This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.
Check it out on amazon.com →The Message Class SEPA (SEPA-Mandat: Nachrichten) is a standard Message Class in SAP ERP and is part of the package BF_SEPA.
Message Class | SEPA |
Short Text | SEPA-Mandat: Nachrichten |
Package | BF_SEPA |
ID | Language | Text |
---|---|---|
000 | D | &1 &2 &3 &4 |
001 | D | Systemfehler: &1 &2 &3 &4 |
002 | D | Systemfehler im Funktionsbaustein &1 &2 &3 &4 |
003 | D | Systemfehler in der Form-Routine &1 &2 &3 &4 |
004 | D | Systemfehler in der Form-Routine &1 des Programms &2 &3 &4 |
005 | D | Die Daten sind fehlerfrei |
006 | D | Interner Fehler: &1 &2 &3 &4 |
007 | D | Interner Fehler im Funktionsbaustein &1 &2 &3 &4 |
008 | D | Interner Fehler in der Form-Routine &1 &2 &3 &4 |
009 | D | Interner Fehler in der Form-Routine &1 des Programms &2 &3 &4 |
010 | D | Externe Mandats-ID kann nicht 12stellig numerisch sein |
011 | D | Aktion wurde abgebrochen |
012 | D | |
021 | D | Sie haben keine Berechtigung, Mandate anzulegen |
022 | D | Sie haben keine Berechtigung, Mandate zu ändern |
023 | D | Sie haben keine Berechtigung, Mandate anzuzeigen |
026 | D | Sie haben keine Berechtigung, Mandate für Buchungskreis '&1' anzulegen |
027 | D | Sie haben keine Berechtigung, Mandate für Buchungskreis '&1' zu ändern |
028 | D | Sie haben keine Berechtigung, Mandate für Buchungskreis '&1' anzuzeigen |
029 | D | Sie haben keine Berechtigung zum Lesen des Mandates &1 &2 &3 |
030 | D | Sie haben keine Berechtigung zum Ändern des Mandates &1 &2 &3 |
031 | D | Die Liste der anzulegenden Mandate ist leer |
032 | D | Die Liste der zu ändernden Mandate ist leer |
033 | D | Die Liste der anzuzeigenden Mandate ist leer |
034 | D | Sie haben keine Berechtigung eine globale Mandatssperre anzulegen |
035 | D | Sie haben keine Berechtigung eine globale Mandatssperre zu ändern |
036 | D | Sie haben keine Berechtigung eine globale Mandatssperre zu lesen |
037 | D | Die Liste der zu sperrenden Mandate ist leer |
038 | D | Das Mandat '&1' wird zur Zeit vom Benutzer '&2' bearbeitet |
039 | D | Es muss genau eine Angabe für die zu entsperrenden Mandate gemacht werden |
040 | D | Systemfehler beim Sperren, bitte Systembetreuer verständigen |
041 | D | Das Mandat '&1' wurde erfolgreich gesperrt |
042 | D | &1 Mandate wurden erfolgreich gesperrt |
043 | D | Das Mandat '&1' wurde erfolgreich entsperrt |
044 | D | &1 Mandate wurden erfolgreich entsperrt |
045 | D | Das Mandat '&1' wurde erfolgreich angelegt |
046 | D | &1 Mandate wurden erfolgreich angelegt |
047 | D | Das Mandat '&1' wurde erfolgreich geändert |
048 | D | &1 Mandate wurden erfolgreich geändert |
049 | D | Es wurde kein Formular für den Druck hinterlegt im Customizing |
050 | D | Daten des Buchungskreises '&1' werden für den Mandatsempfänger übernommen |
051 | D | Falsche Anwendung '&1' |
052 | D | In Anwendung '&1' ist Sendertyp '&2' nicht vorgesehen |
053 | D | In Anwendung '&1' ist Empfängertyp '&2' nicht vorgesehen |
054 | D | Buchungskreis '&1' ist für Debitor '&2' kein zahlender Buchungskreis |
055 | D | Debitor '&1' hat keine Bankverbindung mit der IBAN '&2' |
056 | D | Die IBAN '&1' gehört nicht zu der Bank mit dem BIC '&2' |
057 | D | Einmal-Mandat &1 wurde bereits verwendet und ist nicht mehr änderbar |
058 | D | Das Mandat &1 ist veraltet und daher nicht mehr änderbar |
059 | D | Veraltete Mandate sind nicht änderbar |
060 | D | Das Mandat '&1 / &2' wird zur Zeit vom Benutzer '&3' bearbeitet |
061 | D | |
062 | D | Für die Anwendung &1 ist keine Selektion über die UCI möglich |
063 | D | Für die Anwendung &1 ist die manuelle Anlage von Mandaten nicht möglich |
064 | D | Für die Anwendung &1 ist die manuelle Änderung von Mandaten nicht möglich |
065 | D | Mandat &1 ist bereits abgeschlossen, nur noch Anzeige möglich |
066 | D | Mandat-ID &1 enthält unzulässige Sonderzeichen |
090 | D | Archivierungsstichtag muß mindestens 90 Tage in der Vergangenheit liegen |
100 | D | Feld '&1' hat einen Wert ungleich '&2' |
101 | D | Gegensätzliche Verbuchungsanforderungen können nicht ausgeführt werden |
102 | D | Feld '&1' muss mit einem Wert gefüllt sein |
103 | D | Feld '&1' muss initial sein (und wird ggf. vom System gefüllt) |
104 | D | Ungültiges Zeitintervall: Untergrenze ist größer als Obergrenze |
105 | D | Unzulässiges Zeitintervall: Obergrenze '&1' liegt in der Vergangenheit |
106 | D | Status '&1' kann nicht fürs Anlegen eines Mandates verwendet werden |
107 | D | Status '5' nicht möglich, da in der Frist verwendet oder unterschrieben |
108 | D | Mandat '&1': Änderung ist nicht möglich, da Status '&2' ist |
109 | D | Mandat '&1': Beim Status '2'oder '4' kann nur der Status geändert werden |
110 | D | Mandat '&1': Keine Änderungen vorhanden |
111 | D | Mandat '&1': Es ist nicht möglich, den Änderungsgrund allein zu ändern |
112 | D | Zahlungsmodus kann nur '1 (einmalig)' oder 'N (mehrfach verwendbar)' sein |
113 | D | Mandate &1 besitzt keinen Änderungsgrund |
114 | D | Das Mandat &1, &2 ist nicht aktive |
115 | D | Das Mandat &1, &2 besitzt nicht die IBAN &3. |
116 | D | Mndate &1, &2: Letzte Verwendung gefüllt, erste nicht |
117 | D | Mandate &1,&2: Erste Verwendung ist größer als letzte Verwendung |
118 | D | Bei Mandatssperren IBAN und Kreditoridentifikation eingeben |
119 | D | Zu &1 und &2 existiert bereits eine Mandatssperre |
120 | D | Lockeintrag &1/&2 aufgrund von Sperre/Berechtigungen nicht möglich |
121 | D | zu löschende Mandatsperre nicht vorhanden. &1/&2 |
122 | D | Weder interner noch externer Mandatsschlüssel übergeben |
123 | D | Das Mandat &1/&2 ist global gesperrt |
124 | D | zu ändernde Mandatsperre nicht vorhanden. &1/&2 |
125 | D | Bitte Mandatskey für die Selektion der Verwendungen angeben |
126 | D | Globale Sperre angelegt. Alle Mandate mit IBAN/KreditorID angepaßt |
127 | D | Globale Sperre geändert. Alle Mandate mit IBAN/KreditorID angepaßt |
128 | D | Globale Sperre gelöscht. Alle Mandate mit IBAN/KreditorID angepaßt |
129 | D | Zur Gültigkeitsprüfung &1/&2 ist eine Datumsangabe erforderlich |
130 | D | Kein Änderungstyp für Änderung gefunden.&1/&2 |
131 | D | Feld &1 ist nicht änderbar |
132 | D | Kein externer Schlüssel gefüllt |
133 | D | Aktives Mandat &1/&2 benötigt das Datum der Unterschrift |
134 | D | Die Kreditorid &1 und die IBAN &2 sind gobal gesperrt |
140 | D | Eine Verwendung ist nur für die aktuelle Version des Mandates möglich |
141 | D | Datum, Belegtyp oder Belegnummer der Verwendung initial |
142 | D | Verwendungsdaten <> Mandatsdaten, &1/&2 |
143 | D | Mandat &1 wurde vor der Änderung nicht gesperrt |
144 | D | Die Sender IBAN des Mandates &1/&2 ist nicht korrekt |
145 | D | Der Swift-Code des Mandates &1/&2 ist nicht korrekt |
146 | D | Die Kreditoridentifikation &1 ist nicht gültig. |
147 | D | Mandat '&1' '&2' existiert noch in anderen aktiven Anwendungen als '&3' |
148 | D | Mandat '&1' '&2' existiert in mehr als einer aktiven Anwendung |
149 | D | Mandat '&1' '&2' '&3' ist nicht vorhanden |
150 | D | Mandat &1 ist nicht vorhanden |
151 | D | Es wurden keine Mandate selektiert |
152 | D | Das Mandat hat den internen Schlüssel &1 |
153 | D | Das Mandat &1 ist bereits vorhanden |
154 | D | Das Mandat &1 wurde angelegt |
155 | D | Mandat-ID muß angegeben werden |
156 | D | Das Mandat &1 wurde geändert |
157 | D | Es wurden &1 Mandate selektiert |
158 | D | Es wurden keine Selektionskriterien angegeben |
159 | D | Anwendung '&1' ist nicht aktiv |
160 | D | Das Customizing für die Mandatsverwaltung ist nicht gepflegt |
161 | D | Nur Anwendung &1 ist im Mandant & aktiv |
162 | D | Im Mandant &1 ist keine SEPA-Anwendung aktiv |
163 | D | Es wurde keine Anwendung selektiert |
164 | D | Es existiert keine globale Sperre für IBAN &1 Kreditor &2 |
165 | D | Geben Sie die Gültigkeit der globalen Sperre an |
166 | D | Das Feld &1 ist nicht änderbar |
167 | D | Bei Änderung von Feld &1 muß neue Version erzeugt werden |
168 | D | Das Feld Mandatsid ist nicht änderbar ( &1/&2) |
169 | D | Das Feld Anwendung ist nicht änderbar ( &1/&2) |
170 | D | Das Feld usprüngliche Mandatsid ist nicht änderbar ( &1/&2) |
171 | D | Das Feld ursprüngliche Kreditorenid ist nicht änderbar ( &1/&2) |
172 | D | Das Mandat &1/&2 ist zum Datum &3 nicht gültig |
173 | D | Mandatsid ist Mußfeld |
174 | D | Kreditoridentifikation ist Mußfeld |
175 | D | Die Mandatsid &1 kann nicht gelöscht werden, da verwendet |
176 | D | IBAN und Kreditoridentifikation erforderlich. ( globale Sperren) |
177 | D | Das Mandat &1 wurde zum Anlegen vorgemerkt |
178 | D | Die Änderung des Mandats &1 wurde vorgemerkt |
179 | D | Keine Mandate selektiert, weil Sel.Bedingungen unzureichend |
180 | D | Mandat &1 (Version &2) wurde in Zahllauf &3 erstmals verwendet |
181 | D | Mandat &1 Kreditor &2 bereits vorhanden |
200 | D | 200-250 reserviert für Auflisten von Mandaten |
201 | D | Nur Aktionstyp 'Anzeigen' oder 'Ändern' wird unterstützt |
202 | D | Geben Sie mindestens eine Änderung ein |
203 | D | Mandate &1 wurde inzwischen von anderem Prozess geändert |
204 | D | Mandate &1 wurde inzwischen von anderem Prozess gelöscht |
205 | D | Es liegt keine Änderung vor |
206 | D | Ein Mandat wurde zum Ändern vorgemerkt |
207 | D | &1 Mandate wurden zum Ändern vorgemerkt |
208 | D | Kein Feld ist für Massenänderung für die Anwendung &1 zugelassen |
209 | D | Bitte positionieren Sie den Cursor auf eine Zeile des Listkörpers |
210 | D | Fehler bei Zugriff auf ALV-Grid. Starten Sie die Transaktion noch mal |
211 | D | Keine Änderung wurde durchgeführt |
212 | D | Änderungen wurden gespeichert und dabei wurde ein Mandat geändert |
213 | D | Änderungen wurden gespeichert und dabei wurden &1 Mandate geändert |
214 | D | Das Änderungsprozess wurde abgebrochen |
215 | D | &1 Mandat(e) wurde(n) erfolgreich geändert |
216 | D | Es wurden keine Mandate zur Anzeige übergegeben |
217 | D | Kein Mandat wurde zum Anzeigen übergegeben |
218 | D | Von-Datum kann nicht nach dem Bis-Datum liegen |
219 | D | Geben Sie ein Von-Datum an |
220 | D | Geben Sie ausreichende Selektionskriterien an |
221 | D | Bestätigen Sie die geänderten Mandatsdaten |
000 | E | &1 &2 &3 &4 |
001 | E | System error: &1 &2 &3 &4 |
002 | E | System error in function module &1 &2 &3 &4 |
003 | E | System error in form routine &1 &2 &3 &4 |
004 | E | System error in form routine &1 of program &2 &3 &4 |
005 | E | The data contains no errors |
006 | E | Internal error: &1 &2 &3 &4 |
007 | E | Internal error in function module &1 &2 &3 &4 |
008 | E | Internal error in form routine &1 &2 &3 &4 |
009 | E | Internal error in form routine &1 of program &2 &3 &4 |
010 | E | External mandate ID cannot be 12 digit numerical |
011 | E | Action canceled |
021 | E | You are not authorized to create mandates |
022 | E | You are not authorized to change mandates |
023 | E | You are not authorized to display mandates |
026 | E | You are not authorized to create mandates for company code '&1' |
027 | E | You are not authorized to change mandates for company code '&1' |
028 | E | You are not authorized to display mandates for company code '&1' |
029 | E | You are not authorized to read mandate &1 &2 &3 |
030 | E | You are not authorized to change mandate &1 &2 &3 |
031 | E | The list of mandates to be created is empty |
032 | E | The list of mandates to be changed is empty |
033 | E | The list of mandates to be displayed is empty |
034 | E | You are not authorized to create a global mandate lock |
035 | E | You are not authorized to change a global mandate lock |
036 | E | You are not authorized to read a global mandate lock |
037 | E | The list of mandates to be locked is empty |
038 | E | Mandate '&1' is currently being processed by user '&2' |
039 | E | You must make only one entry for the mandates to be locked |
040 | E | System lock error: Inform system administrator |
041 | E | Mandate '&1' successfully locked |
042 | E | &1 mandates have been successfully locked |
043 | E | Mandate '&1' has been successfully unlocked |
044 | E | &1 mandates have been successfully unlocked |
045 | E | Mandate '&1' has been created successfully |
046 | E | &1 mandates have been created successfully |
047 | E | Mandate '&1' has been changed successfully |
048 | E | &1 mandates have been changed successfully |
049 | E | No form has been defined in Customizing for printing |
050 | E | Data for company code '&1' transferred for the mandate recipient |
051 | E | Wrong application '&1' |
052 | E | Sender type '&2' is not supported in application '&1' |
053 | E | Recipient type '&2' is not supported in application '&1' |
054 | E | Company code '&1' is not a paying company code for customer '&2' |
055 | E | Customer '&1' does not have bank details with IBAN '&2' |
056 | E | IBAN '&1' does not relate to the bank with BIC '&2' |
057 | E | One-time mandate &1 already used and can no longer be changed |
058 | E | Mandate &1 is obsolete and cannot therefore be changed |
059 | E | You cannot change obsolete mandates |
060 | E | Mandate &1/&2 is currently being processed by user &3 |
062 | E | You cannot use the UCI to make a selection for application &1 |
063 | E | You cannot create mandates manually for application &1 |
064 | E | You cannot change mandates manually for application &1 |
065 | E | Mandate &1 is already closed and can now only be displayed |
066 | E | Mandate ID &1 contains invalid special characters |
090 | E | Archiving key date must be at least 90 days in the past |
100 | E | Field '&1' has a value not equal to '&2' |
101 | E | You cannot execute contradictory update requests |
102 | E | Field '&1' must contain a value |
103 | E | Field '&1' must be initial (and is filled by the system if required) |
104 | E | Invalid time interval: lower limit is later than upper limit |
105 | E | Time interval not permitted: Upper limit '&1' is in the past |
106 | E | Status '&1' cannot be used to create a mandate |
107 | E | Status '5 not possible, as either used in the period or signed |
108 | E | Mandate '&1': no change possible as has status '&2' |
109 | E | Mandate '&1': with status '2' or '4' only the status can be changed |
110 | E | Mandate '&1': no changes exist |
111 | E | Mandate '&1': it is not possible to change only the change reason |
112 | E | Payment mode can only be '1 (one-time)' or 'N (multiple use)' |
113 | E | Mandate &1 does not have a change reason |
114 | E | Mandate &1, &2 is not active |
115 | E | Mandate &1, &2 does not have IBAN &3 |
116 | E | Mandates &1, &2: last usage filled but not first |
117 | E | Mandates &1,&2: first usage is later than last usage |
118 | E | Enter IBAN and creditor ID for mandate locks |
119 | E | A mandate lock already exists for &1 and &2 |
120 | E | Lock entry &1/&2 not possible due to lock/authorizations |
121 | E | Mandate lock to be deleted not available. &1/&2 |
122 | E | Neither internal nor external mandate key transferred |
123 | E | Mandate &1/&2 is globally locked |
124 | E | Mandate lock to be changed is not available. &1/&2 |
125 | E | Specify the mandate key for the selection of usages |
126 | E | Global lock created. All mandates with IBAN/Creditor ID adapted |
127 | E | Global lock changed. All mandates with IBAN/Creditor ID adapted |
128 | E | Global lock deleted. All mandates with IBAN/Creditor ID adapted |
129 | E | You must enter a date for the validity check &1/&2 |
130 | E | No change type found for change. &1/&2 |
131 | E | Field &1 cannot be changed |
132 | E | No external key filled |
133 | E | Active mandate &1/&2 requires the date of the signature |
134 | E | Creditor ID &1 and IBAN &2 are globally locked |
140 | E | Usage is only possible for the current version of the mandate |
141 | E | Date, document category or document number of usage initial |
142 | E | Usage data <> Mandate data, &1/&2 |
143 | E | Mandate &1 was not locked before the change |
144 | E | The sender IBAN of mandate &1/&2 is not correct |
145 | E | The SWIFT code of mandate &1/&2 is not correct |
146 | E | Creditor ID &1 is not valid |
147 | E | Mandate &1 &2 exists in active applications other than &3 |
148 | E | Mandate &1 &2 is in more than one active application |
149 | E | Mandate &1 &2 &3 is not available |
150 | E | Mandate &1 is not available |
151 | E | No mandate selected |
152 | E | Mandate has internal key &1 |
153 | E | Mandate &1 already exists |
154 | E | Mandate &1 created |
155 | E | You must specify the mandate ID |
156 | E | Mandate &1 changed |
157 | E | &1 mandates selected |
158 | E | No selection criteria entered |
159 | E | Application &1 is not active |
160 | E | Customizing for mandate management has not been maintained |
161 | E | Only application &1 is active in mandate & |
162 | E | No SEPA application is active in mandate &1 |
163 | E | No application selected |
164 | E | There is no global lock for IBAN &1 creditor &2 |
165 | E | Enter the validity of the global lock |
166 | E | You cannot change &1 field |
167 | E | New version must be created when field &1 is changed |
168 | E | You cannot change the mandate ID field ( &1/&2) |
169 | E | You cannot change the application field ( &1/&2) |
170 | E | You cannot change the original mandate ID field ( &1/&2) |
171 | E | The original creditor ID field cannot be changed (&1/&2) |
172 | E | Mandate &1/&2 is not valid at date &3 |
173 | E | Mandate ID is a required entry field |
174 | E | Creditor identifier is a required entry field |
175 | E | Mandate ID &1 cannot be deleted because it is in use |
176 | E | IBAN and creditor ID required (global locks) |
177 | E | Mandate &1 has been flagged for creation |
178 | E | The change to mandate &1 has been flagged |
179 | E | No mandate selected, as selection conditions insufficient |
180 | E | Mandate &1 (version &2) was used for the first time in payment run &3 |
181 | E | Mandate &1 creditor &2 already exists |
200 | E | 200-250 reserved for lists of mandates |
201 | E | Only the actions 'Display' or 'Change' are supported |
202 | E | Enter at least one change |
203 | E | Mandates &1 have been changed by another process in the meantime |
204 | E | Mandates &1 have been deleted by another process in the meantime |
205 | E | No changes were made |
206 | E | One mandate flagged for change |
207 | E | &1 mandates flagged for change |
208 | E | No field is permitted for mass change for application &1 |
209 | E | Position the cursor on a line in the list |
210 | E | Error in access to ALV grid. Start the transaction again |
211 | E | No change has been made |
212 | E | Changes saved, whereby one mandate has been changed |
213 | E | Changes saved, whereby &1 mandates have been changed |
214 | E | Change process terminated |
215 | E | &1 mandate(s) successfully changed |
216 | E | No mandates were transferred for display |
217 | E | No mandate was transferred for display |
218 | E | From-date cannot be after to-date |
219 | E | Enter a from-date |
220 | E | Specify a sufficient amount of selection criteria |
221 | E | Confirm the changed mandate data |