & no longer exists |
030 | E | Matchcode object & is being processed by & |
031 | E | Matchcode object & is new and being processed by & |
032 | E | Matchcode ID &-& is being processed by & |
033 | E | Matchcode ID &-& is new and being processed by & |
034 | E | Pooled table not created until MC ID is activated |
035 | E | Pool not created until MC object is activated |
036 | E | Enter an update type |
037 | E | Enter a function module |
038 | E | Function module & does not exist yet |
039 | E | Index & to table & does not yet exist |
040 | E | Matchcode object & saved |
041 | E | Foreign key dependencies saved |
042 | E | Fields were saved |
043 | E | Matchcode ID &-& saved |
044 | E | Define one-position matchcode ID |
045 | E | Matchcode object & has already been saved |
046 | E | Matchcode ID &-& has already been saved |
047 | E | First delete the fields of table & from the ID |
048 | E | This cursor position not allowed when adding fields |
049 | E | Position the cursor correctly |
050 | E | Position cursor on a table name |
051 | E | MC object & reset |
052 | E | Matchcode ID &-& reset |
053 | E | First delete the selection fields of table & from the ID |
054 | E | The value of the U/L flag does not fit the domain of the data element |
055 | E | Matchcode object & deleted |
056 | E | Matchcode ID &-& deleted |
057 | E | Matchcode object & not deleted (log) |
058 | E | Matchcode ID &-& not deleted (log) |
059 | E | First delete the old database view |
060 | E | Field name & not unique |
061 | E | Field &-& not found |
062 | E | Field &-& (data type & not allowed in matchcodes) |
063 | E | Data element for field &-& has changed |
064 | E | The domain of field &-& has changed |
065 | E | Table & cannot be accessed from primary table |
066 | E | Table &: (Switching not allowed) |
067 | E | Foreign key & after & is not a key extension |
068 | E | Table & is not transparent |
069 | E | Deletion flag not allowed with update type I (Matchcode ID &) |
070 | E | Field & is part of a foreign key |
071 | E | Field &-& required as a key field |
072 | E | Required key fields transferred automatically |
073 | E | Primary table cannot be deleted |
074 | E | Index to table & was not activated for matchcode ID &-& |
075 | E | Database index & for table & must be converted |
076 | E | DB index & for table & has not yet been created in the database |
077 | E | Build matchcode &-& |
078 | E | No index has been generated for matchcode ID &-& |
079 | E | DB operation executed for index & |
080 | E | Field &-& not defined in MC object & |
081 | E | Enter length and offset correctly |
082 | E | Data element & does not have expected length & |
083 | E | Please correct output field intersection |
084 | E | Note maximum line length for output field |
085 | E | Key fields may not be component fields |
086 | E | The matchcode object does not contain table & |
087 | E | Output position not allowed. Please correct |
088 | E | Data element & is not active |
089 | E | Enter a suitable data element for component fields |
090 | E | Matchcode object & was activated |
091 | E | Matchcode object & was not activated |
092 | E | Matchcode ID &-& was activated |
093 | E | Matchcode ID $-$ not activated |
094 | E | Matchcode object & activated with warning message |
095 | E | Data element & is not of expected type & |
096 | E | Data element & was created and activated |
097 | E | Matchcode ID &-& activated with warnings |
098 | E | Error when reading matchcode object & |
099 | E | Error when accessing Table & (GETDD23V) |
100 | E | Report template for gen. function modules for matchcode maint. missing |
101 | E | Report template for gen. function modules for matchcode maint. changed |
102 | E | Root table & contains no records |
103 | E | Field & of table & missing from FIELD_MAP |
104 | E | No Matchcode ID for MC object & selected for maintenance |
105 | E | Function modules for maintaining MC object & generated |
106 | E | Matchcode object & - error generating maintenance function modules |
107 | E | & records for client & matchcode ID &-& deleted |
108 | E | & records for client & matchcode ID &-& generated |
109 | E | Internal error reading the root table (look at syslog) |
110 | E | Incorrect cursor position |
111 | E | Choose one or more matchcode IDs |
112 | E | Incorrect input parameter |
113 | E | MC object & is already being maintained by another job |
114 | E | Table T002T has not been correctly maintained (-> long text) |
115 | E | This definition of matchcode object & is not supported |
116 | E | & records deleted for matchcode ID &-& |
117 | E | & records generated for matchcode ID &-& |
118 | E | No background job started for matchcode object & (TBATG used) |
119 | E | The repetition period for the background job & is & days |
120 | E | Unload matchcode ID &-& |
121 | E | Matchcode ID &-& deleted |
122 | E | Background job & planned for time & date & |
123 | E | Error & when starting background job & |
124 | E | Start of background job is in the past |
125 | E | Database view & not maintained for matchcode ID &-& |
126 | E | Job repetition period only allowed with background processing |
127 | E | Matchcode ID &-& recreated with & records |
128 | E | Background jobs were scheduled for the MC object request |
129 | E | Database view & was maintained for matchcode ID &-& |
130 | E | DB index & was deleted from table & |
131 | E | DB index & was created in table & |
132 | E | DB index & in table & was converted |
133 | E | DB index & already exists in table & |
134 | E | Table & was created in the database |
135 | E | Table & could not be created in the database |
136 | E | Error generating version - matchcode object & function & |
137 | E | Background job & uses version & |
138 | E | Structure of matchcode object & only permits transparent IDs |
139 | E | No matchcode records are generated for &-& |
140 | E | An error occurred when unloading the matchcode ID &-& |
141 | E | An error occurred when activating the matchcode ID &-& |
142 | E | Matchcode ID &-& successfully converted |
143 | E | Error constructing the matchcode records for matchcode ID &-& |
144 | E | Matchcode ID &-& does not actively exist or cannot be maintained |
145 | E | Error selecting matchcode IDs |
146 | E | Physically implemented IDs may be created for matchcode object & |
147 | E | No physically impemented IDs possible for matchcode object & |
148 | E | No active matchcode objects exist |
149 | E | Uppercase/lowercase not significant for matchcode ID &-& |
150 | E | Matchcode object & does not exist |
151 | E | MC object & not activated |
152 | E | Incorrect parameter & ('&' not allowed) |
153 | E | FK fields for & & missing |
154 | E | Field descriptions for table & missing |
155 | E | Text table & does not have a language key field |
156 | E | Not all MC IDs for MC object & are active |
157 | E | No matchcode ID exists for matchcode object & |
158 | E | Matchcode object & (error in & & &) |
159 | E | Matchcode IDs of matchcode object & are transparent (-> long text) |
160 | E | Error in definition of MC object or MC ID |
161 | E | Error when generating function group or module |
162 | E | & is missing for function REC. Continue with CRE |
163 | E | There are no active matchcode objects for search pattern & |
164 | E | Restart ambiguous for matchcode object & - see ID &,& |
165 | E | & records were deleted in several clients for matchcode ID &-& |
166 | E | Matchcode ID &-& locked - try again later |
167 | E | Request for matchcode object & not executed successfully |
168 | E | Matchcode object & could not be unlocked after maintenance |
169 | E | Matchcode ID &-& could not be released |
170 | E | Began building records of matchcode object & at time & |
171 | E | Began deleting records of matchcode object & at time & |
172 | E | Began deleting flagged records of matchcode object & at time & |
173 | E | Began restarting matchcode object & at time & |
174 | E | Maintenance of physical IDs of matchcode object & completed at & |
175 | E | View & was deleted in the database |
176 | E | Action for matchcode object & performed successfully |
177 | E | Not all requests were performed successfully (-> long text) |
178 | E | Maintenance of matchcode object & on & |
179 | E | Background job started for data maintenance of matchcode object & |
180 | E | Background job for data maintenance of MC object & ended with errors |
181 | E | Generate maintenance function modules for & at & |
182 | E | Requests for search pattern & performed successfully |
183 | E | Restarting is not possible with matchcode object & |
184 | E | Maintenance was cancelled for matchcode object & |
185 | E | Unexpected error when deleting matchcode ID & & & |
186 | E | Write error with TBATG function & object type & object name & ID & |
187 | E | Error writing to inactive nametab & & & & |
188 | E | Error with TBATG entry object type & function & object name & |
189 | E | Maintenance of matchcode object & locked (try again) |
190 | E | Unexpected error when locking matchcode object & |
191 | E | Unexpected error when unlocking (matchcode object &) |
192 | E | Matchcode object & does not have any transparent matchcode IDs |
193 | E | Matchcode object & was not maintained |
194 | E | Matchcode maintenance for search pattern & at & |
195 | E | Request not performed successfully for all matchcode IDs |
196 | E | Matchcode ID field M_&&-& must be updated |
197 | E | Check of data elements for search pattern & successful |
198 | E | Error checking the data elements of the matchcode IDs for search pattern |
199 | E | Uppercase/lowercase significant for all physical matchcode IDs |
200 | E | MC ID & & activated |
201 | E | Activation of matchcode ID &-& canceled |
202 | E | Matchcode object & not active |
203 | E | Matchcode ID &-& not found |
204 | E | Table & already exists. Choose another name |
205 | E | Matchcode table has & bytes (maximum & bytes). |
206 | E | Matchcode table & could not be activated |
207 | E | Matchcode table & created and activated |
208 | E | Field &-& not found |
209 | E | ID field not contained in matchcode object |
210 | E | There are no fields for matchcode ID &-& |
211 | E | Key length of the root table for matchcode object & is too long |
212 | E | Data element & could not be created |
213 | E | Activate Matchcode ID & |
214 | E | Error when reading the tables of MC object & |
215 | E | There are still no IDs for MC object & |
216 | E | Internal error |
217 | E | Index & to table & is used for matchcode ID &-& |
218 | E | Index & to table & is still in the database |
219 | E | Index & in table & was deleted |
220 | E | Status parameter & invalid |
221 | E | Control parameter & invalid |
222 | E | Matchcode ID &-& must be converted |
223 | E | Error reading field desc. for MCO & MC ID & index & tab. & |
224 | E | No deletion flag allowed for update type 'I' |
225 | E | Table & is not transparent |
226 | E | Generated matchcode pooled table & was deleted |
227 | E | Generated matchcode view & was deleted in ABAP Dictionary |
228 | E | Start by deleting the view on the database |
229 | E | Component fields are not allowed with transparent matchcodes |
230 | E | Key field &1-&2 missing |
231 | E | Foreign key from & to & does not exist |
232 | E | Key field & lies outside the key area |
233 | E | Field &-& does not belong to a matchcode object or ID table |
234 | E | Selection condition incorrect |
235 | E | Matchcode object & contains no ID of update type 'P' |
236 | E | No suitable index exists yet for matchcode ID &-& (-> long text) |
237 | E | Too many synchronous matchcode IDs for table & |
238 | E | Matchcode ID &-& not physically created |
239 | E | Pool & for matchcode object & deleted on database |
240 | E | Pool & could not be deleted on database |
241 | E | Pool & could not be created on database |
242 | E | Pool & created for matchcode object & on database |
243 | E | Background proc. currently not possible (Please read long text) |
244 | E | No & action for classification matchcode ID &-& |
245 | E | Requests not performed successfully |
246 | E | Background job DB-MCOB& scheduled for matchcode object & |
247 | E | Background jobs successfully scheduled for search pattern & |
248 | E | You did not select a matchcode ID |
249 | E | Fields without data elements not allowed in MC objects |
250 | E | MC ID &-& consistent |
251 | E | MC ID &-& inconsistent |
252 | E | Consistency check for Matchcode ID & |
253 | E | Error when updating function module MC_UPDATE_& |
254 | E | Consistency check for matchcode object & |
255 | E | Matchcode object & is consistent |
256 | E | Matchcode object & is not consistent |
257 | E | No matchcode objects exist with physically implemented IDs |
258 | E | Matchcode objects for search pattern & not maintained |
259 | E | Matchcode objects for search pattern & successfully maintained |
260 | E | Matchcode object & was activated |
261 | E | Matchcode object & could not be activated |
262 | E | Matchcode object & not found |
263 | E | Matchcode ID &-& does not fit new matchcode object |
264 | E | Matchcode object & has no fields |
265 | E | You changed the tables in matchcode ID &-& (see long text) |
266 | E | Pool & could not be created in the ABAP Dictionary |
267 | E | Pool & created and activated in the ABAP Dictionary |
268 | E | Matchcode pool could not be generated |
269 | E | Matchcode table & still contains data (see long text) |
270 | E | Activate matchcode object & |
271 | E | Field &-&: (Table & does not belong to matchcode object) |
272 | E | Change matchcode ID &-& and reactivate |
273 | E | Update type & not allowed |
274 | E | Unexpected error while calling function & |
277 | E | Sample pool & not found |
278 | E | Runtime object could not be generated |
279 | E | Error when reading matchcode object (inconsistency) |
280 | E | Name of matchcode object not allowed |
281 | E | Pool & does not yet exist in the database |
282 | E | Table & does not exist or has incorrect table type |
283 | E | Table & does not have a foreign key for the primary table |
284 | E | Field &-&: (foreign key dependency to table & missing) |
285 | E | Field in matchcode object not allowed |
286 | E | Invalid relationship structure in matchcode object |
287 | E | Function module & updated |
288 | E | Function module & could not be updated |
289 | E | Table & still used in matchcode ID &-& |
290 | E | Base field &-& still being used in matchcode ID &-& |
291 | E | Pool & still exists in the database |
292 | E | IDs still exist for matchcode object & |
293 | E | Runtime object was created |
294 | E | Pool & for matchcode object & was deleted |
295 | E | Inconsistency between N and A versions of matchcode object field & |
296 | E | Inconsistency between N and A versions (headers, tables) of MC obj. & |
297 | E | Error deleting runtime object & |
298 | E | Runtime object was created for matchcode ID &-& |
299 | E | All matchcode pools on the DB also exist in the ABAP Dictionary |
300 | E | *** 301 - 309 reserved for matchcode selection routines MC_... |
301 | E | MC ID & does not exist for MC object & |
302 | E | Incorrect search criteria. Please correct |
303 | E | There are more than $ records. Please be more specific |
304 | E | No appropriate matchcode data found |
305 | E | Function module & for matchcode ID &-& missing |
306 | E | Matchcode pool & exists on the DB but not in the ABAP Dictionary |
307 | E | Database view & could not be deleted |
308 | E | Internal error occurred when maintaining matchcode object & |
309 | E | Exactly one record was found |
310 | E | Start selection program generation for & matchcode objects |
311 | E | Selection program generation completed with & errors |
312 | E | Selection program & generated for matchcode object & |
313 | E | Generation of program & aborted with error & |
314 | E | TADIR and TLOCK conversion for matchcodes successfully completed |
315 | E | & TADIR entries 'R3TR PROG MC_...' deleted |
316 | E | TADIR entry & deleted |
318 | E | Maintenance function module for matchcode object & cannot be deleted |
319 | E | System matchcode ID may not be deactivated |
320 | E | Matchcode ID &-& activated successfully |
321 | E | Table & deleted on the database |
322 | E | Table & does not exist on the database |
323 | E | View & created on the database |
324 | E | View & already exists on the database |
325 | E | Matchcode object & converted successfully |
326 | E | Matchcode object & not converted successfully |
327 | E | Deactivation of MC IDs for matchcode object & not required |
328 | E | Matchcode ID &-& could not be activated |
329 | E | Matchcode ID &-& was not deactivated |
330 | E | Deactivate matchcode ID &-& |
331 | E | Matchcode ID &-& successfully converted |
332 | E | Matchcode ID &-& was converted with warnings |
333 | E | Matchcode ID &-& could not be converted |
334 | E | Warning when building the matchcode records for ID &-& |
335 | E | Error occurred when generating the explain plan for the search help |
336 | E | An error occurred when entering the search conditions (see long text) |
337 | E | Explain plan cannot be displayed at the moment |
338 | E | Generated SQL instruction is longer than intended in program |
339 | E | Table or view does not contain any fields |
340 | E | Table or view has no entry in the nametab (SAP control table) |
341 | E | Internal error when generating the explain plan |
342 | E | Error when generating an auxiliary program |
343 | E | Not necessary to build matchcode records |
344 | E | Not possible to start sapmaco in the background for matchcode object & |
345 | E | Error occurred when running sapmaco in the background for & -> long text |
348 | E | Matchcodes are not supported in Unicode systems (see long text) |
349 | E | Matchcodes no longer supported (-> Long text) |
350 | E | Lock object & created |
351 | E | Table & not found |
352 | E | Lock object & is not active |
353 | E | Lock object & could not be generated |
354 | E | Lock mode & not allowed |
355 | E | Caution: Function modules contain reference structures |
356 | E | No base tables for lock object & found |
357 | E | No foreign key fields were found for field &-& |
358 | E | Field &-& could not be found as lock argument |
359 | E | Function module & already exists and is locked |
360 | E | Function module & already exists and was not deleted |
361 | E | Function group & is locked |
362 | E | Function block & could not be generated |
363 | E | Report & could not be found |
364 | E | The function groups &Q, &0,...,& are already full |
365 | E | Generated function groups for lock objects cannot be changed |
366 | E | XPRA XDDENQAC: |
367 | E | Application: Basis Client: * |
368 | E | Function modules for lock object & could not be generated |
370 | E | ********* Dependencies table change<-> views *** PROG RADVIDEP |
371 | E | Table type change not allowed for base table of view & |
372 | E | Field &-& is still being used as a view field in view & |
373 | E | Field &-& is still being used in selection condition/join of view & |
374 | E | Adjust type/length/decimal places of view field &-& |
375 | E | Adjust data element of view field &-& |
376 | E | Adjust selection condition of view & to type change |
385 | E | Activation caused by view & |
386 | E | &2 must be a maintenance view for view variant &1 |
391 | E | Standard append & for view & already exists |
392 | E | Standard name & for append view for view & is not allowed |
393 | E | Standard name & for append view for view & is already assigned |
394 | E | Editing of the append view for view & was terminated |
395 | E | Define a name for the append view |
400 | E | View checker for VIEW & started |
401 | E | View & is not in the ABAP Dictionary |
402 | E | View & is not created at database level |
403 | E | View definitions in the ABAP Dictionary and database are not consistent |
404 | E | View definition from the database could not be read |
405 | E | Syntax of the view definition on the database is unknown |
406 | E | Error from consistency layer (& - &) |
407 | E | Undefined entry '&' in & |
408 | E | Problems reading the joins from DD05P |
409 | E | Number of fields in view differs from number in SELECT statement. |
410 | E | View definitions at DD and DB level are consistent |
411 | E | View uses different tables at DD and DB level |
412 | E | View uses different fields at DD and DB level |
413 | E | JOIN conditions at DD and DB level are different |
414 | E | Different selection conditions at DD and DB level |
415 | E | Compare active version with the database |
416 | E | Compare revised version with the database |
419 | E | ******* View check for VIEW & complete ****** |
420 | E | Version management for object type & is not allowed here. |
440 | E | Check matchcode objects for consistency |
441 | E | Error when checking matchcode object (&) |
442 | E | Naming convention vor & violated |
443 | E | No root table defined for matchcode object & |
444 | E | Table &2 used in matchcode object &1 does not exist in the DD |
445 | E | No fields defined for matchcode object & |
446 | E | Field &-& does not exist |
450 | E | Convert IDs of matchcode object & |
451 | E | Matchcode object & and its IDs successfully converted |
452 | E | Warning/error in conversion of matchcode object & with IDs |
455 | E | Runtime object deleted for matchcode object & |
456 | E | Error when deleting runtime object matchcode object & |
457 | E | Runtime object deleted for matchcode ID &-& |
458 | E | Error when deleting runtime object matchcode ID &-& |
461 | E | Incorrect entry for matchcode conversion program & & & & |
462 | E | Utility function modules deleted (matchcode object &) |
463 | E | Error in deleting utility function modules (MC object &) |
464 | E | Function module MC_UPDATE_& deleted |
465 | E | Error when deleting function module MC_UPDATE_& |
466 | E | Function module MC_UPDATE_& updated for ID &_& |
467 | E | Error when updating function module MC_UPDATE_& ID &_& |
468 | E | Utility function module generated (matchcode object &) |
469 | E | Error when generating utility function modules (MC object &) |
470 | E | Generate matchcode records for matchcode object & and IDs |
471 | E | Matchcode records for matchcode object & and IDs constructed |
472 | E | Function module MC_UPDATE_& was generated |
473 | E | Error when generating the function module MC_UPDATE_& |
474 | E | No active version of matchcode ID &-& |
475 | E | Runtime object for matchcode object & was created |
476 | E | Runtime object was created for matchcode ID &-& |
477 | E | & & & is entered for background conversion |
478 | E | & & & for background conversion already entered |
479 | E | No physical pool created for matchcode object & |
480 | E | Function module MC_CREATE/UPDATE/DELETE_& not generated -> long text |
504 | E | Join fields &1-&2 and &3-&4 come from the same table |
505 | E | Define foreign key &-& for join operation correctly |
506 | E | Inconsistency in reference field for &-& |
507 | E | & & activated |
508 | E | & & could not be activated (see log) |
509 | E | Search help & not inherited: Basis field &-& missing in view |
510 | E | A view with the name & already exists |
511 | E | Primary table changed. Dependent elements will be deleted |
512 | E | & & is not active |
513 | E | Join views are always read-only |
514 | E | Help views are always read-only |
516 | E | A matchcode object with the name & already exists |
517 | E | Â lock object with the name & already exists |
518 | E | A table with the name & already exists |
520 | E | & & currently locked by user & |
521 | E | No authorization for & & |
522 | E | Enter a view type |
523 | E | Database views should contain only transparent tables |
524 | E | View contains more than one table |
525 | E | View & was deleted in the database |
526 | E | View & was created in the database |
527 | E | View & was converted in the database |
528 | E | Database function was not performed (see log) |
530 | E | & & is being processed by & |
531 | E | & & is new and is being processed by & |
532 | E | An error occurred when deleting view $ in the database |
533 | E | An error occurred when creating view & in the database |
534 | E | An error occurred when converting view & in the database |
535 | E | Data element does not fit type/length of base fields |
536 | E | Domain for data element & conflicts with base field |
537 | E | Specify valid data element |
538 | E | Domain for &-& has changed |
539 | E | Changed data element for &1-&2 was accepted for view field &3 |
540 | E | & & saved |
541 | E | Chosen tables and relations saved |
542 | E | Fields were saved |
543 | E | Required key fields transferred automatically |
544 | E | Tables changed. Field selection adapted accordingly |
545 | E | & & already saved |
546 | E | Table & is either not active or inconsistent |
547 | E | Tables and relationships already saved |
548 | E | Key fields proposed |
549 | E | No fields chosen. Saving not possible |
550 | E | Inconsistency found in fields. (Please correct.) |
551 | E | & & reset |
552 | E | The key fields of a database view must be kept together at the start |
553 | E | Views of type & are no longer supported. |
554 | E | View allows read-only access only. Maintenance not possible. |
555 | E | & & deleted |
556 | E | All dependent elements deleted |
557 | E | & & could not be deleted (log) |
558 | E | 'Display using Data Browser only' was set automatically |
559 | E | Restriction has no effect on primary table (see long text) |
560 | E | Field &-& does not exist |
561 | E | Table & does not belong to view & |
562 | E | Define an operator |
563 | E | Enter a continuation line |
564 | E | Define a condition for link & |
565 | E | Selection condition saved |
566 | E | Selection condition already saved |
567 | E | Correct entry in the continuation line |
568 | E | Enter a table name |
569 | E | Enter a field name |
570 | E | Define an 'AND' or 'OR' link |
571 | E | OR links only permitted for the same field |
572 | E | AND and 'OR' are not allowed in a continuation line |
573 | E | Correct the text constant |
574 | E | Constants must be enclosed in '...' |
575 | E | Correct number of constants for operator & |
576 | E | Enter a text literal or numeric constant |
577 | E | Please correct the numeric constant |
578 | E | Enter a text literal as a constant |
579 | E | Field & is not contained in MC object & |
580 | E | Enter the base field in full |
581 | E | Enter a name for the view field |
582 | E | Field & was copied to the selection condition |
583 | E | Enter a data element |
584 | E | Data element does not exist |
585 | E | Field &-& does not belong to one of the base tables |
586 | E | Entry of FORM routine and base field not allowed |
587 | E | Already saved |
588 | E | Restrictions on fields with data type & not allowed |
589 | E | Operator not yet supported |
590 | E | Target field may only be assigned once |
591 | E | Select a target field |
592 | E | Define a lock mode |
593 | E | Please assign a name to the lock argument |
594 | E | Lock object names should begin with 'E' |
595 | E | Table & is not contained in lock object & |
596 | E | Name & for lock objects not allowed |
600 | E | System error occurred during lock management |
601 | E | Object requested is currently locked by user & |
602 | E | The requested object is locked by another transaction |
603 | E | Lock table overflow |
604 | E | Own lock is no longer set for object requested |
610 | E | Nametab inconsistency for matchcode ID &-& |
611 | E | SQL error & occurred when deleting pooled table & |
612 | E | Pooled table & successfully deleted |
613 | E | Internal error occurred in function module & |
614 | E | No adjustment of matchcode objects necessary |
615 | E | Matchcode object & successfully adjusted |
616 | E | Error occurred when adjusting matchcode object & |
619 | E | Transparent matchcode IDs can no longer be created -> long text |
620 | E | Matchcode ID was migrated successfully |
621 | E | Search help & was already migrated |
622 | E | Search help & was not migrated |
623 | E | & search helps successfully created or enhanced |
624 | E | Search help & could not be created due to TADIR problem & |
625 | E | Matchcode ID &-& could not be migrated due to missing output field |
626 | E | Edit search help & (-> long text) |
627 | E | No enhanced SAP matchcodes exist |
628 | E | % extended SAP collective search helps are included in the correction |
629 | E | Creation of the request for SAP collective search helps failed |
630 | E | Request & created for extended SAP collective search helps |
631 | E | Release of request for extended SAP collective search helps failed |
635 | E | View logging: active nametab header could not be read |
636 | E | View logging: inactive nametab header could not be read |
637 | E | View logging: active nametab could not be read |
638 | E | View logging: active nametab could not be written |
639 | E | View logging: active nametab header was not written |
640 | E | View logging: inactive nametab header was not written |
650 | E | Consistency check for & & |
651 | E | & & is consistent |
652 | E | & & is not consistent |
653 | E | Activate lock object & |
654 | E | Check lock object & |
655 | E | Lock object & is consistent |
656 | E | Lock object & is not consistent |
659 | E | Lock object & was activated without generating the function modules |
660 | E | Lock object & activated |
661 | E | Lock object & not activated |
662 | E | & & not found |
663 | E | Data element & not found |
664 | E | Domain & not found |
665 | E | Table & already exists. Please choose another name |
666 | E | View structure & could not be activated |
667 | E | View structure & was activated |
668 | E | View structure & was created |
669 | E | View type not allowed |
670 | E | Activate & & |
671 | E | Activation currently locked by user & |
672 | E | & & does not contain fields |
673 | E | & & could not be read |
674 | E | Selection program & generated |
675 | E | Selection program & could not be generated |
676 | E | Relationship structure of & & inconsistent |
677 | E | Required field &-& missing |
678 | E | ENQUEUE functions could not be generated |
679 | E | Function module & in function group & generated |
680 | E | Projection views may not contain more than one table |
681 | E | View change. Database view & must be converted |
682 | E | View & does not yet exist in the database |
683 | E | Relationship &-& for table & does not exist |
684 | E | Error from database interface: (& &-&) |
685 | E | View & still exists in the database |
686 | E | ENQUEUE functions could not be deleted |
687 | E | Entry 'Convert DB view &' made for background run |
688 | E | Entry 'Generate DB view &' made for background run |
689 | E | Entry 'Delete DB view &' made for background run |
690 | E | Delete $ $ |
691 | E | & & deleted |
692 | E | & & not deleted |
693 | E | Delete matchcode ID &-& |
694 | E | Matchcode ID &-& deleted |
695 | E | Matchcode ID &-& was not deleted |
696 | E | Delete matchcode object & |
697 | E | Matchcode object & was not deleted |
698 | E | Matchcode object & deleted |
699 | E | Not possible to enter function & for background |
700 | E | Partial foreign key not allowed with customizing and help views |
701 | E | Invalid foreign key dependency for help views |
702 | E | Incorrect selection condition (& & & &) |
703 | E | Base table & was included more than once |
704 | E | No fields were defined for view $ |
705 | E | Key fields are not together at the beginning of the view |
706 | E | & is not a view (aggregate type: &) |
707 | E | Field name cannot be changed for view type P |
708 | E | Selection conditions are ignored for projection views |
709 | E | Base tables of type & not permitted for this view type |
710 | E | Base tables of type & not permitted |
711 | E | Field &-& of the selection conditions was not found |
712 | E | Selection condition not permitted for client |
713 | E | &-& is not a semantic foreign key |
714 | E | Cardinality & of the foreign key &-& is not permitted here |
715 | E | Foreign key &-& is partial |
716 | E | Foreign key &-& contains a constant |
717 | E | Foreign key &-& refers to a SYST-field |
718 | E | Foreign key &-& (reference to external field) |
719 | E | Foreign key &-& (transitive reference to external field) |
720 | E | Selection program & was changed manually |
721 | E | View field &-& (view type does not permit data elements to be changed) |
722 | E | View field &-& (domains of the data elements not equal) |
723 | E | View & could not be read |
724 | E | Access error when reading view & |
725 | E | Do not define a link for the last selection condition |
726 | E | View must be created in the database |
727 | E | View must be deleted in the database |
728 | E | View must be deleted from the database and created again |
729 | E | Key field &-& missing. Specify maintenance status 'read only'. |
730 | E | Join from & to & not defined with foreign key |
731 | E | Required field &-& is not a key field |
732 | E | All fields are evaluated as key field |
733 | E | Invalid foreign key dependency for lock objects |
734 | E | Selection condition & for field &-& not allowed |
735 | E | The view ignores client-dependency of the base tables |
736 | E | Not all the base tables are linked with join conditions |
737 | E | Invalid type in join &-& - &-& |
738 | E | Activate view & |
739 | E | Check view & |
740 | E | View & was activated |
741 | E | View & is consistent |
742 | E | View & was not activated |
743 | E | View & is not consistent |
744 | E | You do not have authorization for the database modification |
745 | E | The delivery classes of the view and the primary table do not agree |
746 | E | Field & is a language field. Check usage in key |
747 | E | View field &-& (type not consistent with base field) |
748 | E | View field &-& (data element not adjusted to base field) |
750 | E | Field &-& (Type conflict in selection condition) |
751 | E | Field &-& (selection condition for type & not allowed) |
752 | E | Field &-& (do not specify integer constants in apostrophes) |
753 | E | Field &-& (selection condition not allowed for SY field) |
754 | E | Selection condition &-&: Apostrophes are added |
755 | E | Joins must be defined with foreign key |
756 | E | Field &-& from join condition does not exist |
757 | E | Selection/join from external field &-& |
758 | E | Field &-& does not belong to a base table |
759 | E | Join for field &-& uses an SY field |
760 | E | Field &-& for transparent implementation inserted |
761 | E | View field &1 missing in union &2 |
762 | E | View field & (data element or type/length different in union) |
763 | E | Key field &1-&2 missing |
764 | E | Type conflict in join &-& - &-& |
765 | E | Field specification with * and - only allowed for DB views |
766 | E | Key field & of primary table & missing |
767 | E | Specify at least one base table |
768 | E | Cannot expand or collapse line |
769 | E | Selection condition for &-& contains lowercase |
770 | E | Buffering only possible for database views |
771 | E | Technical settings are deleted upon activation |
772 | E | Not possible to update buffering flag for & |
773 | E | Maximum number of buffered views for base table & exceeded |
774 | E | Link the selection conditions with AND or OR |
775 | E | Operator & is not allowed in a selection condition. |
776 | E | Append views are only allowed for database views and projection views |
777 | E | Field groups are only permitted for database and projection views |
778 | E | Field &: Position relative to Basis table cannot be exchanged |
780 | E | Check to ensure ABAP Dictionary views consistent with database views |
781 | E | View & is not consistent in the fields with database view |
782 | E | Selection conditions for view & are not consistent with database view |
790 | E | Rename statements generated using & |
791 | E | Could not generate rename statements using & |
792 | E | Generated create statements for view & |
793 | E | Could not generate create statements for view & |
794 | E | Generated statements for RENAME TABLE/CREATE VIEW & |
795 | E | Modeflaf 'V' noted in runtime object |
796 | E | Mode flag 'V' could not be set in runtime object |
797 | E | Alle dependent views of DB table & are deleted: |
798 | E | Table &: DROP statements could not be generated for all dependent views |
800 | E | Entity views |
801 | E | View & assigned to entity type & |
802 | E | View & saved and assigned to entity type & |
803 | E | Assignment changed: view & now assigned to entity type & |
804 | E | Assignment of view $ to entity type $ deleted |
805 | E | View and assignment deleted in view & to entity type & relation |
806 | E | Entity type & is not assigned to a view |
807 | E | View & and assignment to & were deleted logically. |
808 | E | Assignment of view & to entity type & had not yet been saved |
809 | E | View of generalization & accepted and assigned to & |
810 | E | View & is already assigned to entity type & |
811 | E | Error when creating assignment of & to & (TDI01) |
812 | E | No view allocation exists |
813 | E | Error when changing assignment of & to & (TDI01) |
814 | E | Error when deleting assignment of & to & (TDI01) |
817 | E | Entity view & activated. Inheritance error (see log) |
818 | E | Active, but inconsistent with view of generalization |
821 | E | Type & is not allowed when assigning to entity type |
822 | E | Type & only allowed for assigning to entity type |
823 | E | Namespace U_ and 'ENTnnnnnn' only allowed for views to entities |
824 | E | View & is not assigned to an entity type |
827 | E | Assignment deleted, but view & not deleted. Function modules exist |
828 | E | Assignment deleted, but view & not deleted (DB view exists) |
829 | E | Assignment deleted. Error deleting view & |
831 | E | Assigned view & is not active. |
832 | E | Assigned view & is of type & and not operational. |
841 | E | There are several generalizations for view &: |
842 | E | No active generalization for view & |
843 | E | Settings transferred from view/table & |
844 | E | Table & is not a base table of & |
845 | E | Object is assigned to entity & in the data model |
846 | E | This entity has the following specializations: |
850 | E | Error in RDD25UDM (& & & &) |
860 | E | Inherited table & cannot be deleted. |
861 | E | Inherited condition cannot be deleted. |
862 | E | You cannot insert in front of an inherited condition. |
863 | E | You cannot paste in front of an inherited condition. |
864 | E | You cannot select an inherited condition. |
871 | E | Field &-& is inherited and cannot be deleted. |
872 | E | You cannot insert in front of inherited field &-&. |
873 | E | You cannot paste in front of inherited field &-&. |
874 | E | Field &-& is inherited and cannot be selected |
880 | E | INHERIT from gen. &, view & |
881 | E | Bequeath & to &, view & to & |
882 | E | View & is not active. |
883 | E | The primary table of & must occur in &. |
884 | E | Name & for field &-& was replaced by &. |
885 | E | Secondary table & is now the subsequent table of & instead of &. |
886 | E | Prim.tab. & now follow-on table from & |
887 | E | Redundant join field &-& was deleted. |
888 | E | Error reading foreign key &-& |
889 | E | View field & renamed to & due to conflict. |
890 | E | Sec.tab. & now linked via check field & rather than & |
891 | E | Secondary table & is now primary table |
892 | E | Selection of & NOT has priority over & |
893 | E | & disinherited by &, view & by & |
894 | E | Inherited view field & removed |
895 | E | Inherited key field & now separate field |
897 | E | & |
898 | E | & & |
899 | E | & & & & |
990 | E | Log flag successfully initialized in DDNTT |
991 | E | Initialization error with log flag in table DDNTT |
998 | E | Matchcode upgrade with repository switch |
999 | E | Conventional matchcode upgrade |