This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class PVJ (Nachrichten für PRICAT (vgl.VJ)) is a standard Message Class in SAP ERP and is part of the package VPRI.
Message Class | PVJ |
Short Text | Nachrichten für PRICAT (vgl.VJ) |
Package | VPRI |
ID | Language | Text |
---|---|---|
000 | D | Zum Nachrichtentyp & ist kein interessiertes Partnersystem & vorhanden |
001 | D | Der Nachrichtentyp & ist hier nicht erlaubt. |
002 | D | Es konnten keine IDOCs erzeugt werden zum Nachrichtentyp & |
003 | D | Serialisierung: Es wurde schon ein aktuelleres IDOC verarbeitet |
004 | D | Fehler bei der Verbuchung der Konditionen, Status: & |
005 | D | ISO Einheit & ist nicht eindeutig in SAP Einheit umsetzbar bei & |
006 | D | ISO Einheit & ist nicht in SAP Einheit umsetzbar bei & |
007 | D | ISO Land & ist nicht eindeutig in SAP Land umsetzbar bei & |
008 | D | ISO Land & ist nicht in SAP Land umsetzbar bei & |
009 | D | ISO Währung & ist nicht eindeutig in SAP Währung umsetzbar bei & |
010 | D | ISO Währung & ist nicht in SAP Währung umsetzbar bei & |
011 | D | ISO Betrag & ist nicht eindeutig in SAP Betrag umsetzbar bei & |
012 | D | ISO Betrag & ist nicht in SAP Betrag umsetzbar bei & |
013 | D | Die Bewertungsart & ist nicht vorgesehen |
014 | D | Der Vertriebsbeleg &1 &2 ist nicht vorhanden |
015 | D | Der Verkaufsbezirk & ist nicht vorgesehen |
016 | D | Der Branchenschlüssel & ist nicht vorgesehen |
017 | D | Die Charge & bei Material & und Werk & ist nicht vorgesehen |
018 | D | Die Provisionsgruppe & ist nicht vorgesehen |
019 | D | Die Faktura Belegart & ist nicht vorgesehen |
020 | D | Fehler innerhalb der Verarbeitung des Kundensegmentes |
021 | D | Fehler bei der Verbuchung der Daten des Kundensegmentes, Status: & |
022 | D | Bis-Datum nicht berücksichtigt, da kleiner als das Gültig-am Datum |
023 | D | Bei leerem Gültig-am Datum wird das Bis-Datum nicht berücksichtigt |
024 | D | Rückstellungsbetrag bei Konditionsart & nicht erlaubt |
025 | D | Die Kalkulationswirksamkeit bei der Konditionsart & ist nicht änderbar |
026 | D | Es sind schon Bonuskonditionen vorhanden, Überschreiben ist nicht erlaubt |
027 | D | Das IDoc wurde erfolgreich verbucht |
028 | D | Keine Daten zum Versenden gefunden |
029 | D | Die Materialermittlung erfolgt zum Stichtag & |
030 | D | Das Bis-Datum darf nicht kleiner als das Von-Datum sein |
031 | D | Es gibt keine Vertriebsdaten zum Kunden: VkOrg, VtWeg, Sparte &1 &2 &3 |
032 | D | Das Preisfindungskennzeichen wurde aus dem Profil &1 übernommen |
033 | D | Bitte Sortiment oder Empfänger angeben |
034 | D | Sortiment zum Stichtag nicht gültig oder ohne zugeordnete Bausteine |
035 | D | Zu dem Sortiment &1 konnten keine zugeordneten Kunden ermittelt werden |
036 | D | Kein gültiges Sortiment vorhanden zu Kunde &1 und VkOrg &2 &3 &4 |
037 | D | Das Idoc für die ausgewählten Materialien wurde nicht erstellt |
038 | D | Idocs für die ausgewählten Materialien wurden erstellt |
039 | D | Sie haben keine Berechtigung für die angeforderte Aktivität |
040 | D | Die Kombination aus Partnerart &1 und Partner &2 ist nicht gepflegt |
041 | D | Nachrichtentyp &1 Partnerart &2 und Partner &3: keine Ausgangsparameter |
042 | D | Eine oder mehrere Partnervereinbarungen sind nicht zu finden |
043 | D | IDoc wurde nicht erstellt, da kein logisches system ermittelt wurde |
044 | D | Der Positionstyp &1 ist nicht vorhanden |
045 | D | Die ILN des Senders oder die Lieferantennummer müssen eingegeben werden |
046 | D | Die Katalognummer muß eingegeben werden |
047 | D | Fehler beim Lesen der geplanten Änderungen |
100 | D | *** Nachrichten Für K o n d i t i o n d o w n l o a d p r o f i l * |
101 | D | Dieses Konditionsdownloadprofil existiert bereits |
102 | D | Eingegebenes Konditionsdownloadprofil existiert nicht. |
103 | D | Die Felder konnten nicht ermittelt werden. |
104 | D | Die Konditionsliste existiert nicht. |
105 | D | Das eingegebene Konditionsdownloadprofil ist zur Zeit in Bearbeitung. |
106 | D | Selektionsbild für Download konnte nicht ermittelt werden |
107 | D | Zweck dieses Konditionsdownloadprofils ist nicht angegeben. |
108 | D | Keine Kalkulationsschema ist selektiert worden. |
109 | D | Keine Sprache ist selektiert worden. |
110 | D | Das IDOC konnte nicht angelegt werden. |
111 | D | Sie haben keine Berechtigung für die angeforderte Aktivität |
200 | D | Nachrichten für **** P R I C A T - E i n g a n g ********************* |
201 | D | ILN Ermittlung: Kein Adreß Segment E1ADRM1 mit Kennung FR vorhanden |
202 | D | ILN Ermittlung: Kein Adreß Zusatzsegment E1ADRE1 mit Kennung 100 |
203 | D | ILN Ermittlung: Die ILN &1 ist nicht in der Tabelle PRICAT_001 vorhanden |
204 | D | ILN Ermittlung: Zur ILN &1 ist kein Lieferant ermittelbar |
205 | D | Einkäufergruppenermittlung: keine Einkäufergruppe zu ILN &1 eingetragen |
206 | D | ILN Ermittlung: Die ILN &1 ist mehreren Lieferanten zugeordnet |
207 | D | ILN Ermittlung: Fehler bei Zuordnung ILN &1 zu Lieferant und EK-Gruppe |
208 | D | Einkauforganisation: nicht eindeutig ermittelbar zu ILN-Lief &1 / &2 |
209 | D | Einkauforganisation: nicht ermittelbar zu ILN-Lief &1 / &2 |
210 | D | Einkauforganisation &1: nicht zugeordnet zu ILN-Lief &2 / &3 |
211 | D | Empfänger ILN nicht aus E1ADRM1 Segment mit Kenneung MR bestimmbar |
212 | D | Fehler bei der IDoc Erzeugung &1 &2 &3 &4 |
213 | D | Idoc &1 wurde erfolgreich für das logische System &2 erzeugt |
214 | D | Fehler bei der Datenzuweisung |
249 | D | ********* Nachrichten Pricat Eingangsverarbeitung |
250 | D | Katalog &1 ist vollständig bearbeitet. |
300 | D | Fehler beim Einfügen in Preiskatalog &1 (Tabelle &2) |
301 | D | Fehler beim Ändern des Preiskatalogs &1 (Tabelle &2) |
302 | D | Preiskatalog &1 wurde aktualisert |
303 | D | Preiskatalog &1 wurde angelegt |
304 | D | Preiskatalog &1 ist abgeschlossen, keine Bearbeitung möglich |
305 | D | Im Katalog &1 konnte die BE zur ME &2 nicht ermittelt werden |
306 | D | Im Katalog &1 existiert die Basiseinheit zur Mengeneinheit &2 nicht |
307 | D | Preiskatalog &1 ist nicht vorhanden |
308 | D | Die Nummer des Preiskatalogs muß angegeben werden |
309 | D | Preiskatalog &1 enthält keine Produktgruppen- oder Materialzeilen |
310 | D | Die Daten des Preiskatalogs &1 wurden erfolgreich ermittelt |
311 | D | Preiskatalog &1 ist vorhanden |
312 | D | Fehler beim Löschen im Preiskatalog &1 (Tabelle &2). |
313 | D | Pflichtfeld &1 der Struktur &2 (&3, &4) ist nicht gefüllt |
314 | D | Katalog &1 wurde nicht verbucht. Fehler im Anwendungslog &2 |
315 | D | Zur EAN &1 (&2) fehlt die Basismengeneinheit |
316 | D | Zu der Struktur &2 (&1, &3, &4) fehlt der übergeordnete Eintrag |
317 | D | Artikel &1 besitzt nur die generierte EAN &2. |
318 | D | Mengeneinheit &3 zum Artikel &1 besitzt nur die generierte EAN &2 |
319 | D | Komponente &3 der Stückliste &2 ist nicht im Baustein &1 |
320 | D | Preiskatalog &1 wurde erstellt, Hinweise im Anwendungslog |
321 | D | Beim Auflösen der Stückliste &2 ist ein Fehler aufgetreten |
322 | D | Der Katalog mit der ILN &1 und der Bezeichnung &2 existiert bereits |
323 | D | Preiskatalog &1 wurde gelöscht |
324 | D | Preiskatalog &1 hat sich geändert. Hinweise im Anwendunglog &2 |
325 | D | Preiskatalog &1 hat sich nicht geändert. |
326 | D | Preiskatalog &1 hat sich geändert. |
327 | D | Komponente &3 der Stückliste &2 besitzt keine EAN |
328 | D | Komponente &3 der Stückliste &2 ist nicht der Katalogposition zugeordnet |
329 | D | Pflichtfeld &1 der EAN &3 gültig ab &4 ist nicht gefüllt |
330 | D | EAN &1 der Produktgruppe &2 erhält das Löschkennzeichen |
331 | D | EAN &1 wurde der Produktgruppe &2 des Preiskataloges zugeordnet |
332 | D | Kunde &1 ist dem Katalog nicht mehr zugeordnet |
333 | D | Kunde &1 wurde dem Katalog zugeordnet |
334 | D | Kunde &1 ist nicht dem Preiskatalog &2 zugeordnet |
335 | D | Daten der EAN &1 in der Produktgruppe &2 haben sich geändert. |
336 | D | Kunde &1 ist nicht zu übertragen oder fehlerhaft |
337 | D | Katalog &1 ist an keinen Kunden zu übertragen. |
338 | D | Daten des Kunden &1 haben sich geändert |
339 | D | Kunde &1 wurde dem Katalog erneut zugeordnet. |
340 | D | Material &1 besitzt keine EAN. |
341 | D | Mengeneinheit &2 des Materials &1 besitzt keine EAN |
342 | D | Bezeichnung der Produktgruppe &1 hat sich geändert |
343 | D | Produktgruppe &1 wurde dem Katalog hinzugefügt |
350 | D | Zu den angegebenen Daten existiert kein Katalog. |
351 | D | Keine Zeilen markiert. |
352 | D | Ohne Angabe der Einkäufergruppe ist nur Anzeigen möglich! |
353 | D | Das Material &1 wurde verbucht. Warnungen im Anwendungslog. |
354 | D | Das Material &1 konnte nicht verbucht werden. Fehler im Anwendungslog. |
355 | D | Ohne Angabe der Einkäufergruppe ist keine Pflege möglich. |
356 | D | Die Basismengeneinheit muß bei Neuanlage immer gepflegt werden |
357 | D | Fehler beim Speichern der Bearbeitungstatus der Mengeneinheiten |
358 | D | Die Mengeneinheit &1 ist für das Material nicht gepflegt. |
359 | D | Die Kataloginformationen konnten nicht gespeichert werden. |
360 | D | Die Katalogkopfdaten wurden gesichert. |
361 | D | Für Kataloge mit Testkennzeichen ist keine Artikelpflege möglich. |
362 | D | Das Material &1 wurde gelesen. |
363 | D | Die Status der Mengeneinheiten wurden gesichert. |
364 | D | Die Katalogzeilen wurden gesichert. |
365 | D | Die Katalogzeilen konnten nicht gespeichert werden. |
366 | D | Die Materialart & ist nicht vorhanden |
367 | D | Die ext.Materialnr darf bei dieser Materialart nicht nur Zahlen enthalten |
368 | D | Für Materialart & keine externe Nummernvergabe möglich |
369 | D | Die Nummer & ist zur Materialart & nicht vorgesehen |
370 | D | Die Katalogzeile konnten nicht gespeichert werden |
371 | D | Der Cursor steht nicht auf einer Tabellenzeile |
372 | D | Es können nur neu hinzugefügte Zeilen gelöscht werden |
373 | D | Für Materialart & keine interne Nummernvergabe möglich |
374 | D | Das Pflichtfeld &1 ist nicht gefüllt |
375 | D | Das Material &1 ist schon vorhanden |
376 | D | Bitte geben Sie ein Material ein |
377 | D | Das Logische System &1 existiert nicht |
378 | D | Der Katalog &1 ist gesperrt |
379 | D | Für geschlossene Kataloge ist keine Artikelpflege möglich. |
380 | D | Die EAN &1 ist gesperrt |
381 | D | Sie haben keine Berechtigung zur Pricatpflege für die Einkäufergruppe &1. |
382 | D | Das Übernahmeprofil konnte nicht gespeichert werden |
383 | D | Die Komponente ist kein Einzelartikel. |
384 | D | Der Katalog mit der Bezeichnung &1 existiert bereits |
385 | D | Übernahmeprofil zum Lieferanten &1 und Benutzer &2 nicht vorhanden |
386 | D | Es kann nur eine Warengruppe oder ein Material angegeben werden |
387 | D | Die Eigenschaften der Katalogfelder wurden gesichert. |
388 | D | Beim Speichern ist ein Fehler aufgetreten |
389 | D | Eingegebener Datensatz ist schon vorhanden und kann nur geändert werden |
390 | D | Fehler beim Aufruf einer Methode des Tree Controls |
391 | D | Funktionscode &1 wird nicht unterstützt |
392 | D | Katalogzeile konnte nicht gespeichert werden |
393 | D | Katalogzeile wurde gepeichert. |
394 | D | Basismengeneinheit darf nicht gelöscht werden |
395 | D | Bitte noch die Parameter zur Preisermittlung pflegen |
396 | D | Bei der Verbuchung der Daten ist ein Fehler aufgetreten |
397 | D | Die Position enthält keine Fehler |
398 | D | Katalogposition hat sich nicht geändert |
399 | D | Datensatz ist schon vorhanden |
400 | D | Die Daten des Produktes &3 (&1, &2, &4) wurden erfolgreich ermittelt |
401 | D | Die Daten des Produktes &3 (&1, &2, &4) können nicht ermittelt werden |
402 | D | Die Basismengeneinheit zum Material &1 konnte nicht gelesen werden |
403 | D | Die zum Material &1 ermittelte EAN &2 ist im Katalog schon vorhanden. |
404 | D | Profil &1 nicht vorhanden |
405 | D | Allgemeine Feldeigenschaften können nur im Customzing gepflegt werden. |
406 | D | Postion existiert bereits: Das Datum kann nicht geändert werden |
407 | D | Für das IDoc PriceCatalogue ist nur die Partnerart 'LS' erlaubt |
408 | D | Kein Katalog zu bearbeiten |
409 | D | Profil &1 nicht vorhanden, Keine Preisermittlung möglich! |
410 | D | Beim Download ist ein Fehler aufgetreten |
411 | D | Bei der Verbindung zu Ihrem Service ist ein Fehler aufgetreten |
412 | D | Fehler bei der Zuweisung des Katalogfeldes &1 &2 |
413 | D | Wertänderung im Katalogfeld &1 &2 von &3 auf &4 |
414 | D | Mengeneinheit &1 existiert bereits zum Datum &2 |
415 | D | Zur Internetfreigabe des Kataloges muß ein Musterkunde eingegeben werden |
416 | D | Der Internet-Musterkunde &1 wird nicht übertragen. |
417 | D | Verbuchungsfehler beim Sichern des Preiskataloges &1. |
418 | D | Änderungsdienst wurde im Hintergrund gestartet |
419 | D | Katalogerstellung wurde im Hintergrund gestartet |
420 | D | Start Änderungsdienst |
421 | D | Der Internet-Musterkunde &1 besitzt keine WEB-Freigabe. |
422 | D | Wegen mangelnder Resourcen ist keine Ausführung im Hintergrund möglich |
423 | D | Wertänderung im Katalogfeld &1 von &3 auf &4 |
424 | D | Sie haben keine Berechtigung zum Löschen des Preiskataloges &1 |
425 | D | Sie haben keine Berechtigung zur Erstellung von Preiskatalogen |
426 | D | Sie haben keine Berechtigung für den Änderungsdienst des Preiskatalogs &1 |
427 | D | Sie haben keine Berechtigung zum Versenden des Preiskataloges &1 |
428 | D | Sie haben keine Berechtigung zum Ändern des Preiskataloges &1 |
429 | D | Sie haben keine Berechtigung zum Ansehen des Preiskataloges &1 |
430 | D | Test BADI: Das Feld Nettogewicht ist nicht versorgt |
431 | D | Keine Einträge gefunden |
432 | D | Bitte Cursor auf eine gültige Zeile positionieren |
433 | D | Versorgungskz. nicht gesichert, Änderungsdienst überschreibt Felder. |
434 | D | Geänderte Felder werden von Änderungsdienst überschrieben. |
435 | D | Kunde &2 ist nicht dem Sortiment &1 zugeordnet |
436 | D | &1 |
437 | D | Das Katalogfeld &1 der Struktur &2 wurde verändert |
450 | D | Fehler beim Speichern der SBC-Parameter zum Debitor &1. |
451 | D | Fehler beim Speichern der SBC-Parameter zum Debitor &1. |
452 | D | Fehler beim Löschen der SBC-Parameter zum Debitor &1. |
453 | D | SBC-Parameter zum Debitor &1 sind gesperrt |
454 | D | Keine SBC-Parameter zum Debitor &1 vorhanden |
455 | D | SBC-Parameter zum Debitor &1 schon vorhanden |
456 | D | Sie haben keine Berechtigung SBC-Parameter anzulegen |
457 | D | Sie haben keine Berechtigung SBC-Parameter zu ändern |
458 | D | Sie haben keine Berechtigung SBC-Parameter anzuzeigen |
459 | D | Sie haben keine Berechtigung SBC-Parameter zu löschen |
460 | D | Preiskatalog &1 ohne Meldungen bearbeitet. |
461 | D | Preiskatalog &1 bearbeitet. Meldungen im Anwendungslog &2. |
463 | D | Zur EAN &2 konnte kein Vorlagematerial ermittelt werden |
465 | D | Bei Partnerart LS muß eine Partnernummer angegeben werden |
466 | D | Ein Wert für die Staffelbasis kann nur bei Wertstaffeln angegeben werden |
467 | D | Für das IDoc PriceCatalogue ist bei Partnerart 'LS' keine P.Rolle möglich |
480 | D | Bitte entfernen Sie zunächst die Zuordnung der Katalogart zu Strukturen. |
481 | D | Bitte verwenden Sie nur Strukturtypen zwischen '01' und '09'. |
482 | D | Die Struktur & ist nicht aktiv. |
483 | D | Die Struktur & ist nicht mehr aktiv. |
000 | E | No relevant partner system &2 exists for message type &1 |
001 | E | Message type & is not allowed here |
002 | E | No IDocs could be created for message type & |
003 | E | Serialization: A more recent IDoc has already been processed |
004 | E | Error during posting of conditions, status: & |
005 | E | ISO unit & cannot be converted unambiguously to an SAP unit for & |
006 | E | ISO unit & cannot be converted to an SAP unit for & |
007 | E | ISO country & cannot be converted unambiguously to SAP country & |
008 | E | ISO country & is cannot be converted to SAP country for & |
009 | E | ISO currency & cannot be converted unambiguously to SAP currency for & |
010 | E | ISO currency & cannot be converted to SAP currency for & |
011 | E | ISO amount & cannot be converted unambiguously to an SAP amount for & |
012 | E | ISO amount & cannot be converted to SAP amount for & |
013 | E | Valuation type & not available |
014 | E | Sales document &1 &2 not available |
015 | E | Sales district & not available |
016 | E | Industry key & not available |
017 | E | Batch & for material & and plant & not available |
018 | E | Commission group & not available |
019 | E | Billing document type & not available |
020 | E | Error during processing of a customer segment |
021 | E | Error when posting the data of a customer segment, status: & |
022 | E | Valid-to date not taken into account - smaller than valid-from date |
023 | E | When valid-from date is empty, valid-to date is not taken into account |
024 | E | Provision amount for condition type & not allowed |
025 | E | Results of pricing with condition type & can not be changed |
026 | E | Rebate conditions already exist, overwriting is not permitted |
027 | E | The IDoc was posted successfully |
028 | E | No data determined for transfer |
029 | E | Material determination carried out for key date & |
030 | E | The to-date cannot be smaller than the from-date |
031 | E | There is no SD data for the customer: Sls org., Dist.chl, div. &1 &2 &3 |
032 | E | The pricing indicator was adopted from profile &1 |
033 | E | Enter assortment or receiver |
034 | E | The assortment is not valid for the key date or has no module assigned |
035 | E | No assigned customers determined for assortment &1 |
036 | E | No valid assortment available for customer &1 and sls org. &2 &3 &4 |
037 | E | IDoc for the selected materials not created |
038 | E | IDocs created for the selected materials |
039 | E | You have no authorization for the activity requested |
040 | E | Combination of partner type &1 and partner &2 is not maintained |
041 | E | Message type &1 partner type &2 and partner &3: Not an issue parameter |
042 | E | The system cannot find one or more partner agreements |
043 | E | IDoc not created - no logical system determined |
044 | E | Item category &1 is not available |
045 | E | The sender's ILN or vendor number must be entered |
046 | E | The catalog number must be entered |
047 | E | Error while reading the planned changes |
100 | E | *** Output for C O N D I T I O N D O W N L O A D P R O F I L E * |
101 | E | This condition download profile already exists |
102 | E | Condition download profile entered does not exist |
103 | E | The fields could not be determined |
104 | E | The conditions list does not exist |
105 | E | The condition download profile entered is currently being processed. |
106 | E | Selection screen for download could not be determined |
107 | E | The purpose of this condition download profile is not specified |
108 | E | No pricing procedure selected |
109 | E | No language selected |
110 | E | The IDoc could not be created |
111 | E | You have no authorization for the activity requested |
200 | E | Messages for **** PRICAT - Inbound ************************ |
201 | E | ILN determination: No address segment E1ADRM1 with FR ident. available |
202 | E | ILN determination: No additional address segment E1ADRE1 with ident. 100 |
203 | E | ILN determination: ILN &1 is not available in the table PRICAT_001 |
204 | E | ILN determination: No vendor can be determined for ILN &1 |
205 | E | Purchasing group determination: no purchsaing group entered for ILN &1 |
206 | E | ILN determination: The ILN &1 is assigned to several vendors |
207 | E | ILN determination: Error during ILN assignment &1 to vendor and purch. gr |
208 | E | Purchasing organization: can not be clearly determined for ILN vend &1/&2 |
209 | E | Purchasing organization: can not be determined for ILN vendor &1/&2 |
210 | E | Purchasing organization &1: not assigned to ILN vendor &2 / &3 |
211 | E | ILN recipient can not be determined from E1ADRM1 segment with MR ident. |
212 | E | Error during IDoc creation &1 &2 &3 &4 |
213 | E | IDoc &1 has been successfully created for the logical system &2 |
214 | E | Error during data assignment |
249 | E | ********* PRICAT messages inbound processing |
250 | E | Catalog &1 is processed in full |
300 | E | Error during entry in price catalog &1 (Table &2) |
301 | E | Error during change to price catalog &1 (Table &2) |
302 | E | Price catalog &1 was updated |
303 | E | Price catalog &1 was created |
304 | E | Price catalog &1 is closed - processing not possible |
305 | E | The base unit for unit of meas. &2 could not be determined in catalog &1 |
306 | E | The base unit for the unit of measure &2 does not exist in catalog &1 |
307 | E | Price catalog &1 does not exist |
308 | E | The number of the price catalog must be entered |
309 | E | Price catalog &1 does not contain any product group or material lines |
310 | E | The price catalog data &1 has been successfully determined |
311 | E | Price catalog &1 exists |
312 | E | Error when deleting in price catalog &1 (table &2). |
313 | E | Mandatory field &1 of structure &2 (&3, &4) does not contain data |
314 | E | Catalog &1 was not posted. Error in application log &2 |
315 | E | The base unit of measure for EAN &1 (&2) is missing |
316 | E | The higher-level entry for the structure &2 (&1, &3, &4) is missing |
317 | E | Material &1 only contains the generated EAN/UPC &2 |
318 | E | Unit of measure &3 for material &1 only has generated EAN/UPC &2 |
319 | E | Component &3 of BOM &2 is not contained in module &1 |
320 | E | Price catalog &1 was created. See information in application log |
321 | E | An error occurred when BOM &2 was exploded |
322 | E | A catalog with ILN &1 and name &2 already exists |
323 | E | Price catalog &1 was deleted |
324 | E | Price catlaog &1 has changed. See information in application log &2 |
325 | E | Price catalog &1 has not changed |
326 | E | Price catalog &1 has changed |
327 | E | Component &3 of BOM &2 does not have an EAN/UPC |
328 | E | Component &3 of BOM &2 is not assigned to the catalog item |
329 | E | Required field &1 of EAN/UPC &3 valid from &4 is not filled |
330 | E | EAN/UPC &1 of product group &2 is flagged for deletion |
331 | E | EAN/UPC &1 was assigned to product group &2 of the price catalog |
332 | E | Customer &1 is no longer assigned to the catalog |
333 | E | Customer &1 was assigned to the catalog |
334 | E | Customer &1 is not assigned to price catalog &2 |
335 | E | Data of EAN/UPC &1 in product group &2 has changed |
336 | E | Customer &1 does not have to be transferred, or contains errors |
337 | E | Catalog &1 does not have to be transferred to any customer |
338 | E | Data of customer &1 has changed |
339 | E | Customer &1 was reassigned to the catalog |
340 | E | Material &1 does not have an EAN/UPC |
341 | E | Unit of measure &2 of material &1 does not have an EAN/UPC |
342 | E | Name of product group &1 has changed |
343 | E | Product group &1 was added to the catalog |
350 | E | There is no catalog for the data entered. |
351 | E | No lines selected |
352 | E | If you do not enter the purchasing group, you can only display the data |
353 | E | The material &1 has not been posted. Warnings in error log. |
354 | E | Material &1 could not be posted. Error in application log. |
355 | E | If you do not enter the purchasing group, you cannot maintain the data |
356 | E | The base unit of measure must be maintained during inital creation |
357 | E | Error when saving the processing status of the units of measure |
358 | E | The unit of measure &1 is not maintained for the material |
359 | E | The catalog information could not be saved |
360 | E | The catalog header data has been saved |
361 | E | No material maintenance is possible for catalogs with test indicators |
362 | E | The material &1 has been read |
363 | E | The status of the units of measure has been saved |
364 | E | The catalog lines have been saved |
365 | E | The catalog lines have not been saved |
366 | E | The material type & does not exist |
367 | E | With this material type, ext. material no. must not contain only numbers |
368 | E | No external number assignment possible for mat. type & |
369 | E | Number & not defined for material type & |
370 | E | The catalog line could not be saved |
371 | E | The cursor is not on the table line |
372 | E | Only newly added lines can be deleted |
373 | E | Internal number assignment is not possible for the material type & |
374 | E | The mandatory field &1 does not contain any data |
375 | E | Material &1 is already available |
376 | E | Enter a material |
377 | E | The logic system &1 does not exist |
378 | E | The catalog &1 is blocked |
379 | E | No material maintenance is possible for closed catalogs |
380 | E | The EAN &1 is blocked |
381 | E | You do not have authorization for PRICAT mainten. for purchasing group &1 |
382 | E | The transfer profile could not be saved |
383 | E | The component is not a single article |
384 | E | The catalog with description &1 already exists |
385 | E | Transfer profile for vendor &1 and user &2 does not exist |
386 | E | You can only enter a material group or material |
387 | E | The properties of the catalog fields were saved |
388 | E | Error occurred during save |
389 | E | Entered data record already exists and can only be changed |
390 | E | Error calling a method of the tree control |
391 | E | Function code &1 is not supported |
392 | E | Catalog line could not be saved |
393 | E | Catalog line was saved |
394 | E | Base unit of measure cannot be deleted |
395 | E | Maintain the parameters for price determination |
396 | E | An error occurred during posting of the data |
397 | E | The item does not contain any errors |
398 | E | The catalog item has not changed |
399 | E | Data record already exists |
400 | E | The data of product &3 (&1, &2, &4) was determined successfully |
401 | E | The data of product &3 (&1, &2, &4) cannot be determined |
402 | E | The base unit of measure for material &1 cannot be read |
403 | E | The EAN/UPC &2 determined for material &1 already exists in the catalog |
404 | E | Profile &1 does not exist |
405 | E | You can only maintain general field properties in Customizing |
406 | E | Item already exists: The date cannot be changed |
407 | E | Only partner type 'LS' is allowed for IDoc PriceCatalog |
408 | E | No catalog requires processing |
409 | E | Profile &1 does not exist - price determination not possible |
410 | E | An error occurred during download |
411 | E | An error occurred linking to your service |
412 | E | Error during assignment of catalog field &1 &2 |
413 | E | Value change in catalog field &1 &2 from &3 to &4 |
414 | E | Unit of measure &1 already exists for date &2 |
415 | E | A template customer must be entered before Internet release of catalog |
416 | E | Internet template customer &1 is not transferred |
417 | E | Posting error during saving of price catalog &1 |
418 | E | Engineering change management was started in the background |
419 | E | Catalog creation was started in the background |
420 | E | Start engineering change management |
421 | E | Internet template customer &1 does not have web release |
422 | E | An execution cannot be done in the background due to a lack of resources |
423 | E | Value change in catalog field &1 from &3 to &4 |
424 | E | You are not authorized to delete price catalog &1 |
425 | E | You are not authorized to create price catalogs |
426 | E | You are not authorized to use engin. change management for catalog &1 |
427 | E | You are not authorized to transfer price catalog &1 |
428 | E | You are not authorized to change price catalog &1 |
429 | E | You are not authorized to display price catalog &1 |
430 | E | Test BAdI: Field Net weight is not supplied with data |
431 | E | No entries found |
432 | E | Position the cursor on a valid line |
433 | E | Transfer ID not saved - engineering change management overwrites errors |
434 | E | Changed fields are overwritten by engineering change management |
435 | E | Customer &2 is not assigned to assortment &1 |
436 | E | &1 |
437 | E | Catalog field &1 in structure &2 was changed |
450 | E | Error saving SBC parameters for customer &1 |
451 | E | Error saving SBC parameters for customer &1 |
452 | E | Error deleting SBC parameters for customer &1 |
453 | E | SBC parameters for customer &1 are blocked |
454 | E | No SBC parameters exist for customer &1 |
455 | E | SBC parameters for customer &1 already exist |
456 | E | You are not authorized to create SBC parameters |
457 | E | You are not authorized to change SBC parameters |
458 | E | You are not authorized to display SBC parameters |
459 | E | You are not authorized to delete SBC parameters |
460 | E | Price catalog &1 processed without messages |
461 | E | Price catalog &1 processed. Messages contained in application log &2 |
463 | E | No reference material can be determined for EAN/UPC &2 |
465 | E | A partner number must be entered for partner type LS |
466 | E | A value for the scale base value can only be entered in value scales |
467 | E | A partner role is not allowed for partner type 'LS' for the IDoc PriceCat |
480 | E | Delete the assignment of the catalog type to structures |
481 | E | Only use structure types '01' to '09' |
482 | E | Structure & is not active |
483 | E | Structure & is no longer active |