This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class KK () is a standard Message Class in SAP ERP and is part of the package KKEK.
Message Class | KK |
Short Text | |
Package | KKEK |
ID | Language | Text |
---|---|---|
000 | D | ********* Fehlermeldungen Einzelkalkulation 000 - 999 ********* |
001 | D | Kostenrechnungskreis & ist nicht vorhanden |
002 | D | Musterkalkulation & & ist schon vorhanden |
003 | D | Musterkalkulation & & ist nicht vorhanden |
004 | D | Keine Texte zu Kalk. & & in Sprache & |
005 | D | Musterkalkulation &1 &2 ist nicht vorhanden |
006 | D | Keine Texte zur Vorlage & & in Sprache & |
007 | D | Musterkalkulation &1 &2 ist nicht vorhanden |
009 | D | Musterkalkulation & ist möglicherweise schon archiviert |
010 | D | Kostenart & im KOKRS & am & ist nicht vorhanden |
011 | D | Buchungskreis & ist nicht Kostenrechnungskreis & zugeordnet |
012 | D | Werk & ist nicht dem Buchungskreis & zugeordnet |
013 | D | Zugehörige Kalkulation & & zerstört (Kein Sichern möglich) |
014 | D | Daten Musterkalkulation & & wurden gesichert |
015 | D | Import Kalkulation gescheitert (Systemverantwortlichen benachr.) |
016 | D | Kalkulation & & ist schon vorhanden (Kein Sichern möglich) |
017 | D | Musterkalkulation & & wurde gesichert |
018 | D | Musterkalkulation & ist von Benutzer & gesperrt |
019 | D | Systemfehler: Sperrtabelle läuft über |
020 | D | Interner Fehler: & ist kein zulässiger Aktivitätentyp |
021 | D | Transaktion & kann nicht von der Musterkalkulation behandelt werden |
022 | D | Musterkalkulationsname enthält unzulässige Sonderzeichen |
023 | D | Vorlageauftrag & ist nicht vorhanden |
024 | D | Genau ein Vorlageobjekt eingeben |
025 | D | Vorlageauftrag & ist nicht KOKRS & zugeordnet |
026 | D | Vorlageprojekt & ist nicht vorhanden |
027 | D | Vorlageprojekt & ist nicht KOKRS & zugeordnet |
028 | D | Zum Vorlageauftrag & existiert für das Jahr & keine Kalkulation |
029 | D | Zum Vorlageprojekt & existiert für das Jahr & keine Kalkulation |
030 | D | Zur Vorlage & existiert keine Einzelkalkulation |
031 | D | Werk & ist nicht vorhanden |
032 | D | Buchungskreis & ist nicht vorhanden |
033 | D | Zum Vorlageauftrag & existiert keine Gesamtwertkalkulation |
034 | D | Zum Vorlageprojekt & existiert keine Gesamtwertkalkulation |
035 | D | Kostenart & hat einen unzulässigen Kostenartentyp |
036 | D | Zum Vorlagematerial existiert keine Kalkulation |
037 | D | Buchungskreis oder Werk eingeben |
038 | D | Interner Fehler: Sichern ist nicht möglich |
039 | D | Vorlagekalkulation ist unzulässig |
040 | D | Vorlagekostenträger & ist nicht vorhanden |
041 | D | Vorlagekostenträger & ist nicht KOKRS & zugeordnet |
042 | D | Zum Vorlagekostenträger & existiert keine Kalkulation |
043 | D | Zum Vorlagematerial & existiert keine Kalkulation |
044 | D | Gültige Werte für Kalk.-Datum und/oder Version eingeben |
045 | D | Zum Vorlageverkaufsbeleg & Position & existiert keine Kalkulation |
046 | D | Vorlageverkaufsbeleg & Position & existiert nicht |
047 | D | Kalkulationsschema ist für Muster-/AdHoc-Kalkulationen nicht vorgesehen |
048 | D | Zuerst Kalkulationsschema angeben |
049 | D | Kalkulationsschema angeben |
050 | D | Das Kalkulationsbezugsobjekt & ist unzulässig |
051 | D | Kein Tabelleneintrag in Tabelle & vorhanden |
052 | D | Die Quell- und Zieltabelle haben eine unterschiedliche Anzahl Einträge |
053 | D | Die Schlüssel der Quell- und Zieltabelle sind gleich |
054 | D | Kalkulation mit Schlüssel: & ist nicht vorhanden |
055 | D | Interner Programmfehler: & |
056 | D | Zuschlagsschlüssel & ist im Kalkulationsschema & nicht vorgesehen |
057 | D | Kalkulation konnte nicht selektiert werden |
058 | D | Kalkulation mit Schlüssel & ist mehrfach vorhanden |
059 | D | Kalkulationsrelevante Daten wurden geändert -> bitte Kalkulation anpassen |
060 | D | Für Kalkulationsschema & ist kein Zuschlagsschlüssel vorgesehen |
061 | D | Keine Berechtigung zum Anlegen von Musterkalkulationen im KoKrs & |
062 | D | Keine Berechtigung zum Ändern von Musterkalkulationen im KoKrs & |
063 | D | Keine Berechtigung zum Anzeigen von Musterkalkulationen im KoKrs & |
064 | D | Keine Berechtigung für Berechtigungsobjekt &, Aktivität &, Kokrs & |
065 | D | Objekt &1 / &2 nicht vorhanden |
066 | D | Das Profit Center &1 im Kostenrechnungskreis &2 nicht vorhanden |
067 | D | Die angegebene Einzelkalkulation &1 ist nicht vorhanden |
068 | D | In Kostenrechnungskreis &1 ist Musterkalkulationgruppe &2 nicht zulässig. |
099 | D | *** Meldungen bzgl. Tablecontrol **************************************** |
100 | D | Ausgewählte Spalten wurden fixiert |
101 | D | Die Fixierung der Spalten wurde aufgehoben |
102 | D | Verschobene Spalten können nicht fixiert werden |
103 | D | Spalte(n) markieren |
104 | D | Das Merkmal & ist bereits zugeodnet |
105 | D | Das Merkmal & ist nicht vorhanden |
107 | D | & ist kein gültiger Merkmalsname |
120 | D | interner Fehler: für das Modell & wurde keine HTML-Vorlage gefunden |
121 | D | Das Objekt & ist nicht im Web-Repository vorhanden. |
122 | D | Zu diesem Kalkulationsmodell wurde noch keine HTML-Vorlage gesichert |
150 | D | ********* Fehlermeldungen zur mehrstufigen Einzelkalkulation ************ |
151 | D | Die mehrstufige Einzelkalkulation ist im Pilotstadium |
152 | D | Der Index &1 zur Tabelle &2 ist noch nicht vorhanden |
153 | D | Index ist bereits vorhanden |
154 | D | Index erfolgreich angelegt |
155 | D | Löschen einer Position aus einer maschinellen Kalkulation nicht möglich |
156 | D | Die gewählten Objekte dürfen nicht ineinander eingesetzt werden. |
157 | D | Die mehrstufige Einzelkalkulation erfordert ein WIN32 Frontend |
158 | D | Ein Treecontrol konnte nicht erzeugt werden. |
159 | D | Die Drag-and-Drop-Funktion konnte nicht initialisiert werden. |
160 | D | Programminkonsistenz: Der gesuchte Knoten &1 ist nicht vorhanden. |
161 | D | Fehler bei Kommunikation mit einem Tree Control. |
162 | D | Keine Materialien / Materialkalkulationen gefunden |
163 | D | Materialkalkulation zum Material &1 von Benutzer &2 gesperrt. |
164 | D | Inconsistenter interner Knotentyp. |
165 | D | Es sind Fehlermeldungen aufgetreten. Bitte sehen Sie in das Protokoll. |
166 | D | Die Kalkulation zyklischer Strukturen ist nicht möglich. |
167 | D | Musterkalkulation & nicht gefunden |
168 | D | Kalkulation bereits vorhanden |
169 | D | Positionieren Sie den Cursor auf eine gültige Zeile |
170 | D | Vorlagekalkulation ist fehlerhaft (s. Langtext) -> keine Kopie erstellt |
171 | D | Das Material der Vorlagekalkulation ist konfigurierbar -> keine Kopie |
172 | D | In Musterkalkulation &1 enthaltene Musterkalkulation &2 ohne Position. |
173 | D | Musterkalkulation &1 besitzt keine Kalkulationspositionen. |
174 | D | Werk &1 nicht im Kostenrechnungskreis &2, keine Selektion für dieses Werk |
175 | D | Im Kostenrechnungskreis &1 ist kein entsprechendes Werk vorhanden. |
176 | D | Keine Musterkalkulation zu den Selektionskriterien gefunden |
177 | D | Keine Leistungsarten im Kreis &1 zu den Selektionskriterien gefunden |
178 | D | Mischkalkulation als Vorlage unzulässig -> keine Kopie |
179 | D | Kalk. zu Beschaffungsalternativen als Vorlage unzulässig -> keine Kopie |
180 | D | Kalkulationen zu Kuppelprodukten als Vorlage unzulässig -> keine Kopie |
181 | D | Die Vorlagekalkulation enthält Zyklen und wird daher nicht kopiert. |
182 | D | Die Kalkulationsvariante &1 ist beim Anlegen nicht erlaubt |
183 | D | Bitte setzen Sie zunächst einen Filter im Einzelkalkulationslistbild |
184 | D | Kopieren wurde abgebrochen, Daten bleiben unverändert. |
185 | D | Im Arbeitsvorrat ist kein passender Behälter vorhanden. |
186 | D | Objekt nicht eingefügt, da es in der Struktur schon vorhanden ist. |
198 | D | Positionstypabhängiger Behälter erfordert einen Positionstyp. |
199 | D | Der angegebene Positionstyp &1 ist für Behälter unzulässig. |
200 | D | Zugriff auf Arbeitsvorrat &1 verweigert |
201 | D | Arbeitsvorrat &1 existiert nicht |
202 | D | Arbeitsvorrat bzw. -vorräte konnte(n) nicht gesichert werden |
203 | D | Lesen der angeforderten Arbeitsvorräte mißlungen |
204 | D | Lesen des Inhalts von Arbeitsvorrat &1 mißlungen ->Defaultanzeige |
205 | D | Keine Arbeitsvorräte vorhanden, zu denen Berechtigung vorliegt |
206 | D | Nur &1 der angegebenen Arbeitsvorräte konnte(n) gelöscht werden |
207 | D | Löschen des angegebenen Arbeitsvorrats fehlgeschlagen |
208 | D | Arbeitsvorrat bzw. -vorräte nicht gefunden |
209 | D | Anlegen des Arbeitsvorrats unzulässig |
210 | D | Nicht alle Arbeitsvorräte gefunden |
211 | D | Aktion abgebrochen |
212 | D | Arbeitsvorrat konnte nicht angelegt werden |
213 | D | Arbeitsvorrat ist leer und kann daher nicht bearbeitet werden |
214 | D | Umbenennen des angegebenen Arbeitsvorrats fehlgeschlagen |
215 | D | Sperrfehler für neu anzulegenden Vorrat &1 aufgetreten &2 |
216 | D | Arbeitsvorrat &1 für Schreibzugriff gesperrt. Sichern unmöglich. |
217 | D | Arbeitsvorrats-Sicherung durchgeführt |
218 | D | Arbeitsvorrat wurde angelegt |
219 | D | Arbeitsvorrat wurde kopiert |
220 | D | Arbeitsvorrat wurde umbenannt und aktuell unter dem neuen Namen gesichert |
221 | D | Bitte einen (gültigen) Namen für den Arbeitsvorrat angeben |
222 | D | Inhalt von Arbeitsvorrat &1 konnte nicht gelesen werden |
223 | D | Temporäre und Arbeitsvorräte mit freiem Text (noch) unzulässig |
224 | D | Arbeitsvorrat wurde gelöscht |
225 | D | Kein (zulässiger) Vorrats-Name angegeben -> Arbeitsvorrat nicht erstellt |
226 | D | Nichts gelöscht |
227 | D | Arbeitsvorrat ist leer und kann daher nicht gesichert werden |
228 | D | Arbeitsvorrat ist leer und kann daher nicht kopiert werden |
229 | D | Arbeitsvorrat ist leer und kann daher nicht umbenannt werden |
230 | D | Arbeitsvorrat ist leer und kann daher nicht gelöscht werden |
231 | D | Benutzerkonfiguration zum Arbeitsvorrat wurde gesichert |
232 | D | Löschen nicht möglich, da der Behälter nicht leer ist |
233 | D | Arbeitsvorrat befindet sich bereits in der Anzeige |
234 | D | Sperrfehler für den zu löschenden Arbeitsvorrat &1 aufgetreten |
235 | D | Name des umzubenennenden Arbeitsvorrats und neuer Name sind identisch |
236 | D | Arbeitsvorrat ist leer und kann daher nicht umgewandelt werden |
237 | D | Nichts kopiert |
238 | D | Arbeitsvorrat &1 von Benutzer &2 gesperrt |
239 | D | Vorrat &1 konnte nicht gesperrt werden. Sichern nicht möglich. |
240 | D | Sperrfehler für Arbeitsvorrat &1 aufgetreten. Sichern nicht möglich. |
241 | D | Arbeitsvorrat wurde inzwischen verändert und daher jetzt neu eingelesen. |
242 | D | Bitte erst den Cursor auf einen Behälter im Arbeitsvorrat positionieren. |
243 | D | Bitte einen (gültigen) Behälternamen angeben |
244 | D | Behälter wurde gelöscht |
245 | D | Behälter wurde eingefügt |
246 | D | Einen in dem Arbeitsvorrat noch nicht vorhandenen Behältername angeben |
247 | D | Der Vorrat wurde in der Zwischenzeit von Datenbank gelöscht (s. Langtext) |
248 | D | Kalkulation zu &1 nicht gesichert -> nicht im Arbeitsvorrat gesichert |
249 | D | Der einzige Behälter eines Arbeitsvorrats kann nicht gelöscht werden |
250 | D | **************** Fehlermeldungen Umsetzung Einzelkalkulation ************ |
251 | D | Entweder Auftrag oder Kostenstelle angeben |
252 | D | Es wurden keine Einzelkalkulationsbelege zur Umsetzung gefunden |
253 | D | Keine jahresabhängigen Daten zum Kostenrechnungskreis & & vorhanden |
254 | D | Umsetzung der Einzelkalkulationsbelege ist nicht notwendig |
255 | D | Keine Jahreswerte zur Planversion & im angegebenen Kostenrechnungskreis |
256 | D | Geschäftsjahresvariante & ist nicht vorhanden |
257 | D | Eingegebener & und Auftragskostenrechnungskreis & sind verschieden |
258 | D | Auftrag & ist nicht vorhanden |
259 | D | Kostenstelle & im Jahr & nicht vorhanden |
260 | D | Auftragskostenrechnungskreis & wird zur weiteren Verarbeitung genutzt |
261 | D | Fehler bei Währungsumrechnung: Kalknr. & |
262 | D | Einzelkalkulationsbeleg & wurde erfolgreich umgesetzt |
263 | D | Einzelkalkulationsbeleg & : Fehler bei der Verbuchung |
264 | D | Umsetzung des Einzelkalkulationsbelegs & ist nicht notwendig |
265 | D | Einzelkalkulationsbeleg & ( Nummer aus COKP ) ist nicht vorhanden |
300 | D | ***** Fehlermeldungen RK70K_RC ********* |
301 | D | Kalkulationsvariante & ist nicht zulässig |
302 | D | Interner Fehler: Aktivitätentyp & ist nicht zulässig |
303 | D | Interner Fehler: Inputparameterkombination ist nicht zulässig |
304 | D | Kalkulation & ist schon vorhanden |
305 | D | Kalkulation & ist nicht vorhanden |
306 | D | Die maximale Periodenanzahl(16) ist überschritten |
307 | D | Kalkulationsvariante & ist nicht in Tabelle TCK03 vorhanden |
308 | D | Fehler in Kalkulationssteuertabelle TCK01 |
309 | D | Fehler in Kalkulationssteuertabelle TCK02 |
310 | D | Fehler in Kalkulationssteuertabelle TCK03 |
311 | D | Fehler in Kalkulationssteuertabelle TCK04 |
312 | D | Fehler in Kalkulationssteuertabelle TCK05 |
313 | D | Fehler in Kalkulationssteuertabelle TCK06 |
314 | D | Fehler in Kalkulationssteuertabelle TCK12 |
315 | D | Fehler in Kalkulationssteuertabelle TCK07 |
316 | D | Bewertungvariante der Kalkulation stimmt nicht mit Steuertabelle überein |
317 | D | Kalkulationsvariante & ist für das Bezugsobjekt nicht vorgesehen |
318 | D | Kalkulationsart & ist nicht in Tabelle TCK01 vorhanden |
319 | D | Planungswährung ist nicht vorhanden |
320 | D | Keine Kalkulation zu Musterkalkulation & vorhanden |
326 | D | Bei Ermittlung der Partnernummer ist ein Fehler aufgetreten |
328 | D | Zusatzbedingungen zur Objektselektion werden nicht berücksichtigt |
329 | D | Nur jeweils erster angegebener Objektwert wird berücksichtigt |
330 | D | Rundungsrelevante Nachkommastellen für Mengeneinheit &1 verändert. |
331 | D | Prozeß &1 gehört zum Kostenrechnungskreis &2 |
332 | D | Kostenstelle / Leistungsart im Kostenrechnungskreis &3 nicht vorhanden |
342 | D | Merkmal kann nicht gelöscht werden |
343 | D | Zu löschendes Merkmal wird evtl. in Kalkulationen verwendet -> prüfen |
344 | D | Kundenspezifische Erweiterung ist nicht aktiv |
345 | D | Keine Funktionseinträge vorhanden -> ggf. Template-Customizing überprüfen |
346 | D | Modell in Kalkulation verwendet -> Merkmal nicht löschbar |
347 | D | Unvollständige Ressource - Planungsvorlagen-Verantwortlichen verständigen |
348 | D | Das Merkmal &1 konnte nicht interpretiert werden |
349 | D | Zum Merkmal &1 muß ein Wert eingegeben werden |
350 | D | Das Modell &1 ist nicht vorhanden |
351 | D | Modell &1 wird von Benutzer &2 bearbeitet |
352 | D | Merkmal &1 ist mehrwertig und kann einem Modell nicht zugeordnet werden |
353 | D | Modell &1 ist noch nicht vorhanden oder inkonsistent |
354 | D | Entweder Vorlagekalkulation oder Kalkulationsmodell eingeben |
355 | D | Zuerst ein Kalkulationsmodell eingeben, dann Aktion erneut starten |
356 | D | Neues Modell |
357 | D | Zuerst Modell-Beschreibung eingeben, dann Aktion erneut starten |
358 | D | Zuerst ein Kalkulationsmodell eingeben |
359 | D | Kalkulationsmodell & enthält ungültige Zeichen |
360 | D | EasyCostPlanning-Umgebung - direkter Templatezugriff nicht möglich |
361 | D | Merkmal &1 hat benutzerdef. Datentyp: Verwendung im Modell nicht möglich |
362 | D | Kostenart &1 im Kostenrechnungskreis &2 nicht vorhanden |
363 | D | Merkmal &1 erlaubt Intervallwerte: Verwendung im Modell nicht möglich |
364 | D | Merkmal &1 kann nicht in einem Template verwendet werden |
365 | D | Eingefügtes Modell & führt zu zyklischer Verwendung |
366 | D | Geben Sie den Namen eines Vorlage-Kalkulationsmodells ein |
367 | D | Modell &1 wurde gelöscht |
368 | D | Modell &1 wird noch verwendet und kann nicht gelöscht werden |
369 | D | Modell &1 wurde gesichert |
370 | D | Modell in Kalkulationen verwendet -> ist nicht lösch- bzw. überschreibbar |
371 | D | Ableitungsregeln zum Modell vorhanden -> Modell ist nicht überschreibbar |
372 | D | Der Name des Kalkulationsmodells darf nicht mit einer Zahl beginnen |
373 | D | Der Status &2 des Merkmals &1 ist nicht vorhanden |
374 | D | Merkmal &1 ist nicht freigegeben |
375 | D | Merkmal &1 darf nicht in Kalkulationsmodellen verwendet werden |
376 | D | Modell &1 ist bereits vorhanden |
377 | D | Erforderliche Angabe machen bzw. korrigieren: &1 |
378 | D | Die Kalkulation wurde übernommen |
379 | D | Interner Fehler: Merkmal & ist nicht der Klassenart 051 zugeordnet |
380 | D | Inkonsistenz zwischen dem Kalkulationsmodell und der Klasse |
381 | D | Merkmalsausprägung &1 kann nicht als Menge interpretiert werden |
382 | D | Template &1 nicht vorhanden |
383 | D | Fremdleistung &1 in Werk &2, Einkaufsorganisation &3 nicht vorhanden |
384 | D | Lohnbearbeitung &1 in Werk &2, Einkaufsorganisation &3 nicht vorhanden |
385 | D | Wählen Sie einen anderen Namen für das Zielmodell als den der Vorlage |
386 | D | Kalkulationsmodell &3 wird von &4 gerade für eine Kalkulation benutzt |
387 | D | Stellen Sie die Aktualität von Ableitungsregeln und Eingabeschirm sicher |
388 | D | Kalkulationsmodell ist für diese Templateumgebung nicht zulässig |
389 | D | Pflegen Sie den Klassifizierungsstatus für die Klassenart 051 |
390 | D | Modell wurde angelegt |
391 | D | Modell &1 gehört zu Kostenrechnungskreis &2 |
392 | D | Interner Fehler: Es gibt keine Modellbewertung & |
393 | D | Kalkulation zu groß für Microsoft Excel |
394 | D | Kalkulation über Microsoft Excel erfordert Microsoft Windows |
395 | D | Kalkulation über Microsoft Excel ist generell unzulässig |
396 | D | Vorlagekalkulation wurde mit Microsoft Excel erstellt |
397 | D | Kalkulation wurde mit Microsoft Excel erstellt |
398 | D | Der Verbindungsaufbau zu Microsoft Excel ist mißlungen |
399 | D | ***** Fehlermeldungen SAPMK70D ********* |
400 | D | Fremdwährung(Kopf) eintragen |
401 | D | Währung & ist nicht in & konvertierbar |
402 | D | Positionstyp & ist nicht zulässig |
403 | D | Positionierung außerhalb des zulässigen Bereichs |
404 | D | Kalkulation wurde abgeschlossen von Benutzer & |
405 | D | Systemfehler: RK70K-AKTYP ist nicht in interner Steuertabelle |
406 | D | Bezugsobjekttext ist in Tabelle TKKEX nicht vorhanden |
407 | D | Mengeneinheit & ist nicht in Mengeneinheit & konvertierbar |
408 | D | Texte Kalkulationskopf & & & ist nicht vorhanden |
409 | D | Kalkulation ist bereits abgeschlossen |
410 | D | Keine Kalkulationspositionen vorhanden |
411 | D | Texte zu Kalkulationspositionen sind nicht vollständig |
412 | D | Kostenrechnungskreis & ist nicht vorhanden |
413 | D | Eine Position auswählen |
414 | D | Blockende markieren |
415 | D | Langtext in Sprache & ist nicht vorhanden |
416 | D | Musterkalkulation &/& ist nicht vorhanden |
417 | D | Text zu Musterkalkulation &/& in Sprache & ist nicht vorhanden |
418 | D | Preistabelleneintrag & & ist nicht vorhanden |
419 | D | Text zu Preiselement & & ist nicht vorhanden |
420 | D | Verteilung bei Positionstyp & ist nicht möglich |
421 | D | Kalkulation wurde abgeschlossen von & |
422 | D | Losgröße wurde nicht geändert |
423 | D | Losgröße wurde erfolgreich geändert |
424 | D | Keine Positionen vorhanden |
425 | D | Es wurden keine Positionen ausgeschnitten |
426 | D | & Position(en) wurde(n) eingefügt |
427 | D | & Position(en) wurde(n) gelöscht |
428 | D | & Position(en) wurde(n) aus der Zwischenablage eingesetzt |
429 | D | & Position(en) wurde(n) in die Zwischenablage kopiert |
430 | D | & Position(en) wurde(n) in die Zwischenablage ausgeschnitten |
431 | D | Mengeneinheit eingeben |
432 | D | Position hat keine Mengeneinheit |
433 | D | Kalkulation wurde zwischengesichert |
434 | D | Position hat keine Kostenart |
435 | D | Kostenarten wurden erfolgreich ermittelt |
436 | D | Kostenarten konnten nicht vollständig ermittelt werden |
437 | D | Kostenarten waren schon für alle relevanten Positionen gepflegt |
438 | D | Kostenarten wurden nicht vollständig gepflegt |
439 | D | Pos. &: Kostenart manuell nicht pflegbar |
440 | D | Einheitliche Fremdwährung für die Positionen eingeben |
441 | D | Fremdwährung(Kopf) eingeben |
442 | D | Es wurden keine Positionen in die Zwischenablage übernommen |
443 | D | Kalkulation wurde gesichert |
444 | D | Die angeforderte Funktion & ist hier nicht vorgesehen |
445 | D | Die Musterkalkulation kann nicht gesichert werden: Mengeneinheit fehlt |
446 | D | Mengeneinheiten wurden nicht vollständig gepflegt |
447 | D | Bei Losgröße & werden alle Positionsmengen gelöscht |
448 | D | Kalkulationsmenge & ist unzulässig |
449 | D | Kursänderung nicht möglich da Fremdwährung gleich Hauswährung ist |
450 | D | Preis oder Preiseinheit von Positionen mit Schichtung nicht änderbar |
451 | D | Stückpreis der Kalkulation um & & zu groß |
452 | D | Erste Position erreicht |
453 | D | Letzte Position erreicht |
454 | D | Zuerst Positionstyp eingeben |
455 | D | Zu diesem Positionstyp sind auf dem Feld keine Eingabemöglichk. anzeigbar |
456 | D | Abschluß der Kalkulation wurde zurückgesetzt |
457 | D | Positionstyp & auf diesem Listbild nicht zulässig |
458 | D | Musterkalkulation &1/&2 ist zum Löschen vorgemerkt |
459 | D | Die Reduzierung der Preiseinheit kann zu Rundungsfehlern führen |
460 | D | Pos. &: Herkunftsgruppe manuell nicht pflegbar |
461 | D | Pos. &: Kostenelementenummer manuell nicht pflegbar |
462 | D | Pos. &: Kostenelementenummer wurde an Kostenart angepaßt |
463 | D | Kalkulation wird vorgemerkt |
464 | D | Pos. &: Menge manuell nicht pflegbar |
465 | D | Pos. &: Mengeneinheit manuell nicht pflegbar |
466 | D | Pos. &: Preis manuell nicht pflegbar |
467 | D | Pos. &: Ressource manuell nicht pflegbar |
468 | D | & Position(en) in Zwischenablage kopiert. Beachte Warnungen im Protokoll |
469 | D | Pos. &1: Fehler in der Zuordnung zwischen Kostenart und Kostenelement |
470 | D | Position &1 nicht änderbar. Kostenart &2 ist Gemeinkostenart. |
471 | D | Pos. &1: Preis manuell geändert. Position wurde nicht neu bewertet. |
472 | D | Pos. &1: Preis manuell geändert wurde zurückgesetzt. |
473 | D | Es sind Warnungen aufgetreten -> siehe Protokoll |
474 | D | Fixkosten unzulässig -> Eingabe gelöscht |
475 | D | Fixkosten unzulässig -> Eingabe gelöscht |
476 | D | Fixkosten unzulässig -> Eingabe gelöscht |
477 | D | Fixkosten unzulässig -> Eingabe gelöscht |
478 | D | Kostenart hier unzulässig -> Kostenelement gelöscht |
479 | D | In Zeile &1 wurde das technische Feld &2 gelöscht. |
480 | D | Kalkulationspositionen vom Typ I (Rohstoffkalk.) sind nicht änderbar. |
481 | D | Kostenart &1 in Musterkalkulation &2/&3 vorgegeben. |
482 | D | Kostenart &1 in Ressource vorgegeben. |
496 | D | Es existiert kein Preis in Planungswährung |
497 | D | Es existiert kein Preis in Transaktionswährung |
498 | D | Kurstyp & ist nicht vorhanden |
499 | D | Währung & ist nicht vorhanden |
500 | D | Währung & kann nicht in Währung & umgerechnet werden |
501 | D | Material & nicht vorhanden |
502 | D | Material & in Werk & nicht vorhanden |
503 | D | Werk & ist dem Buchungskreis & nicht zugeordnet |
504 | D | Werk & ist dem Kostenrechnungskreis & nicht zugeordnet |
505 | D | Werk angeben |
506 | D | Prozessmaterial & aus Werk & ist unzulässig |
507 | D | Keine kostentragenden Positionen vorhanden -> Grafik nicht anzeigbar |
508 | D | Angabe der Ressource für Positionstyp &1 nicht ausreichend. |
509 | D | Nicht alle Angaben aus dem ausgewählten Datensatz werden übernommen. |
550 | D | Summenwert zu hoch, bitte Eingaben korrigieren |
551 | D | Fehler bei Prozenterrechnung, Prozentsumme auf 0 gesetzt |
552 | D | Zielwerte übernommen |
553 | D | Zielwerte NICHT übernommen |
554 | D | Mengeneinheit wurde nicht geaendert |
555 | D | Mengeneinheit wurde geaendert |
556 | D | Wert konnte nicht aus Prozentzahl berechnet werden |
557 | D | Zielwert konnte nicht berechnet werden |
558 | D | Mengeneinheit NICHT geaendert, Grund: & |
559 | D | Summenwert nicht anzeigbar (zu hoch) |
560 | D | Doppeleingabe: Prozentwerteingabe wurde ignoriert |
561 | D | Formel fehlerhaft |
562 | D | Fehler bei Formelberechnung |
563 | D | Umrechnug von & in & nicht möglich. |
564 | D | Formeleingabe nicht möglich wegen internem Fehler |
565 | D | Berechneter Wert ist zu hoch, bitte korrigieren |
600 | D | Interner Fehler: & & & & |
601 | D | Interner Fehler: Aktivitätentyp & ist ungültig |
602 | D | Interner Fehler: Datenkonstellation (Aufruf) |
603 | D | Interner Fehler: Unerwarteter Returncode |
618 | D | Warnungen zur Formelberechnung aufgetreten -> Fehlerprotokoll |
619 | D | Formel verweist auf automatisch generierte Position(en) |
620 | D | Syntaxfehler in Formel: &1 |
621 | D | Formel zu komplex: &1 |
622 | D | Fehlerhafter Bezug in Formel: &1 |
623 | D | Fehlerhafter Bezug oder zyklische Referenz in Formel: &1 |
624 | D | Formel mit Positionstyp &1 ist unzulässig |
625 | D | Division durch 0 in Formel: &1 |
626 | D | Fehler in Formel: &1 |
627 | D | Unzulässige Verwendung von Konstanten in Formel: &1 |
628 | D | Summe mit Positionstyp &1 ist unzulässig |
630 | D | Kostenstelle &1 aus Arbeitsplatz übernommen. |
631 | D | Arbeitsplatz und Werk zum Arbeitsplatz eingeben. |
632 | D | Dem Arbeitsplatz &1 in Werk &2 ist keine Kostenstelle zugeordnet. |
633 | D | Arbeitsplatz-ID &1 in Zeile &2 nicht gefunden. |
639 | D | Prozeßkosten wurden gelöscht |
640 | D | Fehler während der Prozeßkostenermittlung -> Fehlerprotokoll |
641 | D | Es wurden keine Prozeßkosten ermittelt -> Fehlerprotokoll |
650 | D | Rohstoffkosten erfolgreich ermittelt |
651 | D | Rohstoffkosten wurden gelöscht |
652 | D | Es wurden keine Rohstoffkosten ermittelt |
653 | D | Fehler bei der Ermittlung der Rohstoffkosten -> Fehlerprotokoll |
654 | D | Rohstoffkosten wurden gelöscht |
661 | D | Es wurden keine Kalkulationspositionen neubewertet |
662 | D | Menge der Verkaufsbelegposition wurde geändert -> Kalk. wird angepaßt |
663 | D | Im Verkaufsbeleg wurde das Preisdatum geändert -> evtl. Kalk. anpassen |
664 | D | Fixpreis/Fixwert übersteigt Gesamtpreis/Gesamtwert |
665 | D | Pos. & : Positionsmenge & ist unzulässig |
666 | D | Pos. & : Wert ist um & & zu groß |
667 | D | Pos. & : Wert ist um & & zu klein |
668 | D | Pos. & :Zwis.Summe ist um & & zu groß |
669 | D | Pos. & :Zwis.Summe ist um & & zu klein |
670 | D | Ges.Summe ist um & & zu groß |
671 | D | Ges.Summe ist um & & zu klein |
672 | D | Pos. & : Menge ist zu groß |
673 | D | FW.Betrag ist um & & zu groß |
674 | D | Kalkulationskopffremdwährung wurde erfolgreich geändert |
675 | D | FW.Betrag ist um & & zu klein |
676 | D | Pos. & : Preis ist um & & zu groß |
677 | D | Pos. & : Preis ist um & & zu klein |
678 | D | Kalkulationskopffremdwährung wurde nicht geändert |
679 | D | Positionsfremdwährung wurde nicht geändert |
680 | D | Kostenart bei Kalkulationsvariante & ist unzulässig |
681 | D | Kostenart wurde gelöscht |
682 | D | Kalkulation wurde erfolgreich neubewertet |
683 | D | Positionsfremdwährung wurde erfolgreich geändert |
684 | D | Gemeinkostenzuschlag ist um & & zu groß |
685 | D | Gemeinkostenzuschläge wurden erfolgreich ermittelt |
686 | D | Gemeinkostenzuschläge wurden gelöscht |
687 | D | Es wurden keine Gemeinkostenzuschläge ermittelt |
688 | D | Gemeinkostenbezuschlagung ist nicht durchführbar |
689 | D | Pos. & : Kostenart & im KOKRS & am & ist nicht vorhanden |
690 | D | Kostenart eingeben |
691 | D | Vorlagemengeneinheit & ist nicht in Mengeneinheit & umrechenbar |
692 | D | Menge entspricht nicht den Anforderungen der Mengeneinheit |
693 | D | Pos. & : Positionskostenart entspricht nicht zu beplanender Kostenart |
694 | D | Pos. & : Kostenart & hat einen unzulässigen Kostenartentyp |
695 | D | Pos. & : Positionskennzeichen & ist unzulässig |
696 | D | Fremdwährung(en) wurde(n) erfolgreich geändert |
697 | D | Fremdwährung(en) wurde(n) nicht geändert --> Fehlerprotokoll |
698 | D | Kurs und Kursdatum/Kurstyp nicht gleichzeitig eingeben |
699 | D | Es wurde(n) keine Fremdwährung(en) eingetragen |
700 | D | Markieren Sie bearbeitungsrelevante Positionen |
701 | D | Es wurde keine Kalkulationsvariante ausgewählt |
702 | D | Überlauf aufgetreten --> Fehlerprotokoll |
703 | D | Losgröße wurde nicht geändert --> Fehlerprotokoll |
704 | D | Verlassen mit Zwischensichern zur Zeit nicht möglich --> Fehlerprotokoll |
705 | D | Kalkulationskopffremdwährung wurde nicht geändert --> Fehlerprotokoll |
706 | D | Positionsfremdwährung wurde nicht geändert --> Fehlerprotokoll |
707 | D | Kalkulation konnte nicht neu bewertet werden --> Fehlerprotokoll |
708 | D | Es wurden keine Positionen eingesetzt --> Fehlerprotokoll |
709 | D | Es wurden keine Gemeinkostenzuschläge ermittelt -> Fehlerprotokoll |
710 | D | Kalkulation konnte nicht referenziert werden --> Fehlerprotokoll |
711 | D | Kalkulation konnte nicht angepasst werden --> Fehlerprotokoll |
712 | D | Kalkulationsgesamtwert wurde verändert --> Fehlerprotokoll |
713 | D | Auflösung Musterkalkulation nicht durchgeführt --> Fehlerprotokoll |
714 | D | Kostenartenermittlung nicht vollständig möglich --> Fehlerprotokoll |
715 | D | Bei der Berechnung von Formeln traten Fehler auf --> Fehlerprotokoll |
716 | D | Funktion konnte nicht ausgeführt werden --> Fehlerprotokoll |
717 | D | Funktion wurde erfolgreich ausgeführt --> Protokoll |
718 | D | Es wurden Meldungen gesammelt. Sehen Sie in das Fehlerprotokoll |
719 | D | Kalkulation wurde erfolgreich neubewertet, Warnungen -> Fehlerprotokoll |
720 | D | ***** Meldungen Musterkalkulationsübersicht **************** |
721 | D | Es konnten keine Musterkalkulationen selektiert werden |
722 | D | Gültige Zeile auswählen |
723 | D | Musterkalkulation &1 (Kalkulationspositionen) nicht gefunden |
724 | D | Positionieren Sie den Cursor auf die gewünschte Musterkalkulation |
730 | D | *** Meldungen Musterkalkulationsauflösung / Materialauflösung ******** |
731 | D | Keine Kalkulation zu &1 &2 gefunden |
732 | D | Keine Kalkulationsposition zu &3 &1 gefunden |
733 | D | Der Preis der Musterkalkulation &1 hat sich mittlerweile geändert |
734 | D | Fehler beim Zugriff auf &1 &2 Auflösungsstufe: &3 |
735 | D | Zyklische Verwendung von Musterkalkulation &1 entdeckt |
736 | D | Keine Musterkalkulation für Auflösung selektiert |
737 | D | Keine Musterkalkulation für Auflösung vorhanden |
738 | D | Musterkalkulation &1: Gemeinkostenzuschläge wurden gelöscht |
739 | D | Zulässige Anzahl an Auflösungsstufen eingeben |
740 | D | Positionsmenge wurde gerundet |
741 | D | Auflösung Musterkalkulation wurde erfolgreich durchgeführt |
742 | D | Musterkalkulation &1 im Kostenrechnungskreis &2 ist nicht vorhanden |
743 | D | Kalkulationsvariante &1 ist nicht vorhanden |
744 | D | Musterkalkulation &1: Überlauf aufgetreten |
745 | D | Positionsmenge wurde von &1 &2 auf &3 &4 umgerechnet |
746 | D | Es wurden keine Gemeinkosten ermittelt |
747 | D | Werk &2 existiert nicht im Kostenrechnungskreis &1 |
748 | D | Mischkalkulation in Auflösungsstufe &1 für Material &2 Werk &3 |
749 | D | Mischkalkulation vorhanden: maximal &1 Auflösungsstufe(n) möglich |
750 | D | ***** Meldungen Verwendungsnachweis von Musterkalkulationen*** |
751 | D | Keine Verwendung von Musterkalkulation & & gefunden |
752 | D | Keine Selektion für Verwendungsnachweis getroffen |
753 | D | Kostenrechnungskreis wurde zwischenzeitlich geändert |
799 | D | *****Ende Fehlermeldungen Einzelkalkulation Funktionsbausteine******* |
800 | D | *****Anfang Fehlermeldungen Einzelkalkulationen für Excelanschluß**** |
801 | D | Mengeneinheit & ist in Sprache & nicht angelegt |
802 | D | Kostenart & hat einen unzulässigen Kostenartentyp |
803 | D | Kostenart & im KOKRS & am & ist nicht vorhanden |
804 | D | Pos. &: Für Positionstyp & unzulässige Eingaben wurden gelöscht |
805 | D | Auf diesem Feld sind keine Eingabemöglichkeiten anzeigbar |
806 | D | Pos. &: Kalkulationsvariante verlangt eine Kostenart |
807 | D | Pos. &: Kalkulationsvariante läßt eine Kostenart nicht zu |
808 | D | Das Material & ist keinem zulässigen Werk zugeordnet |
809 | D | Der Kostenstelle & Kreis & sind am & keine Leistungsarten zugeordnet |
810 | D | Geben Sie eine Einkäufergruppe ein |
811 | D | Geben Sie für eine BANF ohne Materialnummer eine Warengruppe an |
812 | D | Nicht löschbare Positionen (Typ J, G oder X) wurden wieder eingefügt. |
813 | D | Keine Informationen zur markierten Position vorhanden. |
895 | D | Die Daten sind unvollständig oder inkonsistent |
896 | D | Die Daten sind konsistent |
897 | D | Funktion ist nicht unterstützt. |
898 | D | & & & & |
899 | D | *****Ende Fehlermeldungen Einzelkalkulation 000 - 899 ********* |
000 | E | ********* Unit Costing Error Messages 000 - 999 *************** |
001 | E | Controlling area & does not exist |
002 | E | Base planning object & & already exists |
003 | E | Base planning object & & does not exist |
004 | E | No texts for cost estimate & & in language & |
005 | E | Base planning object &1 &2 does not exist |
006 | E | No texts for reference & & in language & |
007 | E | Base planning object &1 &2 does not exist |
009 | E | Base planning object & may already have been archived |
010 | E | Cost element & in CO area & does not exist for & |
011 | E | Company code & is not assigned to controlling area & |
012 | E | Plant & is not assigned to company code & |
013 | E | Cost estimate & & for object destroyed (saving not possible) |
014 | E | Data for base planning object & & was saved |
015 | E | Import of cost estimate failed (notify system administrator) |
016 | E | Cost estimate & & already exists (no saving allowed) |
017 | E | Base planning object & & was saved |
018 | E | Base planning object & is locked by user & |
019 | E | System error: Lock table overflow |
020 | E | Internal error: & is not a valid activity type |
021 | E | Transaction & cannot be processed in base object costing |
022 | E | Base planning object name contains invalid characters |
023 | E | Reference order & does not exist |
024 | E | Enter one reference object |
025 | E | Reference order & is not assigned to controlling area & |
026 | E | Reference project & does not exist |
027 | E | Reference project & is not assigned to controlling area & |
028 | E | No cost estimate exists for reference order & for & |
029 | E | No cost estimate exists for reference project & for & |
030 | E | No unit cost estimate exists for reference & |
031 | E | Plant & does not exist |
032 | E | Company code & does not exist |
033 | E | No total value cost estimate exists for reference order & |
034 | E | No total value cost estimate exists for reference project & |
035 | E | Cost element & has an invalid cost element category |
036 | E | No cost estimate exists for the reference material |
037 | E | Enter company code or plant |
038 | E | Internal error: Update not possible |
039 | E | Reference cost estimate not allowed |
040 | E | Cost object & to be copied does not exist |
041 | E | Cost object & to be copied is not assigned to CO area & |
042 | E | No cost estimate exists for cost object & to be copied |
043 | E | No cost estimate exists for material & to be copied |
044 | E | Enter valid costing date and/or version |
045 | E | No cost estimate exists for sales document &, item & |
046 | E | Sales document & item & does not exist |
047 | E | Costing sheet not available for base planning objects or ad hoc cost est |
048 | E | First enter the costing sheet |
049 | E | Enter costing sheet |
050 | E | Costing reference object & not allowed |
051 | E | No entry in table & |
052 | E | The source and target tables have different numbers of entries |
053 | E | The keys of the source and target tables are the same |
054 | E | Cost estimate with key: & does not exist |
055 | E | Internal program error: & |
056 | E | Overhead key & not available in costing sheet & |
057 | E | Cost estimate could not be selected |
058 | E | More than one cost estimate has the key & |
059 | E | Data relevant to costing was changed. Adjust cost estimate |
060 | E | No overhead key exists for costing sheet & |
061 | E | No authorization to create base planning obj. in controlling area & |
062 | E | No authorization to change base planning obj. in controlling area & |
063 | E | No authorization to display base planning obj. in controlling area & |
064 | E | No authorization for authorization object &, activity &, CO area & |
065 | E | Object &1 / &2 does not exist |
066 | E | Profit center &1 does not exist in controlling area &2 |
067 | E | Unit cost estimate &1 does not exist |
068 | E | Base planning object group &2 is not valid in controlling area &1 |
099 | E | *** Messages for Table Control ***************************************** |
100 | E | Width of selected columns changed |
101 | E | Column width setting canceled |
102 | E | Shifted columns cannot be fixed |
103 | E | Select column(s) |
104 | E | Characteristic & has already been assigned |
105 | E | Feature & does not exist |
107 | E | & is not a valid characteristic name |
120 | E | Internal error: no HTML template has been found for model & |
121 | E | Object & is not in the Web Repository |
122 | E | No HTML template has yet been saved for this costing model |
150 | E | ********* Error messages for multilevel unit costing ******************** |
151 | E | Multilevel unit costing is at the pilot stage |
152 | E | Index &1 for table &2 does not yet exist |
153 | E | Index is already available. |
154 | E | Index was sucessfully created. |
155 | E | An item cannot be deleted from an automatic cost estimate |
156 | E | The objects selected cannot be inserted inside each other |
157 | E | Multilevel unit costing requires a WIN32 frontend |
158 | E | A tree control could not be generated. |
159 | E | The Drag and Drop function could not be initialized. |
160 | E | Program inconsistency: Node &1 does not exist. |
161 | E | Error when communicating with a tree control. |
162 | E | No materials/material cost estimates found |
163 | E | Material cost estimate for material &1 is locked by user &2 |
164 | E | Inconsistent internal node type |
165 | E | Error messages have been issued. Please look in the log. |
166 | E | Cyclic structures cannot be costed |
167 | E | Base planning object & not found |
168 | E | Cost estimate already exists |
169 | E | Position the cursor on a valid line |
170 | E | Reference cost estimate has errors (see long text) -> no copy created |
171 | E | Material of reference cost estimate is configurable -> no copy created |
172 | E | Base planning object &1 contains base planning object &2 without item |
173 | E | Base planning object &1 does not have a costing item |
174 | E | Plant &1 is not in controlling area &2, no selection for this plant |
175 | E | No corresponding plant exists in controlling area &1 |
176 | E | No base planning object found for the selection criteria |
177 | E | No activity types in co. code &1 for the selection criteria entered |
178 | E | Mixed cost estimate not allowed as reference -> no copy |
179 | E | Cost est. for proc. alternatives not allowed as reference -> no copy |
180 | E | Cost ests for co-products not allowed as reference -> no copy |
181 | E | Reference cost estimate contains cycles and will not be copied |
182 | E | Costing variant &1 not allowed when creating cost estimate |
183 | E | Set a filter first in the unit costing list screen |
184 | E | Copying was canceled - data has not been changed |
185 | E | There is no suitable container in the worklist |
186 | E | Object was not inserted as it already exists in the structure |
198 | E | Container is item category-dependent - enter item category |
199 | E | Item category &1 is not permitted for container |
200 | E | Access to worklist &1 denied |
201 | E | Worklist &1 does not exist |
202 | E | Worklist(s) could not be saved |
203 | E | Worklists not read successfully |
204 | E | Contents of worklist &1 not read successfully -> default display |
205 | E | No worklist exists for which authorization is provided |
206 | E | Only &1 of the worklists specified can be deleted |
207 | E | Worklist was not deleted |
208 | E | Worklist(s) not found |
209 | E | Creation of worklist not authorized |
210 | E | Not all worklists were found |
211 | E | Action canceled |
212 | E | Worklist could not be created |
213 | E | Worklist is emtpy and so cannot be edited |
214 | E | Worklist was not renamed successfully |
215 | E | Lock error for new worklist &1 occurred &2 |
216 | E | Worklist &1 is currently locked for write access - saving not possible |
217 | E | Worklist was saved |
218 | E | Worklist created successfully |
219 | E | Worklist copied successfully |
220 | E | Worklist was renamed and saved under new name |
221 | E | Enter a valid name for the worklist |
222 | E | Content of worklist &1 was not read successfully |
223 | E | Temporary worklists and worklists with free text (still) not allowed |
224 | E | Worklist was deleted |
225 | E | Worklist name either not entered or not allowed -> worklist not created |
226 | E | Nothing deleted |
227 | E | Worklist is empty and so cannot be saved |
228 | E | Worklist is empty and so cannot be copied |
229 | E | Worklist is empty and so cannot be renamed |
230 | E | Worklist is empty and so cannot be deleted |
231 | E | User configuration for worklist was saved |
232 | E | Deletion not possible because container is not empty |
233 | E | Worklist already in display |
234 | E | Lock error has occurred for worklist &1 to be deleted |
235 | E | The new and old names of the worklist are identical |
236 | E | Worklist is empty and so cannot be converted |
237 | E | Nothing copied |
238 | E | Worklist &1 is locked by user &2 |
239 | E | System was unable to lock worklist &1 - saving not possible |
240 | E | Lock error occurred for worklist &1 - saving not possible |
241 | E | Worklist has since been changed and is therefore being read again |
242 | E | Place the cursor on a container in the worklist |
243 | E | Enter a valid container name |
244 | E | Container was deleted |
245 | E | Container was inserted |
246 | E | Enter a container name that does not already exist in the worklist |
247 | E | Worklist has since been deleted from the database (see long text) |
248 | E | Cost estimate for &1 was not saved -> cannot be saved in worklist |
249 | E | The sole container of a worklist cannot be deleted |
250 | E | **************** Error Messages for Unit Costing Conversion ************* |
251 | E | Enter either an order or a cost center |
252 | E | No unit costing doucments were found for conversion |
253 | E | No year-dependent data exists for CO area & & |
254 | E | Conversion of the unit costing documents unnecessary |
255 | E | No annual values for plan version & in this controlling area |
256 | E | Fiscal year variant & does not exist |
257 | E | & entered differs from controlling area & of order |
258 | E | Order & does not exist |
259 | E | Cost center & in year & does not exist |
260 | E | Controlling area & of order is used for further processing |
261 | E | Error when translating currency: Costing number & |
262 | E | Unit costing document & has been converted |
263 | E | Unit costing document &: Error when updating |
264 | E | Conversion of unit costing document & unnecessary |
265 | E | Unit costing document & (number from COKP file) does not exist |
300 | E | ***** Error Messages RK70K_RC ********* |
301 | E | Costing variant & is invalid |
302 | E | Internal error: Transaction type & invalid |
303 | E | Internal error: Input parameter combination invalid |
304 | E | Cost estimate & already exists |
305 | E | Cost estimate & does not exist |
306 | E | You have exceeded the maximum number of periods (16) |
307 | E | Costing variant & not in table TCK03 |
308 | E | Error in costing control table TCK01 |
309 | E | Error in costing control table TCK02 |
310 | E | Error in costing control table TCK03 |
311 | E | Error in costing control table TCK04 |
312 | E | Error in costing control table TCK05 |
313 | E | Error in costing control table TCK06 |
314 | E | Error in costing control table TCK12 |
315 | E | Error in costing control table TCK07 |
316 | E | Valuation variant in cost estimate does not match control table |
317 | E | Costing variant & does not exist for the reference object |
318 | E | Costing type & is not in table TCK01 |
319 | E | Planning currency does not exist |
320 | E | No cost estimate exists for base planning object & |
326 | E | Error when determining partner number |
328 | E | Additional conditions for object selection will be ignored |
329 | E | Only the first object value is included in each case |
330 | E | Decimal places (relevant for rounding) changed for unit of measure &1 |
331 | E | Process &1 relates to controlling area &2 |
332 | E | Cost center / activity type does not exist in controlling area &3 |
342 | E | Characteristic cannot be deleted |
343 | E | Characteristic to be deleted might still be used in cost ests -> check |
344 | E | Customer enhancement is not active |
345 | E | No function entries exist -> Check template customizing if required |
346 | E | Model used in cost estimate -> characteristic cannot be deleted |
347 | E | Incomplete resource - contact person responsible for planning form |
348 | E | Characteristic &1 could not be interpreted |
349 | E | You must enter a value for characteristic &1 |
350 | E | Model &1 is not available |
351 | E | Model &1 is being processed by user &2 |
352 | E | Characteristic &1 is multiple value and cannot be assigned to a model |
353 | E | Model &1 is either not available or inconsistent |
354 | E | Either enter reference cost estimate or costing model |
355 | E | First enter a costing model and then restart action |
356 | E | New model |
357 | E | First enter model description then restart action |
358 | E | First enter a costing model |
359 | E | Costing model & contains invalid characters |
360 | E | Easy Cost Planning environment - you cannot access template directly |
361 | E | Characteristic &1 has user-defined data cat: use in model not possible |
362 | E | Cost element &1 in controlling area &2 does not exist |
363 | E | Characteristic &1 allows interval value entry: use in model not possible |
364 | E | You cannot use characteristic &1 in a template |
365 | E | Inserted model & leads to cyclic use |
366 | E | Enter the name of a costing model to be used as reference |
367 | E | Model &1 has been deleted |
368 | E | Model &1 is still being used and cannot be deleted |
369 | E | Model &1 has been saved |
370 | E | Model used in costings -> cannot be deleted or overwritten |
371 | E | Derivation rules for model exist: model cannot be overwritten |
372 | E | The name of the costing model must not begin with a number |
373 | E | The status &2 for characteristic &1 is not available |
374 | E | Characteristic &1 has not been released |
375 | E | Characteristic &1 must not be used in costing models |
376 | E | Model &1 exists already |
377 | E | Either make or correct the necessary entry: &1 |
378 | E | The cost estimate has been transferred |
379 | E | Internal error: characteristic &1 is not assigned to class type 051 |
380 | E | There is an inconsistency between the costing model and class |
381 | E | Characteristic value &1 cannot be interpreted as a quantity |
382 | E | Template &1 does not exist |
383 | E | There is no external activity &1 in plant &2, purchasing organization &3 |
384 | E | There is no subcontracting &1 in plant &2, purchasing organization &3 |
385 | E | Choose a name for the target model other than that in the template |
386 | E | Costing model &3 is currently being used for a costing by user &4 |
387 | E | Ensure the derivation rules and entry screen are current |
388 | E | Costing model is not allowed for this template environment |
389 | E | Maintain the classification status for class type 051 |
390 | E | Model has been created |
391 | E | Model &1 relates to controlling area &2 |
392 | E | Internal error, there is no model valuation & |
393 | E | Cost estimate too large for Microsoft Excel |
394 | E | You need Microsoft Windows to cost using Microsoft Excel |
395 | E | Costing using Microsoft Excel is not allowed |
396 | E | Reference cost estimate was created using Microsoft Excel |
397 | E | Cost estimate was created using Microsoft Excel |
398 | E | The link to Microsoft Excel was unsuccessful |
399 | E | ***** Error messages SAPMK70D ********* |
400 | E | Enter a foreign currency (header) |
401 | E | Currency & cannot be translated into & |
402 | E | Item category & not allowed |
403 | E | The cursor is not within a valid area |
404 | E | Cost estimate closed by user & |
405 | E | System error: RK70K-AKTYP not in internal control table |
406 | E | Text for reference object not defined in table TKKEX |
407 | E | Unit of measure & cannot be converted into & |
408 | E | Text for costing header & & & does not exist |
409 | E | Cost estimate already closed |
410 | E | No costing items exist |
411 | E | Texts for costing items incomplete |
412 | E | Controlling area & does not exist |
413 | E | Select an item |
414 | E | Select end of block |
415 | E | No text exists in language & |
416 | E | Base planning object &/& does not exist |
417 | E | No text exists for base planning object &/& in language & |
418 | E | Entry & & not in price table |
419 | E | No text for price component & & |
420 | E | Distribution not possible for item category & |
421 | E | Cost estimate closed by & |
422 | E | Lot size was not changed |
423 | E | Lot size changed |
424 | E | No items exist |
425 | E | No items were cut |
426 | E | & item(s) inserted |
427 | E | & item(s) deleted |
428 | E | & item(s) pasted from the clipboard |
429 | E | & item(s) copied into the clipboard |
430 | E | & item(s) moved to the clipboard |
431 | E | Enter unit of measure |
432 | E | Base planning obj. has no unit of measure |
433 | E | Cost estimate saved temporarily |
434 | E | Costing item has no cost element |
435 | E | All cost elements were successfully determined |
436 | E | Not all cost elements could be determined |
437 | E | Cost elements were already maintained for all the relevant items |
438 | E | Cost elements were not fully maintained |
439 | E | Item &: Cost element cannot be maintained manually |
440 | E | Enter a consistent foreign currency for the items |
441 | E | Enter foreign currency (header) |
442 | E | No items were copied into the clipboard |
443 | E | Cost estimate was saved |
444 | E | You cannot use function & here |
445 | E | Base planning object cannot be saved - no unit of measure |
446 | E | Units of measure not fully maintained |
447 | E | All item quantities will be deleted for lot size & |
448 | E | Costing quantity & not allowed |
449 | E | Exch. rate cannot be changed: Foreign cur. same as local cur. |
450 | E | No manual changes to price or price unit of items with structure allowed |
451 | E | Unit price of cost estimate too large by & & |
452 | E | First item reached |
453 | E | Last item reached |
454 | E | Enter item category first |
455 | E | You cannot display possible entries for this item category |
456 | E | Closing for cost estimate was reset |
457 | E | Item category & not allowed on this list screen |
458 | E | Base planning object &1/&2 is flagged for deletion |
459 | E | Reducing the price unit may cause rounding errors |
460 | E | Item &: Origin group cannot be maintained manually |
461 | E | Item &: Cost comp no. cannot be maintained manually |
462 | E | Item &: Cost component no. was adapted to cost element |
463 | E | Cost estimate marked |
464 | E | Item &: Quantity cannot be maintained manually |
465 | E | Item &: Unit of measure cannot be maintained manually |
466 | E | Item &: Price cannot be maintained manually |
467 | E | Item &: Resource cannot be maintained manually |
468 | E | & item(s) copied into clipboard. Please note warnings in log |
469 | E | Item &1: Error in assignment between cost element and cost component |
470 | E | Item &1 cannot be changed. Cost element &2 is cost element for overhead. |
471 | E | Item &1: Manual price change, item was not revaluated |
472 | E | Item &1: Manual price change was reset |
473 | E | Warning messages have been issued - see log |
474 | E | Fixed costs invalid - entry deleted |
475 | E | Fixed costs invalid - entry deleted |
476 | E | Fixed costs invalid - entry deleted |
477 | E | Fixed costs invalid - entry deleted |
478 | E | Cost element not valid here - cost component deleted |
479 | E | In line &1, the technical field &2 was deleted |
480 | E | Costing items of type I (raw material costing) cannot be changed |
481 | E | Cost element &1 predefined in base planning object &2/&3 |
482 | E | Cost element &1 specified in resource |
496 | E | No price exists in the planning currency |
497 | E | No price exists in the transaction currency |
498 | E | Exchange rate type & does not exist |
499 | E | Currency & does not exist |
500 | E | Currency & cannot be converted into currency & |
501 | E | Material & does not exist |
502 | E | Material & does not exist in plant & |
503 | E | Plant & is not assigned to company code & |
504 | E | Plant & is not assigned to controlling area & |
505 | E | Specify plant |
506 | E | Process material & from plant & not allowed |
507 | E | No items carrying costs exist - graphic cannot be displayed |
508 | E | Entry of resource for item category &1 is not sufficient |
509 | E | Not all entries from the selected data record have been transferred |
550 | E | Total value too high - please correct your entries |
551 | E | Error in percentage calculation - total percentage set to 0 |
552 | E | Target values copied |
553 | E | Target values NOT copied |
554 | E | Unit of measure was not changed |
555 | E | Unit of measure was changed |
556 | E | Value could not be calculated from percentage |
557 | E | Target value could not be calculated |
558 | E | Unit of measure NOT changed due to & |
559 | E | Total value cannot be displayed (too high) |
560 | E | Double entry: percentage entry ignored |
561 | E | Formula contains errors |
562 | E | Error when calculating formula |
563 | E | Conversion from & to & not possible |
564 | E | Formula cannot be entered due to internal error |
565 | E | Calculated value is to high and needs to be corrected |
600 | E | Internal error: & & & & |
601 | E | Internal error: Transaction type & invalid |
602 | E | Internal error: data combination (call) |
603 | E | Internal error: unexpected return code |
618 | E | Warnings issued for formula calculation - see error log |
619 | E | Formula refers to automatically generated item(s) |
620 | E | Syntax error in formula &1 |
621 | E | Formula too complex: &1 |
622 | E | Incorrect reference in formula &1 |
623 | E | Incorrect reference or cyclical reference in formula &1 |
624 | E | Formula not permissible for item category &1 |
625 | E | Division by zero in formula &1 |
626 | E | Error in formula &1 |
627 | E | Invalid use of constant values in formula &1 |
628 | E | Total not allowed with item category &1 |
630 | E | Cost center &1 transferred from work center |
631 | E | Enter work center and plant of the work center |
632 | E | No cost center assigned to work center &1 in plant &2 |
633 | E | Work center ID &1 in line &2 not found |
639 | E | Process costs were deleted |
640 | E | Error when determining process costs -> Error log |
641 | E | Process costs not determined -> Error log |
650 | E | Raw materials costs determined successfully |
651 | E | Raw materials costs were deleted |
652 | E | No raw materials costs determined |
653 | E | Error when determining raw materials costs -> Error log |
654 | E | Raw materials costs were deleted |
661 | E | No costing items were revaluated |
662 | E | Lot size was changed in sales document. Cost estimate is adjusted |
663 | E | Pricing date was changed in sales document. Adjust cost estimate |
664 | E | Fixed price/value exceeds total price/value |
665 | E | Item & : Invalid item category & |
666 | E | Item & : Value too large by & & |
667 | E | Item & : Value too small by & & |
668 | E | Item & : Subtotal too large by & & |
669 | E | Item & : Subtotal too small by & & |
670 | E | Grand total too large by & & |
671 | E | Grand total too small by & & |
672 | E | Item & : Quantity too large |
673 | E | Foreign cur. amount too large by & & |
674 | E | Costing foreign currency was changed |
675 | E | Foreign currency amount too small by & & |
676 | E | Item & : Price too large by & & |
677 | E | Item & : Price too small by & & |
678 | E | Costing header foreign currency was not changed |
679 | E | Item foreign currency was not changed |
680 | E | Cost element not allowed for costing variant & |
681 | E | Cost element was deleted |
682 | E | Cost estimate was revalued |
683 | E | Item foreign currency was changed |
684 | E | Overhead rate too large by & & |
685 | E | Overhead successfully calculated |
686 | E | Overhead rates deleted |
687 | E | No overhead rates calculated |
688 | E | Overhead cannot be applied |
689 | E | Item & : Cost element & does not exist in CO area & for & |
690 | E | Enter cost element |
691 | E | Ref. unit of measure & cannot be converted into unit of measure & |
692 | E | Qty does not meet requirements of the unit of measure |
693 | E | Item &: Cost element does not match planned cost element |
694 | E | Item & : Cost element & has an invalid cost element category |
695 | E | Item & : Item indicator & not allowed |
696 | E | Foreign currency (or currencies) successfully changed |
697 | E | Foreign currency (or currencies) not changed. See error log |
698 | E | Do not enter both an exchange rate and an exchange rate date/type |
699 | E | No foreign currency or currencies entered |
700 | E | Select the items relevant to processing |
701 | E | No costing variant was selected |
702 | E | Overflow. See error log |
703 | E | Lot size was not changed. See error log |
704 | E | You cannot currently exit after only temporarily saving. See error log |
705 | E | Costing header foreign currency was not changed. See error log |
706 | E | Item foreign currency was not changed. See error log |
707 | E | Cost estimate could not be revalued. See error log |
708 | E | No items were added. See error log |
709 | E | No overhead was calculated - see error log |
710 | E | Cost estimate could not be referenced. See error log |
711 | E | Cost estimate could not be adjusted. See error log |
712 | E | Total value of cost estimate changed. See error log |
713 | E | Base object explosion could not be carried out. See error log |
714 | E | Not all cost elements could be determined. See error log |
715 | E | Error while processing formulas. See error log |
716 | E | Function could not be executed. See error log |
717 | E | Function successfully executed. See log |
718 | E | Messages have been issued. Please refer to the error log. |
719 | E | Cost estimate successfully revaluated: Warnings -> Error log |
720 | E | **** Messages for Base Planning Object Overview *** |
721 | E | No base planning objects could be selected |
722 | E | Select a valid line |
723 | E | No cost estimate found for base planning object &1 |
724 | E | Place the cursor on the required base planning object |
730 | E | ***** Messages for Base Object Explosion / Material Explosion ******* |
731 | E | No cost estimate found for &1 &2 |
732 | E | No costing item found for &3 &1 |
733 | E | The price of base planning object &1 has changed |
734 | E | Error when reading &1 &2 explosion level: &3 |
735 | E | Cyclic use found for base planning object &1 |
736 | E | No base planning objects selected for explosion |
737 | E | No base planning objects exist for explosion |
738 | E | Base planning object &1: Overhead deleted |
739 | E | Enter a valid number of explosion levels |
740 | E | Item quantity was rounded |
741 | E | Base object explosion successfully executed |
742 | E | Base planning object &1 in CO area &2 does not exist |
743 | E | Costing variant &1 does not exist |
744 | E | Base planning object &1: Overflow |
745 | E | Item qty converted from &1 &2 to &3 &4 |
746 | E | No overhead costs were calculated |
747 | E | There is no plant &2 in controlling area &1 |
748 | E | Mixed cost estimate in explosion level &1 for material &2 plant &3 |
749 | E | Mixed cost estimate exists: maximum of &1 explosion level(s) possible |
750 | E | ***** Messages for Where-Used List of Base Planning Objects ****** |
751 | E | No usage found for base planning object & & |
752 | E | No selection made for where-used list |
753 | E | Controlling area has been changed |
799 | E | ***** End of Unit Costing Error Messages - Fuction Module *********** |
800 | E | ********** Error Messages for Unit Costing EXCEL Link *************** |
801 | E | Unit of measure & has not been created in language & |
802 | E | Cost element & has an invalid cost element category |
803 | E | Cost element & in CO area & does not exist for & |
804 | E | Item &: Invalid entries for item category & deleted |
805 | E | No possible entries available for this field |
806 | E | Item &: costing variant requires a cost element |
807 | E | Item &: costing variant does not allow a cost element |
808 | E | Material & is not assigned to a valid plant |
809 | E | Cost center & controlling area & on & not assiged to activity types |
810 | E | Enter a purchasing group |
811 | E | Enter the material group for a purchase requisition without material no. |
812 | E | Non-deletable items (J, G or X categories) were inserted again |
813 | E | No information available for the selected item |
895 | E | The data is either incomplete or inconsistent |
896 | E | Data is consistent |
897 | E | This function is not yet supported |
898 | E | & & & & |
899 | E | ****** End of Unit Costing Error Messages 000 - 899 *********** |
999 | E | *****Last of error messages for unit costing 000 - 999 ******** |