This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class 5P (Fehlermeldungen fuer Schema-, Zyklus- und Merkmalcheck) is a standard Message Class in SAP ERP and is part of the package PBAS.
Message Class | 5P |
Short Text | Fehlermeldungen fuer Schema-, Zyklus- und Merkmalcheck |
Package | PBAS |
ID | Language | Text |
---|---|---|
000 | D | Regel O.K. |
001 | D | Sternchen-Eintrag (Others-Fall) im variablen Argument fehlt |
002 | D | Verfeinerung fehlt, var. Argument muß folgenden Aufbau haben: & |
003 | D | Wiederholter Ansprung einer Zeile durch die Operation NEXTR bzw. * |
004 | D | Parametrisierung der Operation entspricht nicht der Syntax |
005 | D | Wert bzw. Parameterwert ist nicht numerisch |
006 | D | Operation ist nicht zulässig |
007 | D | Bei der Operation NEXTR steht eine ungültige Folgenummer |
008 | D | Es existiert kein Eintrag mit der durch NEXTR o. * bestimmten Folgenummer |
009 | D | Neue Folgenummer außerhalb des Wertebereichs: '9' ist die letzte Nummer |
010 | D | Aufbau des Arguments fehlerhaft, folg. Gestalt erforderlich: & |
011 | D | Zeile wird nicht angesprungen, als Kommentar kennzeichnen oder löschen |
012 | D | Es gibt mehrere Einträge mit dem gleichen Key |
013 | D | Attribute sind nicht gepflegt |
014 | D | Operation ist nicht vorhanden |
015 | D | Es ist nur die Operation * vorgesehen |
016 | D | Typ der Operation ist verschieden vom Regeltyp |
017 | D | Es treten keine zu dem Regeltyp passenden Operationen auf |
018 | D | Offset- oder Längenangabe überschreiten die Feldlänge |
019 | D | Maskierung eines Parameters ist fehlerhaft |
020 | D | Mehrere Entscheidungsoperationen sind nicht erlaubt |
021 | D | Die Operationen NEXTR bzw. * sind bei diesem Regeltyp nicht erlaubt |
022 | D | Wert bzw. Parameterwert ist nicht alphanumerisch |
023 | D | Es sind nur die Zeichen < = > erlaubt |
024 | D | Es sind nur die Zeichen Y N erlaubt |
025 | D | Ungültige Zeichen in den Parameterwerten, siehe Doku. der Operation |
026 | D | Platz zur Verfeinerung des variablen Arguments reicht nicht aus |
027 | D | Fehler im variablen Argument |
028 | D | Die Operation ist nicht mehr gültig. Verwenden Sie die Operation & |
029 | D | Parameterwert außerhalb des zulässigen Wertebereichs |
030 | D | Neunumerierung der Regel oder Generierung des Prüfprogramms erforderlich |
031 | D | Nach dieser Operation dürfen keine weiteren Operationen stehen |
032 | D | Eintrag fuer Ländergruppierung fehlt in Tabelle T500L |
033 | D | Wiederholter Ansprung bzw. Aufruf einer Regel |
034 | D | Regel nicht vorhanden bzw. nicht erlaubt |
035 | D | Es sind nur die Zeichen + - erlaubt |
036 | D | Es sind nur die Zeichen R I erlaubt |
037 | D | Es sind nur die Zeichen X ' ' erlaubt (' ' nicht im var. Arg. möglich) |
038 | D | Sondercoding für den Check in T52BO gewünscht, aber nicht vorhanden |
039 | D | Parameterausprägung nicht zulässig |
040 | D | Parameter stehen an der falschen Stelle |
041 | D | Die angegebene Zeitart steht nicht in Tabelle T555A |
042 | D | Der angegebene Tagesarbeitszeitplan steht nicht in Tabelle T550A |
043 | D | Der Check für diese Operation ist nicht vorhanden |
050 | D | Fehler in der Struktur der Rechenregel |
200 | D | &: O.K. |
201 | D | &: Übernahme aus dem Standardmandant |
202 | D | &: Verfeinerung fehlt, Gestalt des var. Arg. : & |
203 | D | &: Bei der BREAK-Operation wurde kein gültiges ABAP-Präfix angegeben |
204 | D | &: Bei der BREAK-Operation wurde kein gültiger Benutzername angegeben |
205 | D | &: Es ist nur Regeltyp 'D' oder '*' zulässig |
206 | D | &: Wiederholter Ansprung einer Zeile durch die Operation NEXTR |
207 | D | &: Hochkomma fehlt am Ende des Vergleichswerts |
208 | D | &: Leerzeichen hinter NEXTR, BREAK bzw. Entscheidungsoperation fehlt |
209 | D | &: Felddefinition und Wert passen nicht zusammen |
210 | D | &: Offset-Angabe fehlt oder ist nicht numerisch |
211 | D | &: Längenangabe bei Entsch.operation fehlt, nicht numerisch oder Null |
212 | D | &: Längenangabe zu lang bzw. nicht mit einer Klammer abgeschlossen |
213 | D | &: Operation nicht vorgesehen bzw. falsche Schreibweise der Operation |
214 | D | &: Das '='-Zeichen nach FLDID bzw. Merkmal-Operation fehlt |
215 | D | &: Die BREAK- bzw. Merkmal-Op. ist nicht mit Komma abgeschlossen |
216 | D | &: Bei der Operation NEXTR steht eine ungültige Folgenummer |
217 | D | &: Es existiert keine Zeile mit der durch NEXTR bestimmten Folgenummer |
218 | D | &: Folgenummer außerhalb des Wertebereichs: '9' ist die letzte Nummer |
219 | D | &: Feldname nicht zulässig bzw. Feldname fehlt |
220 | D | &: Offset- und/oder Längenangabe überschreiten die Feldlänge |
221 | D | &: Gepackte Felder nur für Vergleich benutzen. : & |
222 | D | &: Aufbau fehlerhaft, Gestalt des var. Arg. : & |
223 | D | &: Zeile wird nicht angesprungen, als Kommentar kennz. oder löschen |
224 | D | &: Funktionsexit falsch definiert, korrekter Aufbau: &xxxxx(rrrrrrrr), |
225 | D | &: Report & für Funktionsexit existiert nicht |
226 | D | &: Merkmal ist nicht korrekt, siehe Prüfen im Pflegebaum |
230 | D | &: Es gibt mehrere Einträge mit dem gleichen Key |
250 | D | &: Das Untermerkmal & ist nicht als solches gekennzeichnet |
251 | D | &: Für das Merkmal & existiert noch kein Entscheidungsbaum |
252 | D | &: Zuweisung an das Merkmal & ist nicht erlaubt |
253 | D | &: Operation ERROR bei Argument & in & ist nicht erlaubt |
254 | D | &: Bei Merkmal & wird ein Merkmal mehrfach aufgerufen |
255 | D | &: Das durch FLDID angegebene Unter-Merkmal & existiert nicht |
256 | D | &: Feldname & in Merkmal & ist nicht im DDIC vorhanden |
257 | D | &: Das Merkmal & wurde bisher nur gesichert |
258 | D | &: Zuweisung bei Argument & in & fehlt |
259 | D | &: Mehrfache Zuweisung bei Argument & in & |
260 | D | &: Feldname & in & wird nicht in Hauptmerkmal & verwendet |
261 | D | &: Zuweisung bei Argument & in & nicht gültig |
262 | D | &: In Merkmal & kein Platz für Verfeinerung des Arguments |
270 | D | &: Ende des Nummernkreises fuer Merkmalgenerierung erreicht |
271 | D | &: Nummernkreis zur Merkmalgenerierung nicht angelegt |
272 | D | &: Nummernkreisnummer 01 existiert nicht |
273 | D | &: Nummernkreis nicht für interne Nummernvergabe angelegt |
274 | D | E: Der Feldwert darf aus systemtechnischen Gründen nicht Space sein |
276 | D | &: Der Benutzer & sperrt das Merkmal & |
277 | D | &: Interner Systemfehler beim Sperren von Merkmal & |
290 | D | Generierung von Merkmalen |
291 | D | &: Die Struktur & in Merkmal & ist nicht aktiv im Dictionary vorhanden |
294 | D | &: Syntaxfehler beim Generieren: vermutlich zuviele Zeilen im Report |
298 | D | &: Fehler beim Generieren des Reports (GENERATE REPORT) |
300 | D | Debuggingoperation wurde als erster Knoten der Stufe eingeordnet |
301 | D | E: Das Untermerkmal & existiert noch nicht |
302 | D | Merkmal nicht aktivierbar, da das Untermerkmal & nicht gesichert ist |
303 | D | Fehler beim Ändern der Tabelle & |
304 | D | Fehler beim Schreiben in die Tabelle & |
305 | D | Fehler im Merkmal &. Der dritte D-Eintrag fehlt in Tabelle & |
306 | D | Fehler beim Löschen aus der Tabelle & |
307 | D | Keine erneute Sicherung/Generierung, da Merkmalbaum nicht geändert wurde |
308 | D | E: Entscheidungsoperation nicht eindeutig, da Feldwert mehrfach vorkommt |
309 | D | Der Entscheidungsbaum ist fehlerfrei |
310 | D | Das Untermerkmal & hat keinen Rückgabewert für das rufende Merkmal & |
311 | D | Das Feld & in & wird nicht im Hauptmerkmal & verwendet |
312 | D | Das Untermerkmal & ruft sich selber auf |
313 | D | Unvorhersehbarer Fehler beim Generieren, bitte lesen Sie die Langdoku |
314 | D | Merkmal wurde aktiviert |
315 | D | E: Pro Merkmal oder Feldwert darf es nur einen Untermerkmalaufruf geben |
316 | D | Für das Hauptmerkmal & existieren mehrere Rückgaben (siehe Langdoku) |
317 | D | Merkmal hat keine Rückgabewerte. Funktion Sichern ohne Prüfung möglich. |
318 | D | E: Bitte aktivieren Sie zunächst das Untermerkmal & |
319 | D | Report & existiert nicht. Bitte legen Sie ihn an. |
320 | D | E:Das Feld & gehört nicht zu den angekreuzten Feldern der Merkmalstruktur |
321 | D | Bitte wählen Sie zunächst Felder für Entscheidungsoperationen aus. |
322 | D | Es wurde kein Rückgabewert ausgewählt. |
323 | D | Keine Eingabemöglichkeiten für Rückgabewerte vorhanden |
324 | D | Bitte zunächst den Namen eines Hauptmerkmals angeben |
325 | D | Keine Eingabemöglichkeiten vorhanden. Bitte Rückgabewert eingeben. |
326 | D | Rückgabe bitte in der Form |
327 | D | Untermerkmal & existiert noch nicht, kann daher nicht angezeigt werden |
328 | D | Schreiben auf Transportauftrag nicht möglich (siehe Langdokumentation) |
329 | D | Bitte entweder einen Wert angeben oder Vergleichswert space ankreuzen |
330 | D | Rückgabe zu lang für Baumpflege. Bitte lesen Sie die Langdokumentation |
331 | D | Bitte markieren Sie nur Zeilen gleichen Typs |
332 | D | E: Zuweisung an Untermerkmal (&) nicht erlaubt |
348 | D | E: Hier ist nur genau ein Untermerkmalaufruf zulässig |
349 | D | E: Der Feldwert hat nicht den Typ der Felddefinition |
350 | D | Bitte geben Sie den Namen eines Untermerkmals an |
351 | D | E: Merkmal & ist Hauptmerkmal, bitte geben Sie ein Untermerkmal an |
352 | D | Bitte geben Sie einen Programmnamen an |
353 | D | Bitte geben Sie einen gültigen Benutzernamen an |
354 | D | Bitte wählen Sie ein Feld aus oder brechen Sie die Verarbeitung ab |
355 | D | Teilfeldlänge überschreitet Feldgrenze |
356 | D | Die Offsetangabe ist größer/gleich der Gesamtstellenanzahl des Feldes |
357 | D | Die Entscheidungsoperation ist zu lang, bitte lesen Sie den Langtext |
358 | D | Entscheidungsfeld und Vergleichswert oder -feld sind nicht gleich lang |
359 | D | Der gewünschte Knoten/Teilbaum konnte nicht gelöscht werden |
360 | D | Kein Einfügen möglich! Diese Tabelle kann max. 36 Zeilen haben |
361 | D | Bitte geben Sie sowohl Merkmal als auch den Rückgabewert an |
362 | D | Bitte geben Sie sowohl Merkmal als auch einen Programmnamen an |
363 | D | Achtung: Der Sonst-Fall wird nie eintreten |
364 | D | Das Dictionary konnte nicht aufgerufen werden |
365 | D | Kommentar konnte nicht übernommen werden |
366 | D | Der Wert & liegt nicht im erlaubten Intervall |
367 | D | Der Wert & ist unzulässig. Bitte betätigen Sie die Werthilfetaste |
368 | D | Achtung: Überprüfen Sie die abhängigen Knoten und passen Sie sie ggf. an |
369 | D | Entscheidungsfeld und Vergleichsfeld dürfen nicht identisch sein |
370 | D | Offset und Länge für das leere Vergleichsfeld werden gelöscht |
371 | D | Bitte geben Sie ein Entscheidungsoperationsfeld an oder brechen Sie ab |
372 | D | Dieses Feld ist nicht erlaubt. Bitte verwenden Sie die Eingabehilfe |
373 | D | Kommentare werden beim Sichern evtl. gekürzt |
374 | D | Bitte markieren Sie zunächst die Knoten, die Sie ausschneiden möchten |
375 | D | Der Merkmalbaum wurde ohne Prüfung gesichert |
376 | D | Der Merkmalbaum wurde gesichert |
377 | D | Der Knoten unter dem Merkmal darf keine Fehleroperation sein |
378 | D | Auf dieser Hierarchiestufe sind maximal zwei Knoten zulässig |
379 | D | E: Auf einer Hierarchiestufe ist genau eine Debuggingoperation zulässig |
380 | D | Auf dieser Hierarchiestufe darf sich nur ein Knoten befinden |
381 | D | E: Diese Knotenkombination ist hier nicht erlaubt (siehe Langtext) |
382 | D | E: Auf dieser Hierarchiestufe sind nur Rückgabeknoten erlaubt |
383 | D | E: Die abhängigen Knoten dürfen nur >, <, = oder sonst enthalten |
384 | D | E: Entscheidungsoperationen benötigen abhängige Knoten vom Typ Feldwert |
385 | D | E: Der Feldwert ist länger als die Feldlänge der Entscheidungsoperation |
386 | D | E: Die aufsummierten Feldlängen der Entscheidungsoperationen sind zu groß |
387 | D | E: Knoten vom Typ Feldwert müssen einen abhängigen Knoten haben |
388 | D | E: Das Knotenkind eines Knotens darf nicht vom selben Typ sein |
389 | D | Der Wurzelknoten darf weder ausgeschnitten noch kopiert werden |
390 | D | E: Es können nur 36 Knoten derselben Hierarchiestufe gespeichert werden |
391 | D | E: Hier sind nur Knoten vom Typ Rückgabe oder Programmaufruf erlaubt |
392 | D | E: Das Rootknotenkind darf nicht vom Typ Error, Feldwert od. Root sein |
393 | D | E: Knoten vom Typ Rückgabe dürfen keine Kinder oder Geschwister haben |
394 | D | E: Knoten vom Typ Rückgabe dürfen keine Kinder haben |
395 | D | E: Dieser Knoten darf weder Kinder noch Geschwister haben |
396 | D | E: Knoten vom Typ Programmaufruf dürfen keine Kinder haben |
397 | D | E: An dieser Stelle darf keine Debuggingoperation stehen |
398 | D | E: Eine Debuggingoperation benötigt einen Geschwisterknoten |
399 | D | & Schema bereits generiert |
400 | D | & Schema O.K. |
401 | D | & Pflegen Sie bitte die Attribute des Schemas & |
402 | D | & Programmklasse von Schema & paßt nicht zum Hauptschema |
403 | D | & Ländergruppierung von Schema & paßt nicht zum Hauptschema |
404 | D | & Das Schema & enthält keine Funktionen |
405 | D | & Verwenden Sie statt der Funktion & die Funktion & |
406 | D | & Die Funktion & ist nicht zulässig |
407 | D | & Die Funktion & ist nicht vorhanden |
408 | D | & Das Schema & existiert nicht |
409 | D | & Die Funktion & erfordert Parameter & |
410 | D | & Für Funktion & ist Parameter & unzulässig |
411 | D | & Die Funktion & hat einen falschen Wert bei Parameter & |
412 | D | Unterschema &: Die bei Funktion & angegebene Regel & existiert nicht |
413 | D | & Der bei Funktion & angegebene Regelansprung & ist falsch |
414 | D | & Die bei Funktion & angeg. Verarb.klasse & existiert nicht |
415 | D | & Die bei Funktion & angeg. Auswert.klasse & existiert nicht |
416 | D | & Verarbeitungsblock & befindet sich nicht im Hauptschema & |
417 | D | & Der Report zur Prüfung von Schemen der Zeitwirtschaft existiert nicht |
418 | D | & Der Prüfreport für Personalrechenschemen mit Modif. & existiert nicht |
419 | D | & Die korrespondierende Funktion zu & befindet sich in Schema & |
420 | D | & Beginn zu Funktion & oder Ende zu Funktion & fehlen |
421 | D | & Beginn zu Funktion & fehlt |
422 | D | & Ende zu Funktion & fehlt |
423 | D | & Vor Verarbeitungsblock & muß das Ende zu Funktion & stehen |
424 | D | & Außerhalb des Verarbeitungsblocks & darf keine Funktion stehen |
425 | D | & Verarbeitungsblock & ist falsch eingereiht |
426 | D | & Das Schema & ist nicht ausführbar |
427 | D | & Keine Leseberechtigung für Cluster PS / PT |
428 | D | & Keine Schreibberechtigung für Cluster PS / PT |
429 | D | & Bei Abrechnung+Auswertung muß Funktion & Parameter & haben |
430 | D | & Bei Funktion & Parameter & nur für Abrechnung+Auswertung verwenden |
431 | D | & Schema enthält & Funktionen, Max. & zulässig |
432 | D | & Rekursiver Aufruf von Schema & unzulässig |
433 | D | Bitte wählen Sie eine Struktur oder ein Feld aus |
434 | D | Beginn oder Ende der Schleife XPA LOOP - XPA ENDL fehlt in diesem Schema |
435 | D | XPA LOOP (in Schema &2) bevor die vorhergehende Schleife geschlossen ist |
490 | D | Löschung der Cluster PS und PT auf der Datei PCL2 |
491 | D | Anzahl der gelesenen Sätze..... & |
492 | D | Anzahl der gelöschten Sätze.... & |
600 | D | Rechenregel &1: Die Tabelle &2 hat keine Komponente &3 |
000 | E | 000 to 999 Area reserved for error messages for cycle check |
001 | E | Asterisk entry (others fall) missing in variable key |
002 | E | Detailed definition missing, variable key must have following layout: & |
003 | E | Repeated access of line using operation NEXTR or * |
004 | E | Parametrization of operation does not match syntax |
005 | E | Value or parameter value is not numeric |
006 | E | Operation does not exist |
007 | E | There is an invalid sequential number for operation NEXTR |
008 | E | There is no entry with the sequential number determined by NEXTR or * |
009 | E | New seq. no. is not included in the set of values: '9' is the last number |
010 | E | Layout of the table key is incorrect, the following is required: & |
011 | E | Line is not accessed, mark as a comment or delete |
012 | E | There are several entries with the same key |
013 | E | Attributes have not been maintained |
014 | E | Operation has not been entered in table 52A0 |
015 | E | Only the operation * exists |
016 | E | Type of operation is different from rule type |
017 | E | No operations occur that are compatible with the rule type |
018 | E | Offset or length entry exceeds the field length |
019 | E | Masking of a parameter is incorrect |
020 | E | Several decision operations are not allowed |
021 | E | The operations NEXTR or * are not allowed for this rule type |
022 | E | The value or parameter value is not alphanumeric |
023 | E | Only the characters < - > are allowed |
024 | E | Only the characters Y N are allowed |
025 | E | Invalid characters in the parameter values - refer to operation docu |
026 | E | Insufficient space for detailed definition of the variable key |
027 | E | Error in variable key |
028 | E | The operation is no longer valid - please use operation & |
029 | E | Parameter value not included in permitted set of values |
030 | E | Renumber the rule or generate the check program |
031 | E | No further operations may come after this operation |
032 | E | Entry for country grouping missing in table T500L |
033 | E | Repeated accessing or calling of a rule |
034 | E | Rule does not exist or is not allowed |
035 | E | Only the characters + - are allowed |
036 | E | Only the characters R I are allowed |
037 | E | Only the characters X ' ' are allowed (' ' not possible in variable key) |
038 | E | Special coding desired but does not exist for the check in T52BO |
039 | E | No entry in T52BO for these parameters of the operation |
040 | E | Incorrect parametrization of the operation (space check) |
041 | E | The specified time type is not in table T555A |
042 | E | The specified daily work schedule is not in table T550A |
043 | E | The check for this operation does not exist |
050 | E | Error in calculation rule structure |
200 | E | &: O.K. |
201 | E | &: Transfer from the standard client |
202 | E | &: More specific definition required for variable key: & |
203 | E | &: No valid ABAP prefix has been specified for the BREAK operation |
204 | E | &: No valid user name has been specified for the BREAK operation |
205 | E | &: Only the rule type 'D' or '*' is allowed |
206 | E | &: Repeated line access possible via operation NEXTR |
207 | E | &: Inverted comma is missing at end of comparison value |
208 | E | &: Blank character is missing after NEXTR, BREAK, or decision operation |
209 | E | &: Field definition and value are not compatible |
210 | E | &: Offset specification is missing or is not numeric |
211 | E | &: Length specification for decision op. missing, not numeric, or zero |
212 | E | &: Length specification is too long or does not end with a bracket |
213 | E | &: Operation does not exist or has been misspelled |
214 | E | &: The '-' sign is missing after FLDID or feature operation |
215 | E | &: The comma is missing at the end of the BREAK or feature operation |
216 | E | &: The operation NEXTR has an invalid sequence number |
217 | E | &: No line exists with the sequence number determined by NEXTR |
218 | E | &: Sequence no. is not within the set of values: '9' is the last number |
219 | E | &: Field name is not allowed or is missing |
220 | E | &: Offset and/or length specification exceeds the field length |
221 | E | &: Use packed fields for comparison only: & |
222 | E | &: Layout incorrect, mark or delete organization of var. key: & |
223 | E | &: Line cannot be accessed, mark as comment or delete |
224 | E | &: Function exit incorrectly defined. Define as &xxxxx(rrrrrrrr) |
225 | E | &: No report & for function exit |
226 | E | &: Feature is not correct, see check in tree maintenance |
230 | E | &: There are several entries with the same key |
250 | E | &: Subfeature & has not been marked as such |
251 | E | &: A decision tree does not as yet exist for feature & |
252 | E | &: Assignment to feature & is not allowed |
253 | E | &: Operation ERROR for key & in & is not allowed |
254 | E | &: A feature is called several times for feature & |
255 | E | &: The subfeature & specified via FLDID does not exist |
256 | E | &: Field name & in feature & does not exist in DDIC |
257 | E | &: Feature & has only been saved |
258 | E | &: Assignment is missing for key & in & |
259 | E | &: Multiple assignment for key & in & |
260 | E | &: Field name & in & is not used in main feature & |
261 | E | &: Assignment for key & in & is invalid |
262 | E | &: Feature & has no space for addt'l key characters |
270 | E | &: End of number range reached for feature generation |
271 | E | &: Number range for feature generation has not been created |
272 | E | &: Number range no. 01 does not exist |
273 | E | &: Number range has not been created for internal number assignment |
274 | E | E: For system reasons, the field value cannot be a space |
276 | E | &: User & is blocking feature & |
277 | E | &: Internal system error when locking feature & |
290 | E | Generating features |
291 | E | &: Structure & in feature & is not active in the Dictionary |
294 | E | &: Syntax errors during generation: report possibly has too many lines |
298 | E | &: Error during report generation (GENERATE REPORT) |
300 | E | Debugging operation assigned as first node in level |
301 | E | E: Subfeature & does not exist yet |
302 | E | System cannot generate feature because subfeature & has not been saved |
303 | E | Error when changing table & |
304 | E | Errors while writing in table & |
305 | E | Errors in feature &. The third D-entry is missing in table & |
306 | E | Error while deleting from table & |
307 | E | No new saving/generation because feature tree was not changed |
308 | E | E: Decision operation not unique because field value occurs several times |
309 | E | Decision tree is error-free |
310 | E | Subfeature & does not have any return value for feature & |
311 | E | Field & in & is not used in main feature & |
312 | E | Subfeature & calls itself up |
313 | E | Unforeseeable errors while generating, please read the long text |
314 | E | Feature was generated |
315 | E | E: Only one subfeature call-up permitted per feature or field value |
316 | E | No more returns exist for main feature & (see long text) |
317 | E | Feature contains no return values. Saving without examination possible. |
318 | E | E: Activate subfeature & first |
319 | E | Report & does not exist. Please create it. |
320 | E | E: Field & does not belong to the fields flagged in the feature structure |
321 | E | Please choose fields for decision operations |
322 | E | No return value has been chosen |
323 | E | No entry possibilities available for return value |
324 | E | Please entre the name of the main feature |
325 | E | No possible entries available. Enter the return value. |
326 | E | Enter the return value as |
327 | E | Subfeature & does not exist yet and can therefore not be displayed |
328 | E | Writing to transport request not possible (see long documentation) |
329 | E | Either specify a value or mark the comparison value space |
330 | E | Return too long for tree maintenance. Read the long text |
331 | E | Select rows of the same type only |
349 | E | E: Field value does not have field definition type |
350 | E | Please enter the name of the subfeature |
351 | E | E: Feature & is the main feature, please enter a subfeture |
352 | E | Enter a program name |
353 | E | Specify a valid user name |
354 | E | Please choose a field or terminate processing |
355 | E | Subfield length exceeds field limit |
356 | E | Offset entered is greater than/same as total job number of field |
357 | E | Decision operation is too long, please read the long text |
358 | E | Decision field and comparative value or field are not of the same length |
359 | E | The desired nodes/tree structure cannot be deleted |
360 | E | No insertion possible! This table can have a maximum of 36 lines |
361 | E | Please enter feature and return value |
362 | E | Please enter feature and program name |
363 | E | Note: the alternative will never occur |
364 | E | Dictionary cannot be called up |
365 | E | Comment cannot be transferred |
366 | E | Value & is not in permitted interval |
367 | E | Value & is not permitted. Please press the possible-entries button |
368 | E | Warning: Check the dependent nodes and make any necessary adjustments |
369 | E | Decision field and comparison field cannot be identical |
370 | E | Offset and length for the empty comparison field will be deleted |
371 | E | Please enter decision operations field or terminate |
372 | E | This field is not permitted. Please use the input help |
373 | E | Comments could be shortened when saved |
374 | E | Please flag the nodes that you want to cut |
375 | E | The feature tree is saved without being examined |
376 | E | Feature tree is saved |
377 | E | The node under the feature cannot be an error operation |
378 | E | A maximum of two nodes are permitted on this hierarchy level |
379 | E | E: A debugging operation is permitted on a hierarchical level |
380 | E | Only one node is allowed on this hierarchy level |
381 | E | E: This node combination is not permitted here (see long text) |
382 | E | E: Only return nodes are permitted on this hierarchical level |
383 | E | E: Dependent nodes must only contain >, <, -, or other |
384 | E | E: Decision operations necessitate dependent nodes from the field value |
385 | E | E: The field value is longer than the decision operation field length |
386 | E | E: The total field lengths of the decision operations are too great |
387 | E | E: Field value nodes must have dependent nodes |
388 | E | E: A child of a node can not be of the same type |
389 | E | Cutting or copying the root node is not permitted |
390 | E | E: Only 36 nodes from the same hierarchy level can be saved |
391 | E | E: Only return nodes and program call-up nodes are permitted here |
392 | E | E: The root child can not be an error, field value or root |
393 | E | E: Return nodes are not allowed to have children or siblings |
394 | E | E: Return nodes are not allowed to have children |
395 | E | E: This node is not allowed to have children or siblings |
396 | E | E: Program call-up nodes cannot have any children |
397 | E | E: Debugging operations are not allowed at this point |
398 | E | E: A debugging operation requires same-level nodes |
399 | E | & schema already generated |
400 | E | & schema O.K. |
401 | E | & Please maintain the attributes for schema & |
402 | E | & Program class for schema & is incompatible with main schema |
403 | E | & country grouping for schema & is incompatible with main schema |
404 | E | & Schema & contains no functions |
405 | E | & Instead of using function &, please use function & |
406 | E | & Function & is not allowed |
407 | E | & Function & does not exist |
408 | E | & Schema & does not exist |
409 | E | & Function & requires parameter & |
410 | E | & For function &, parameter & is not allowed |
411 | E | & Function & has an incorrect value for parameter & |
412 | E | Subschema &: Rule &2 entered in function &1 does not exist |
413 | E | & With regard to function &, specified rule access & is incorrect |
414 | E | & With regard to function &, specified processing class & does not exist |
415 | E | & With regard to function &, specified evaluation class & does not exist |
416 | E | & Processing block & is not in main schema & |
417 | E | & The report for checking schemas in time management does not exist |
418 | E | & check report for pers.calc.schemas with modifier & does not exist |
419 | E | & The corresponding function for & is in schema & |
420 | E | & Beginning of function & or end of function & missing |
421 | E | & Beginning of function & missing |
422 | E | & End of function & missing |
423 | E | & Processing block & must be preceded by the end of function & |
424 | E | & A function must not be outside processing block & |
425 | E | & Processing block & is in the wrong order |
426 | E | & Schema & cannot be performed |
427 | E | & No read authorization for cluster PS / PT |
428 | E | & No write authorization for cluster PS / PT |
429 | E | & Function & must have parameter & for accounting and evaluating |
430 | E | & With regard to function &, use parameter & for acct. and eval. only |
431 | E | & schema contains $ functions: max. & allowed |
432 | E | & recursive call of schema & is not permitted |
433 | E | Select a structure or a field |
434 | E | Start or end of the XPA LOOP - XPA ENDL loop is not in this schema |
435 | E | XPA LOOP (in schema &2) before the previous loop is closed |
490 | E | Delete clusters PS and PT from file PCL2 |
491 | E | Number of records read......... & |
492 | E | Number of records deleted...... & |
493 | E | Conversion of customer schemas: comment is not dependent on language |
494 | E | In client & there is not comment for schema & |
495 | E | In client & for schema & the comment language & was used |
600 | E | Calculation rule &1: table &2 does not have a &3 component |