This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class MPL (Adapter zur iPPE-Workbench) is a standard Message Class in SAP ERP and is part of the package AD_MPL.
Message Class | MPL |
Short Text | Adapter zur iPPE-Workbench |
Package | AD_MPL |
ID | Language | Text |
---|---|---|
000 | D | ** Customizing ** |
001 | D | Das Merkmal &1 hat falsche Eigenschaften |
002 | D | Das Merkmal &1 gehört nicht zur Klasse &2 |
003 | D | Kein Filter/Fokus entsprechend der Selektionkriterien gefunden |
004 | D | Wählen Sie einen Filter/Fokus |
005 | D | Selektionskriterien wurden geändert, Auswahl aus alten Ergebnissen |
006 | D | Parameter für den Funktionsbaustein &1 sind unvollständig |
010 | D | ** Allgemeine Prüfungen ** |
011 | D | Cancel-Part-Prüfung ist wg. fehl. Customizing-Einstellung nicht möglich |
012 | D | &1 &2 / Teil &3: Dokument &4 fehlt im Arbeitsumfang |
013 | D | &1 &2: Teil &3 gemäß der Variantenkonfiguration oder ECM nicht gültig |
014 | D | &1 &2: Teil &3 ist gemäß des Arbeitsumfanges nicht gültig |
015 | D | &1 &2 ist der Klasse &3 Klassenart &4 nicht zugeordnet |
016 | D | &1: Fehlender Wert für Kennzeichen &2 in Klasse &3 Klassenart &4 |
017 | D | &1 &2: CANCEL-Part-Merkmal fehlt in Klasse &3 Klassenart &4 |
018 | D | &1 &2: Teil &3 is kein CANCEL-Teil für &4 |
019 | D | &1 &2 enthalten keine Teilenummer |
020 | D | Teil &1 ist ein voll austauschbares Material |
021 | D | Prüfungen wurden aufgrund fehlendem Customizing nicht durchgeführt |
022 | D | Das aktuelle Teil &1 ist an diesem Einbauort nicht möglich |
023 | D | &1 &2: Das aktuelle Teil &3 ist nicht als Cancel-Teil für &4 vorgesehen |
024 | D | &1 &2: Sowohl das akt. Teil als auch das Cancel-Teil sind nicht angegeben |
025 | D | &1 &2 &3 &4 |
026 | D | Verschiedene Konfigurationen für Funktionskennzeichen &1 gefunden |
050 | D | ** Prüfungen auf Set-Beziehungen ** |
051 | D | Teil &1 steht in Beziehung zu &2 &3 mit unbekannter Abhängigkeit |
052 | D | Set &1 &2: Keine Infos über eingebaute Teile für &3 &4 vorhanden |
053 | D | Nicht zulässige Kombination von Teil &1 in &2 und Teil &3 in &4 |
070 | D | ** Nachrichten für iPPE-Testanwendung ** |
071 | D | BAdI-Implementierung MPL_TEST ist nicht aktiv |
072 | D | Nachrichten: Testanwendung für die Schnittstelle zur iPPE-Workbench |
080 | D | Die Klasse & wurde erfolgreich angelegt |
081 | D | Das Merkmal & wurde erfolgreich angelegt |
899 | D | Customizing for released characteristic status (table TCMS) missing |
000 | E | ** Customizing ** |
001 | E | The characteristic &1 has wrong properties |
002 | E | Characteristic &1 does not belong to the class &2 |
003 | E | No filter/focus matching the selection was found |
004 | E | Choose a filter/focus |
005 | E | Selection criteria were changed. Selection is from the old results. |
006 | E | Parameters for function module &1 are incomplete |
010 | E | ** General Checks ** |
011 | E | Cancel-part check not possible because of missing Customizing settings |
012 | E | &1 &2 / part &3: Document &4 is missing in work scope |
013 | E | &1 &2: Part &3 not valid according to variant configuration or ECM |
014 | E | &1 &2: Part &3 is not valid according to work scope |
015 | E | &1 &2 is not assigned to class &3 class type &4 |
016 | E | &1: Missing value for characteristic &2 in class &3 class type &4 |
017 | E | &1 &2: CANCEL-Part characteristic missing in class &3 class type &4 |
018 | E | &1 &2: Part &3 is not a CANCEL part for &4 |
019 | E | &1 &2 does not contain a part number |
020 | E | Part &1 is a fully interchangeable part |
021 | E | No checks are run because of missing Customizing settings |
022 | E | The current part &1 is not possible at this location |
023 | E | &1 &2: The current part &3 is not intended as a cancel part for &4 |
024 | E | &1 &2: Neither the current part nor the cancel part are not specified |
025 | E | &1 &2 &3 &4 |
026 | E | Various configurations found for function identifier &1 |
050 | E | ** Checks on Set relations ** |
051 | E | Part &1 is related to &2 &3 with unknown dependencies |
052 | E | Set &1 &2: No information is available for installed parts for &3 &4 |
053 | E | Combination of part &1 in &2 and &3 in &4 is not allowed |
070 | E | ** Messages for the iPPE test application ** |
071 | E | BADI implementation 'MPL_TEST' is not active |
072 | E | Messages: Test application for the interface to the iPPE workbench |
080 | E | Class & successfully created |
081 | E | Characteristic & successfully created |
899 | E | Customizing for released characteristic status (table TCMS) missing |